• International Journal of Korean Welding Society
• /
• 제2권2호
• /
• pp.57-60
• /
• 2002

Generally, the laser vision sensor makes it possible design a highly reliable and precise range sensor at a low cost. When the laser vision sensor is applied to lap joint welding, however. there are many limitations. Therefore, a specially-designed hardware system has to be used. However, if the multi-lines are used instead of a single line, multi-range data .:an be generated from one image. Even under a set condition of 30fps, the generated 2D range data increases depending on the number of lines used. In this study, a laser vision sensor with a multi-line pattern is developed with conventional CCD camera to carry out high speed seam tracking in lap joint welding.

• 한국산학기술학회논문지
• /
• 제14권5호
• /
• pp.2400-2405
• /
• 2013

본 연구에서는 스테레오비전 센서의 거리 정보와 컬러이미지를 합성하여 일정 거리 안에 있는 장애물을 탐색하는 방법을 제시하였다. 스테레오 비전 센서로 부터 취득한 깊이이미지(depth image)를 이용하여 거리 정보를 구하고 컬러 이미지와의 합성을 통해 모바일로봇 이동에 방해되는 장애물을 검출하였다. 검출된 장애물 정보는 모바일 로봇에 송신되어 무인이동장치로써 지역을 탐색하게 하여 깊이이미지 응용에 적용가능성을 평가하였다. 스테레오 비전 센서를 이용하는 무인이동장치의 성능을 평가하기 위해 장애물간의 거리에 대한 성능 평가를 하고 컬러이미지, 깊이이미지 그리고 합성이미지 유형에 따른 성능과 취득된 이미지 프레임의 수에 따른 성능도 살펴보았다. 처리 결과 깊이이미지에 비해 합성된 이미지가 개선된 성능을 보였다.

• Journal of Biosystems Engineering
• /
• 제36권1호
• /
• pp.48-57
• /
• 2011

The computer vision system was designed and constructed to measure the weight of a dairy cattle. Its development involved the functions of image capture, image preprocessing, image algorithm, and control integrated into one program. The experiments were conducted with the model dairy cattle and the real dairy cattle by two ways. First experiment with the model dairy cattle was conducted by using the indoor vision experimental system, which was built to measure the model dairy cattle in the laboratory. Second experiment with real dairy cattle was conducted by using the outdoor vision experimental system, which was built for measuring 229 heads of cows in the cattle facilities. This vision system proved to a reliable system by conducting their performance test with 15 heads of real cow in the cattle facilities. Indirect weight measuring with four methods were conducted by using the image processing system, which was the same system for measuring of body parameters. Error value of transform equation using chest girth was 30%. This error was seen as the cause of accumulated error by manually measurement. So it was not appropriate to estimate cow weight by using the transform equation, which was calculated from pixel values of the chest girth. Measurement of cow weight by multiple regression equation from top and side view images has relatively less error value, 5%. When cow weight was measured indirectly by image surface area from the pixel of top and side view images, maximum error value was 11.7%. When measured cow weight by image volume, maximum error weight was 57 kg. Generally, weight error was within 30 kg but maximum error 10.7%. Volume transform method, out of 4 measuring weight methods, was minimum error weight 21.8 kg.

• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.5130-5133
• /
• 2013

입체영상 디스플레이는 최근 교육, 3D 영화, 의료 영상 등 다양한 분야에 응용되고 있으나 실용화함에 있어 해결해야할 문제점도 남아있다. 입체영상 디스플레이는 실용화 단계에서 대량의 영상 데이터를 처리해야하고 실시간 디스플레이를 위해 고효율 비젼 시스템을 설계해야 한다. 입체영상 디스플레이를 위한 스테레오 데이터는 변위 벡터, 움직임 벡터와 참조영상과의 오차영상을 전송하게 되며 스테레오 영상 시퀀스를 복원하여 입체영상 디스플레이를 하게 된다. 이를 위한 핵심요소는 스테레오 영상간의 효율적인 정합과 강건한 비젼시스템에 있다. 본 논문에서는 효율적인 스테레오 정합을 위한 고효율 비젼시스템을 설계하고 실험결과 제안한 입체영상 디스플레이 시스템의 효용성을 검증한다.

• Current Optics and Photonics
• /
• 제6권6호
• /
• pp.608-618
• /
• 2022

By analyzing the signal-to-noise ratio (SNR) theory of the conventional true color night vision system, we found that the output image SNR is limited by the wavelength range of the system response λ₁ and λ₂. Therefore, we built a double-channel four-band true color night vision system to expand the system response to improve the output image SNR. In the meantime, we proposed an image fusion method based on principal component analysis (PCA) and nonsubsampled shearlet transform (NSST) to obtain the true color night vision images. Through experiments, a method based on edge extraction of the targets and spatial dimension decorrelation was proposed to calculate the SNR of the obtained images and we calculated the correlation coefficient (CC) between the edge graphs of obtained and reference images. The results showed that the SNR of the images of four scenes obtained by our system were 125.0%, 145.8%, 86.0% and 51.8% higher, respectively, than that of the conventional tri-band system and CC was also higher, which demonstrated that our system can get true color images with better quality.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.83-83
• /
• 2000

Recently, Vision system has being used all around industry. Sensor systems are used for Mark Reader, for example, optical scanning is proximity sensor system, have many disadvantages, such as, lacking user interface and difficulty to store original specimens. In contrast with this, Vision systems for Mark Reader has many advantages, including function conversion to achieve other work, high accuracy, high speed, etc. In this thesis, we have researched the development of Mark Reader by using a Vision system. The processing course of this s)'stem is consist to Image Pre-Processing such as noise reduction, edge detection, threshold processing. And then, we have carried out camera calibration to calibrate images which are acquired from camera. After searching for reference point within scanning area(60pixe1${\times}$30pixe1), we have calculated points crossing by using line equations. And then, we decide to each ROI(region of interest) which are expressed by four points. Next we have converted absolute coordinate into relative coordinate for analysis a translation component. Finally we carry out Mark Reading with images classified by six patterns. As a result of experiment which follows the algorithm has proposed, we have get error within 0.5% from total image.

• 한국레이저가공학회지
• /
• 제12권1호
• /
• pp.19-24
• /
• 2009

Because of its fast and precise welding performance, laser welding is becoming a new excellent welding method. However, the precise focusing and robust seam tracking are required to apply laser welding to the practical fields. In order to laser weld a type of T joint like a circular pipe on a square pipe, which could be met in the three dimensional structure such as an aluminum space frame, a visual sensor system was developed for automation of focusing and seam tracking. The developed sensor system consists of a digital CCD camera, a structured laser, and a vision processor. It is moved and positioned by a 2-axis motorized stage, which is attached to a 6 axis robot manipulator with a laser welding head. After stripe-type structured laser illuminates a target surface, images are captured through the digital CCD camera. From the image, seam error and defocusing error are calculated using image processing algorithms which includes efficient techniques handling continuously changed image patterns. These errors are corrected by the stage off-line during welding or teaching. Laser welding of a circular pipe on a square pipe was successful with the vision tracking system by reducing the path positioning and de focusing errors due to the robot teaching or a geometrical variation of specimens and jig holding.

• 한국지능시스템학회논문지
• /
• 제15권5호
• /
• pp.560-566
• /
• 2005

본 논문은 유비쿼터스 이동로봇의 자기위치인식에 적용되는 비젼시스템의 왜곡된 영상을 보정하기 위한 실용적인 방법을 제안하다. 이동로봇에서 자기위치인식은 필수적인 요소이며 카메라 비젼시스템을 이용하여 처리 가능하다. 자기위치인식에서 비젼시스템은 넓은 시야를 확보하기 위해 어안렌즈를 이용하는데, 이는 영상의 왜곡을 발생한다. 또한 이동로봇은 지속적인 움직임을 가지므로 빠른 시간 내에 영상을 처리하여 자기위치를 인식해야 한다. 따라서 이동로봇에 적용 가능한 실용적인 영상왜곡 보정기법을 제안하고 실험을 통하여 성능을 검증한다.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.126-134
• /
• 1997

In this study, We made visual inspection system using Vision Board. It is consist of an illuminator (a fluorescent lamp), image input device (CCD (Charge-Coupled Device) camera), image processing system(Vision Board(FARAMVB-02)), image output device (video monitor, printer), and a measuring instrument(TELMN1000). Length measurement by visual inspection system make use of 100mm guage block(instead of calculating distance between a camera and a object). It measured horizontal and vertical length factor from 400mm to 650mm by increasing 50mm. In this place, measured horizontal and vertical length factor made use of length measure- ment of a injection. A measuring instrument used to ompare a measured length of a injection visual inspection system with it. In conclusion, length measurement of a injection compared a measuring instrument with visual inspecion system using length factor of 100mm gauge block. We find that maximum error of length is 0.55mm when it compar with the measuring value of two devices(FARAMVB-02, TELMN1000). Program of visual inspection system is made up Borland C++3.1.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.115-120
• /
• 2000

This study is on the application the image processing algorithm for inspection of the aluminium mill strip surface defect. The image of surface defect data was obtained using the CCD camera with the digital signal board. The edge was found from the difference of pixel intensity between the normal image and defect image. Two step were taken to find the edge in the image processing algorithm. First, noise was removed by using the median filter in the image. Second, the edge was sharpened in detail by using the sharpening convolution filter in the image. Canny algorithm was used to defect the exact edge. The defect section was separated from the original image is to find the coordination point p1 and p2 which include the defect image