• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제5권9호
• /
• pp.441-450
• /
• 2016

본 논문에서는 인터랙티브 미디어 작품과 관객이 상호작용 하는 방법을 설명하는 상세수준이 관람자의 흥미에 미치는 영향을 분석하였다. 상호작용 방법을 관람자가 아는 것은 입력 장치에 대한 시지각적인 노출 및 관람자의 인지에 대한 사항으로 '인지적 어포던스'와 관련된다. 원활한 상호작용을 위해서 상호작용 방법을 명확하게 제시하면 관람자의 미적 체험으로 이끄는 호기심과 흥미가 오히려 반감될 수 있다고 보았다. 따라서 인지적 어포던스를 향상시키는 것이 항상 옳은 것은 아닐 수 있다고 보고 인지적 어포던스가 관람자의 인터랙션과 흥미에 미치는 영향을 살펴보았다. 이에 대한 연구를 위해서 두 가지의 가설을 세웠다. 첫째, 인터랙션 방법에 대한 설명이 명시적일수록 상호작용 방식에 대한 관람자의 이해도가 높아진다. 둘째, 인터랙션 방법에 대한 설명이 명시적일수록 관람자의 흥미는 떨어진다. 검증을 위한 실험으로 일상적으로 접하기 쉬운 터치 인터랙션 기술을 적용한 인터랙티브 미디어 아트 작품을 제작하였다. 작품은 시지각적 인터랙션 제시 정도를 달리한 세 가지 타입으로 제작하였다. 즉, 작동방식을 명시한 타입과 터치를 유도하는 은유적인 수준을 달리하는 두 가지 타입을 포함한 총 세 가지 타입으로 미디어아트 작품을 제작하였다. 참여자에게 각 타입의 작품을 제시, 각 참여자의 관람시간을 측정하고 흥미와 만족도에 대한 설문조사를 실시했다. 실험결과 인터랙션에 관한 명시성이 높은 타입에서 참가자의 관람시간이 길고 참여도와 흥미가 높은 것으로 파악되었다. 반면 인터랙션 방식이 명시적이지 않는 경우일수록 흥미와 만족도가 낮은 것으로 파악되었다. 따라서 두 번째 가설이 잘못되었음을 알 수 있었다. 인지적인 어포던스가 향상될수록 작품에 대한 사용성과 더불어 흥미가 높아진다는 사실을 본 실험을 통하여 간접적으로 확인할 수 있었다. 따라서 인지적 어포던스가 떨어질 경우 콘텐츠에 관한 관람자의 흥미가 낮아질 수 있기 때문에 예술작품 기획 시 명확한 작품 설명을 통하여 관객의 참여도를 높일 수 있음을 확인하였다.

• 고전문학과교육
• /
• 제32호
• /
• pp.159-191
• /
• 2016

본 논문에서는 필자가 서울시내 A대학에서 2014년 2학기 국어국문학과 전공선택 과목인 <고전과 창작> 수업시간에 실시한 강의에 근거하여, 수업시간에 실행한 재창작 수업의 과정을 소개하고, 그 과정에서 보여주는 대학생들의 자기성찰 양상을 탐색하고자 하였다. 수업에 참여한 대학생들이 3회의 발표를 통해 만들어낸 작품을 주 분석 대상으로 삼았다. 2장에서는 고전작품 재창작을 위한 수업 진행의 과정으로서 '재창작 작품 선정 배경 및 기획의도 발표', '원작에 대한 분석 및 재창작 사례 탐색', '작품 재창작 및 메타글쓰기'에 대해 논의하였다. 3장에서는 작품 재창작 과정을 통한 대학생의 자기성찰 양상을 탐색해보았다. 학생들이 재창작하고자 하는 고전 작품을 선정하고, 분석하고, 재창작하고, 재창작한 작품에 대한 자기평가에 이르는 과정을 통해서 그들이 가지고 있는 삶에 대한 태도가 어떠한지, 문제가 있다면 그 문제를 대하는 태도와 경향성은 어떠한지 살펴보는 데 역점을 두었다. 수업에 참여한 학생들은 재창작의 대상으로 제각기 서로 다른 작품을 선택하였지만, 이번 논의에서는 <심청전>을 재창작한 두 명의 대학생을 대상으로, 그들이 창작한 작품과 자기 성찰 양상을 비교분석하였다. 그리하여 아버지와의 관계 양상에 따른 창작결과물의 특성에 대해 살펴볼 수 있었다. 고전을 활용한 보다 효과적인 재창작 수업을 위해 작품을 선정하고 보다 체계적이고 다양한 재창작 방법론에 대한 모색이 필요할 것이다. 그러나 고전을 활용한 재창작 수업은 원작의 작품서사를 활용하기 때문에 창작에 대한 부담을 줄일 수 있었고, 자기성찰의 매개가 되는 고전작품을 통해 평소 본인이 고민하는 문제에 대한 깊이 있는 탐색이 가능하다. 또한 공개적인 작품 발표를 통해 보다 객관적인 입장에서 자기서사를 탐색할 수 있고, 피드백을 통해 다른 사람의 의견을 수렴하는 것이 가능하다는 점을 확인할 수 있었다.

• 벤처혁신연구
• /
• 제4권2호
• /
• pp.97-108
• /
• 2021

근로계약은 형식상으로는 노동력상품과 임금의 교환관계로서 나타나지만, 단순한 물물교환의 차원을 초월하는 것이기 때문에 경제학적으로 노동력상품과 화폐의 교환관계로서 '매매'로서 파악하는 것도 가능하고 '임대차'로 파악할 수도 있다. 상품교환관계를 법적인 측면에서 보면, 노동력과 임금의 교환관계를 합법적으로 지지하고 그것에 구속력을 부여하여 강제화하는 법적인 장치가 계약이다. 이러한 근로계약은 임금을 수령하고, 임금의 수령의 반대급부로 일정한 시간을 사용자의 지휘·감독하에 두는 관계를 가져오게 하였다. 근로시간은 자신의 노동력을 사용자의 처분권하에 둔 종속시간이기 때문에 장시간의 근로는 근로자의 건강과 안전을 위해할 수 있고, 더 나아가 인간으로서 누려야 할 가치를 침해하는 행위가 될 수 있음으로 그 규제가 필요하다고 할 것이다. 근로시간의 단축은 인간의 생체적 한계를 설정하고, 확대 재생산을 할 수 있도록 생산적 측면에서 근로자의 문화에 대한 향유와 인간으로서 삶의 질을 확보하는 사회적인 측면에서 단축이 필요하지만, 사용자의 기업 경영상의 노동력 확보와 생산 활동 및 자본주의 국가에서 추구하는 것과 비교하여 이 둘의 양립을 할 수 있어야 한다. 근로시간은 개인에게서의 시간과 사회전체에서의 시간으로 볼 수 있고, 개인적인 차원에서 장시간 근로는 개인에게서의 시간은 줄어들게 되어 개인적 차원에서는 바람직하지 않지만, 사회전체적인 차원에서 생산 활동에 투입시간의 증대로 인한 생산물의 증가는 사회발전에 도움이 될 수 있다. 근로시간은 이러한 개인적 차원과 사회적 차원에서의 균형을 찾아간다는 측면에서 근로시간을 고찰하는 것이 필요하다. 근로시간의 규제방법이 근로시간의 시작과 근로시간의 종료에 대한 것으로 근로시간의 총량을 규제하는 것이었다면, 근로시간의 유연화, 탄력화는 근로시간의 총량을 1주 최대 52시간의 범위 내에서 범위를 한정하면서 기업의 새로운 업무의 출현에 따라 근로시간을 탄력적으로 배분하고 편성하는 것이 가능하도록 하는 근로시간의 질적인 규제방식이다. 이에 따라 근로시간은 단축하되 기업의 상황에 따른 유연근로시간제를 확대하여 시행하는 것이 필요하다. 이를 위하여 현재 6개월로 제한되어 있는 탄력적 근로시간제의 운용의 폭의 유연화와 사용자와 근로자간의 합의에 의한 선택적 근로시간제의 실 근로시간에 대한 처리, 정보통신 기술의 발전과 4차 산업혁명에 기반한 새로운 근로형태에 출현에 따른 재량근로시간의 대상 업무를 확대하는 것이 필요하다.

• Nuclear Engineering and Technology
• /
• 제39권5호
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• 마케팅과학연구
• /
• 제19권3호
• /
• pp.49-61
• /
• 2009

本文为执行官提供了他们在处理日常业务问题和市场机会时如何阐述自己思考过程的培训. 本研究建立在Schank提出的教学基础上, 包括: (1)经验学习和最好的指导提供给学习者从诸如全球背景, 团队项目和专家经历等的互动的故事提炼知识和技能的机会. (2) 告诉不会导致学习, 因为在学习需要的行动训练环境中, 应强调积极使用故事, 案例和项目. 每个培训案例包括执行官解释自己的决策系统分析(DSA, 还需要执行官做DSA简报. 在训练时要求执行官写DSA简报. 在执行官学员写书面报告的说明中包括(1) DSA路线图的本质的细节(2) 警告和机会的陈述, 读者的行政地图及图内的DSA解释. 该报告的最大长度为500字, 其规则就是使行政人员培训课程行之有效. 引言之后是第二部分文献综述, 简要地总结了有关人们在对问题和机会的背景下的想法及文献. 第三部分通过使用对不同的贴牌生产客户定价相同的化学产品的培训练习来解释DSA的起源和过程, 第四部分展示一个炼油设备公司订价决策的培训练习. 第五部分提供一个商业客户办公家具采购的市场策略案例. 第六部分是结论和建议. 这些建议是关于使用培训课程和发展其他培训课程来磨练执行官制定决策的能力. 文章引导读者利用工具箱研究综合的报告, (DSA)路线图根据生态合理性理论将战略与环境相匹配. 这三个案例的研究让学习者在意愿层面征求建议来作出决策. Todd and Gigerenzer 提出人们使用简单启发式,因为他们在自然的决策环境中通过探索信息的结构使适应性行为有可能产生. "简单是一种美德, 而不是诅咒", 有限理性理论强调了西蒙的命题中心, "人类理性的行为仿佛一把剪刀, 其刀片则是任务环境的结构和执行者的计算能力". Gigerenzer的观点和西蒙的环境的危害相关, 也和本文中三个环境结构的案例相关. "环境这个词, 在这里, 并不是指总的物理和生理的环境, 而只是指被给予需要和目标的重要有机体 本文关注了结合任务环境的结构和使用适应的工具箱启发的报告. (DSA)路线图根据生态理性理论将战略与环境相匹配. 渴望适应理论是这一方针的核心. 渴望适应理论将决策制定作为一个没有把目标整合的多目标问题模拟成一个把所有决策选项进行完全的优先顺序化. 这三个案例研究让学习者在意愿层面征求建议来作出决策. 渴望适应用一系列的调整步骤的形式. 一个调整步骤通过仅一个目标变量的变化就可以改变在渴望网格上邻近点当前的渴望水平. 上调步骤是目标变量的提高, 下调步骤是目标变量的下降. 创造和使用渴望适应水平是对有限理性理论的整合. 文章通过提供学习者经验和实践环节增加了意愿采纳和有限合理性的理解和特点. 利用DSA图排列CTSs和撰写TOP可以清晰和深化Selten的观点 "清晰, 意愿采纳必须作为研究的解决方案整合到整个蓝图中". 这些有限理性的研究许可了在现实生活中为什么, 如何作决策的理论和在自然的环境中利用启发式的学习训练两方面的发展. 本文中的练习鼓励根据不同使用目的学习快速而简洁的启发式技巧和原则. 这也正回应了Schank的思想 "从本质上来看, 教育不是让学生们知道发生了什么, 而是让他们感受到所发生的事情. 这不容易做到. 在如今的学校教育是没有情感的, 这是一个很大的问题". 这三个案例和附加的练习问题遵守了Schank的观点. "这种教育过程最好是通过参与他们其中来实现, 也可以这样认为, 精神层面的积极讨论".

• 복식
• /
• 제32권
• /
• pp.293-312
• /
• 1997

Deconstructionism is a philosophical stream in the latter half of 20'th century which goes against western metaphysics and tries to deconstruct the dualism e.g. eastern/west-ern man/woman. Its main concepts are 'indi-vidual' 'other' 'difference' 'restoration of the repressed' 'decentralization' 'Today it shows strong influences in literature art, and other social fields. This study investigated inner meanings and exterior forms represented in clothing on the base of Jacques Derrida's theory in order to re-search modes of deconstruction in is. And it compared clothing with architecture among other genres of art in order to discover similarities between through and modes of art in a certain period. For illuminating concept of deconstruction I referred to the literatures of preceding studies and for deconstruction's characteristics in both clothing and architec-ture I referred work's collection book $\ulcorner$collec-tions$\lrcorner$ and other related books dealing from 1960's to this point. As a rsult there are four modes of decons-truction in both clothing and architecture as follows; 1) Differenance which is a concept of the dif-ference in time and space as being trace. 2) In termeaning of meanings which is not present in reality but re-interpreted a new in the future. 3) Interxtuality in which a texte is not alone but with others 4) Dis.De phenomenon in which distortion and fragmentation forms occur as the result of the denial of perfection and reson. There are characteristics of modes of de-construction in clothing as follows; 1) Differance; R.Gigli, P. Rabanne. G.Bersace, V.Westwood are representatives of the cloth-ing which is combined with the past the pres-ent and the future or is re-viewed as the clothing of the past in the present point of view. J. Watanabe R. Dawakubo I miyake are representatives of the clothing which is out-date but re-viewed in the sense of recollec-tion and re-usage. 2) Intermeaning of meanings: R. kawakubo I, Miyake Y,Yamamoto are representatives of the clothing which is incomplete but re-interpreted in the future and appears to be new-fashioned according to ways of bnding wearing throwing on and tying J.C. Castel-bajac K.Hamnett S.Sprouse are representa-tives of the clothing which is made up of ab -stract forms scribbling or symbolic letters which appears to be different according to view-point of observers. 3) Intertextuality ;J.P.Gaultier K.Hamnett, Comme des Gar ons are representatives of intertextuality of gender which avoids the 여-ality of man/woman J.P Gaultier G,Versace J. galliano are representatives of the intertex-tuality of time place and occasion which mixes temporality extensity and purposiveness. J.P Gaultier G,Versace are representatives of the intertextuality of coordination which combines items different in image purpose and use. P.Rabanne A,Courr ges R,Gernreic I,Miyake are representatives of the intertextuality of mat-ter which uses heterogeneous matter different from cloth. 4) Dis.De-phenomenon: R, Kawakubo I.Mi-yake J.P.Gaultier are representatives of the de-composition which discloses distortion and exag-geration of form through destructing the estab-lished way of construction J.Galliano R.Kawa-kubo Devota Y Lomba arte representatives of the decentring which restores the repressed and the alienated on the one hane and shows front-centrality on the other. Comme des Gar ones is representative of the discontinuity because of which right and left up and down are not in har-mony with one another. J,Galliano J.P,Gaultier T,Mugler are representatives of the disruption by way of which one makes one's body exposed through intentional slashes or holes. As a consequence deconstructionism enabled us to investigate similarities between through of deconstruction and modes of art interms of diffrance Intermeaning of meanings intertextuality and Dis De-phenomenon. And we found that deconstruction was a phase of development in that it as a all-comprising and multiple concept tries to pursue the new through deconstruction.

• 한국보건간호학회지
• /
• 제4권1호
• /
• pp.37-55
• /
• 1990

Every country in the world has been trying to expand the basic health right for the peoples as W.H.O has established the goal 'health for AU' by the year of 2000. Related to this goal, our government authority has establish the policy 'the insurance of health for all' into effect from July 198\). Recently hospitalshave been making a ceaseless effort for the plan for the rationalization of its management the academic World is making it a subject of discussion by doing the secure of manpower at a resonable level and the increase of productivity by the manpower. As a result of the efforts the study was established to secure the numbers of nursing manpower at a resonable level and use the unskilled persons at the utilizing field and seek the possible area of their activity for more efficient service through the investigation of ablity of simple nursing activities of regiestered nurses and nurse aides for rational function according to the educational levels and talents. The method of study was established by the registered nurses and nurse and nurse aides(R.N 229, N.A 226) who are working in 15 hospitals with over 200 beds. This surrey was conducted from Mar 29, 1989 to April 8, 1989. The method to test the degree of importance, difficulties, and the abillity of performance of a simple nursing activities was classified into 35 activities on the basis of references on this field. The degree of importance was composed from point l(Not so important) to 5(Very important). the degree of difficulties. was composed as follows; very easy - Point 1 very difficult and complicated - Point 5. and the ability of performance was composed from point 1 to 5. The materials gathered through the survey were analyzed with frequency, mean standard deviation, percentage. t-test, Anova, pearson's coefficient of correlation, stepwise multiple regression. factor analysis, discriminant analysis. The obtained results are summarized as follows: 1. The recognition values of the simple nursing activities of each group of registered nurse and nurse aides show; The degree of importance; 4.04 and 4.26 The degree of difficulties; 2.72 and 2.94 The ability of performance; 2.07 and 2.38 The brief summary shows there are little differences between who two groups the simple nursing activities turned out to be easy and simple work. 2. Regardless of the degree of importance, and difficulties, the ability of performance the important in fluencing of the degree of the simple nursing activities between the registered nurses and nurse aides was the order of educational level, hospital career, working career in wards and ages of the registered nurses and ages and hospital creer of nurse aides. The result was that the simple nursing activities could easily be familiar through the training of their working environment and period of experience. 3. Among the 35 simple nursing activities the items capable of resonable entrusting to the nurse aides are 5 that is helping bed-bathing, 8itz Bath, using bed pan, care while delivering patient, accompaying patient when visitor's check. There wasn't and differences between RN and nurse aides in performing the above 5 items. In anywhere. so we can say obviosuly that this nursing activities should be performed under the nursing system of which chief of nurse are supposed to supervise nurse aides as a possible function to be entrusted. In view of the above mentioned results, therefore, this partial functional job of the simple nursing activities can able be entrusted to the nurse aides through the regular training course. In case of these functional activities could be entrusted under, the responsibility of registered nurse, we can able suggest to for that there are the following advantages: 1.. In the nursing activities-affairs, the qualified guarantee of the nursing services can be kept and increased or promotoed with accommodation of the required nursing service and roles being expanded presently. 2. In the productivity of the hospital manpower, therefore, we have comt to view and consider in favourly that when an automational administration times would be come in the near future time to hospital affairs as a reality, to utilize the existing nures aides is better rather than investing so as to develop the other source manpowers or seek its for the efficient business management in the operational strategy or its policy.

• Journal of Biosystems Engineering
• /
• 제4권2호
• /
• pp.10-24
• /
• 1979

It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist\ulcornerure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres\ulcornerhing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr\ulcorneresher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.

• Journal of Biosystems Engineering
• /
• 제4권2호
• /
• pp.9-9
• /
• 1979

It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist?ure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres?hing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr?esher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.

• 대중서사연구
• /
• 제26권4호
• /
• pp.9-41
• /
• 2020

이문열의 동명의 단편소설을 영화화한 박종원의 데뷔작 <구로아리랑>은 1987년 민주화의 흐름을 타고 노동자의 관점에서 노동 투쟁을 다룬 최초의 제도권 노동영화이자, 그동안 스크린이 외면해 온 여성 노동자의 재현이라는 측면에서 선구적인 작품이다. 박종원은 노동 문제와 관련하여 당시에 여전히 굳건하게 서 있던 레드컴플렉스의 장벽을 뚫고 사회의 이념 지형의 중추를 이루는 중산층을 설득하고자 하며, 진보의 메시지를 중산층 대중이 받아들일 수 있는 형태로 전달하기 위해 계급적 적대나 투쟁이 아니라 보편적 인간성과 윤리와 결부된 문제로 치환하는 감성에 의지한다. 박종원은 이러한 감성을 '상식적인 일반인의 감각'이라고 부르며 그 보편성과 객관성을 강조한다. 이 연구는 <구로아리랑>에서 노동 문제를 제도권 상업 영화 속에서 대중이 받아들일 수 있는 형태로 다루기 위해 어떤 전략을 취하는지, 또 그러한 전략에 반영된 '상식적인 일반인의 감각'이 어떤 이데올로기적 함의를 지니는지를 비판적으로 고찰해보고자 한다. 이를 위해 본론의 첫 번째 장에서는 영화가 원작 소설의 아이러니를 해체하고 인물의 구도를 순수한 선인과 악인의 대립으로 재설정하여 선인이 희생양이 되는 멜로드라마적 구성을 만들어낸다는 것을 밝힌다. 이로써 관객에게 노동자들이 겪는 비극에 강한 정서적 공감과 연대의식을 불러일으키려 한다. 두 번째 장에서는 영화의 다양한 장면과 에피소드들이 동정과 애도의 모티브로 수렴되며, 이는 대부분 당시 커다란 대중적 반향을 일으킨 문화적, 현실적 경험과 사건을 토대로 하고 있다는 점을 보일 것이다. 특히 영화의 마지막 결정적 장면에서는 87년 6월 항쟁의 기억이 강력하게 소환된다. 이에 따라 <구로아리랑>은 검증된 동정과 애도의 패치워크와 같은 양상을 보인다. 세 번째 장은 노동자들이 결정적인 투쟁에 나서는 대목에서 임금에 대한 요구를 스스로 뒤로 돌리고 인간적 신뢰와 대우의 문제를 앞세운다는 영화의 설정이 가지는 함의를 검토한다. 그것은 노동 문제의 정치적 차원을 제거하고 이를 윤리적 문제로 환원함으로써 모두가 인정할 수밖에 없는 보편적인 가치와 정서에 호소한다. 그러나 문제의 층위를 계급적 이해 관계의 충돌을 피해 순수한 인간성의 차원으로 옮기는 과정에서 노동자는 한 편으로는 깊이 동정할 만한 수동적 희생자의 위치에 떨어지고, 다른 한 편으로는 현실에 초연한 지사적 태도와 자제심을 갖춘 투사로 이상화된다. 영화는 이로써 현실적 설득력을 상실하며 영화 자체로서의 서사적 개연성도 약화된다. 중산층과의 연대를 환기하는 87년 항쟁의 기억은 영화 속에 조화롭게 통합되지 못하고 패치워크적 전체의 일부로 남는다.