• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.40-47
• /
• 2015

We propose a method to provide a selective VoD service during live streaming sessions. In the proposed method, each peer joined the live streaming session receives video stream packets with P2P manner and stores the packets to provide a VoD service. To mitigate the overhead of each peer node to store the video stream packets, the proposed scheme categorizes peers into three different groups based on their link types. To increase data gathering speed and reduce the network load, we also proposes the P2P transmission scheme within the same AP network for the peers with Wi-Fi link. To evaluate the performance of the proposed method, we implement computer simulator using NS-3. Simulation results show that the proposed method reduces the overhead about 66% and increases the P2P data gathering speed about 50% compared to the conventional schemes.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.7
• /
• pp.97-106
• /
• 2012

Management of biosignal data in mobile devices causes many problems in real-time transmission of large volume of multimedia data or storage devices. Therefore, this research paper intends to suggest an m-Health system, a clinical data processing system using mobile in order to provide quick medical service. This system deployed health system on IP network, compounded outputs from many bio sensing in remote sites and performed integrated data processing electronically on various bio sensors. The m-health system measures and monitors various biosignals and sends them to data servers of remote hospitals. It is an Android-based mobile application which patients and their family and medical staff can use anywhere anytime. Medical staff access patient data from hospital data servers and provide feedback on medical diagnosis and prescription to patients or users. Video stream for patient monitoring uses a scalable transcoding technique to decides data size appropriate for network traffic and sends video stream, remarkably reducing loads of mobile systems and networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1780-1784
• /
• 2015

Traditional IP routing, see only the Destination Address When Forwarding Layer 3 routing and exchange information and Destination-Based Routing Lookup is required for all Hop. Thus, all routers Full Internet routing information, the route information of more than about 120,000 may require. Therefore, the router configuration, which can be dispersed in the environment, the traffic load is required in accordance with this congestion. In this study, a unique characteristic of the Internet in the environment of an existing network Best Effect for QoS guarantee and hardware high speed switching of large multimedia data transmitted using a Labeling for forwarding a packet environment configuration is required. Video Stream Broadcast Transport Labeling rather than in much of the higher performance of the multi-step policy to most of the Video Stream Packet deulim was fixed to Labeling Header Format proposes a method of applying an effective QoS policy to a more simplified policy.

• The KIPS Transactions:PartB
• /
• v.13B no.3 s.106
• /
• pp.245-254
• /
• 2006

In this work, a new rate control algorithm for transmission of H.264/AVC video bit stream through CBR(constant bit rate) channel is proposed. The proposed algorithm predicts target bit rate and MAD(mean of absolute difference) for current frame considering image complexity variance between neighboring backward and current images. In details, respective linear regression analysis for MAD and encoded bit rate against image complexity variance produce correlation parameters. Additionally, it uses frame skip technique to maintain bit stream within a manageable range and protect buffer from overflow or underflow. Implementation and experimental results show that the proposed algorithm can provide accurate bit allocation, and can effectively visual degradation after scene changes. Also our proposed algorithm encodes the video sequences with less frame skipping compared to the existing rate control for H.264/AVC.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.29-37
• /
• 2008

To transmit video bit stream over low bandwidth such as wireless channel, high compression algorithm like H.264 codec is exploited. In transmitting high compressed video bit-stream over low bandwidth, packet loss causes severe degradation in image quality. In this paper, a new algorithm for recovery of missing or erroneous motion vector is proposed. Considering that the missing or erroneous motion vectors in blocks are closely correlated with those of neighboring blocks. Motion vector of neighboring blocks are clustered according to average linkage algorithm clustering and a representative value for each cluster is determined to obtain the candidate motion vector sets. As a result, simulation results show that the proposed method dramatically improves processing time compared to existing H.264/AVC. Also the proposed method is similar to existing H.264/AVC in terms of visual quality.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.155-160
• /
• 2005

In this paper, the channel decoder promising reliable data retrieving in noisy holographic channel has been developed for holographic WORM(write once read many) system. It covers various DSP(digital signal processing) blocks, such as align mark detector, adaptive channel equalizer, modulation decoder and ECC(error correction code) decoder. The specific schemes of DSP are designed to reduce the effect of noises in holographic WORM(H-WORM) system, particularly in prototype of DAEWOO electronics(DEPROTO). For real time data retrieving, the channel decoder is redesigned for FPGA(field programmable gate array) based hardware, where DSP blocks calculate in parallel sense with memory buffers between blocks and controllers for driving peripherals of FPGA. As an input source of the experiments, MPEG2 TS(transport stream) data was used and recorded to DEPROTO system. During retrieving, the CCD(charge coupled device), capturing device of DEPROTO, detects retrieved images and transmits signals of them to the FPGA of hardware channel decoder. Finally, the output data stream of the channel decoder was transferred to the MPEG decoding board for monitoring video signals. The experimental results showed the error corrected BER(bit error rate) of less than $10^{-9}$, from the raw BER of DEPROTO, about $10^{-3}$. With the developed hardware channel decoder, the real-time video demonstration was possible during the experiments. The operating clock of the FPGA was 60 MHz, of which speed was capable of decoding up to 120 mega channel bits per sec.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1330-1336
• /
• 2014

QoS techniques and transmitted in real-time communication with the advancement of technology a variety of applications and services are available these days, mobile devices bogeuphwa LTE technology to the development of multimedia services with high quality can be realized. In order to satisfy this condition simply with a router with an increased bandwidth expansion by considering the increase in the routing table of the network scalability problems included. Burst traffic data to be distributed according to the environment is to be centered. To do this, the destination -based routing method to transmit the current paper -based (Source routing) routing settings are required. In this paper, published by the IETF, IP switching system based on standardized protocol Label Switching Multi-Protocol Label Switching (MPLS) network by using the existing Best Effect is difficult to guarantee QoS for multimedia transmission in MPLS network environment using optimized QoS guarantees to transmit the multicast.

• The KIPS Transactions:PartB
• /
• v.12B no.7 s.103
• /
• pp.755-760
• /
• 2005

To transmit a video bit stream over low bandwith, such as mobile, channels, encoding algorithms for high bit rate like H.263+ are used. In transmitting video bit-streams, packet losses cause severe degradation in image quality. This paper proposes a new algorithm for the recovery of missing or erroneous motion vectors when H.263+ bit-stream is transmitted. Considering that the missing or erroneous motion vectors are closely related with those of neighboring blocks, this paper proposes a temporal-spatial error concealment algorithm. The proposed approach is that missing or erroneous Motion Vectors(MVs) are recovered by clustering the movements of neighboring blocks by their homogeneity. MVs of neighboring blocks we clustered according to ALA(Average Linkage Algorithm) clustering and a representative value for each cluster is determined to obtain the candidate MV set. By computing the distortion of the candidates, a MV with the minimum distortion is selected. Experimental results show that the proposed algorithm exhibits better performance in subjective and objective evaluation than existing methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.206-212
• /
• 2006

Many image and video compression algorithms work by splitting the input image into blocks and producing variable-length coded bits for each block data. If variable-length coded data are transmitted consecutively, then the resulting coder is highly sensitive to channel errors. Therefore, most image and video techniques for providing some protection to the stream against channel errors usually involve adding a controlled amount of redundancy back into the stream. Such redundancy might take the form of resynchronization markers, which enable the decoder to restart the decoding process from the known state, in the event of transmission errors. The Error Resilient Entropy Code (EREC) is a well known method which can regain synchronization without any redundant information to convert from variable-length code to fixed-length code. This paper proposes an enhancement to EREC, which greatly improves its transmission ability for the compressed image quality without any redundant bits in the event of errors. The simulation result shows that the both objective and subjective quality of transmitted image is enhanced compared with the existing EREC at the same BER(Bit Error Rate).

• Journal of Korea Spatial Information System Society
• /
• v.11 no.1
• /
• pp.63-70
• /
• 2009

3D GIS(Geographic Information System) processes, analyzes and presents various real-world 3D phenomena by building 3D spatial information of real-world terrain, facilities, etc., and working with visualization technique such as VR(Virtual Reality). It can be applied to such areas as urban management system, traffic information system, environment management system, disaster management system, ocean management system, etc,. In this paper, we propose video visualization technology based on 3D geographic information to provide effectively real-time information in 3D geographic information system and also present methods for establishing 3D building information data. The proposed video visualization system can provide real-time video information based on 3D geographic information by projecting real-time video stream from network video camera onto 3D geographic objects and applying texture-mapping of video frames onto terrain, facilities, etc.. In this paper, we developed sem i-automatic DBM(Digital Building Model) building technique using both aerial im age and LiDAR data for 3D Projective Texture Mapping. 3D geographic information system currently provide static visualization information and the proposed method can replace previous static visualization information with real video information. The proposed method can be used in location-based decision-making system by providing real-time visualization information, and moreover, it can be used to provide intelligent context-aware service based on geographic information.