• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.102-107
• /
• 2007

This paper proposes a H.264/AVC entropy decoder without embedded processor nor memory fabrication process. Many researches on H.264/AVC entropy decoders require ROM or RAM fabrication process, which is difficult to be implemented in general digital logic fabrication process. Furthermore, many researches require embedded processors for bitstream manipulation, which increases area and power consumption. This papers proposes hardwired H.264/AVC entropy decoder without embedded processor, which improves data processing speed and reduces power consumption. Furthermore, its CAVLC decoder optimizes lookup table and internal buffer without embedded memory, which reduces hardware size and can be implemented in general digital logic fabrication process without ROM or RAM fabrication process. Designed entropy decoder was embedded in H.264/AVC video decoder, and it was verified to operate correctly in the system. Synthesized in TSMC 90nm fabrication process, its maximum operation frequency is 125MHz. It supports QCIF, CIF, and QVGA image format. Under slight modification of nC register and other blocks, it also support VGA image format.

• Journal of Korean Elementary Science Education
• /
• v.28 no.3
• /
• pp.263-276
• /
• 2009

The purpose of this study was to analyze the elementary students' selection of representable value and confident method that appear in measuring activities by using a microgenetic method. The participants were seven elementary students in the fourth grade. They performed the same measuring activities six times for the study period. Data were collected by interview and observation with their activity recording papers and video tape transcription. Their activities were recorded and documented for the analysis. Results were as follows. First, in the time measuring activity, elementary students developed desirably as their measuring experience increased, for example they selected a representable value in use of a repeated measurement and used a various method in the domain of a time measurement and they showed an increase of a quantitative observation in the volume domain except in the length domain. Second, in a confident method of a representable value, though they must rely upon a repeated measurement, they only measure repeatedly in the time domain. Also in the time domain, it doesn't get accomplished a exact confidence of a representable value at a shortage of skill about a measurement. Accordingly this study will be implications for teachers to teach a handling abilities of measuring instruments to elementary students and to be promote understanding a nature of measurement.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.5
• /
• pp.563-572
• /
• 2006

Advantage that light transmission treatment way of most suitable through skin can investigate light directly in part ar there is difference in ability photoelectricity month by diverse complexion of horn character department which is branch or head of a family outside part of skin and treatment according to various patient can be inappropriate. By result that this research uses color information after search each color ingredient that ingredient of HIS and YIQ that use method, color information to use skin impedance way and color information through skin area ion and difference video to do fixed measuring by light investigation way by skin impedance corresponds to skin color in an experiment though is most universal result according to patient's skin model area detection each single person's skin model through videotex automatically create and because measuring, investigate skin color, energy, wave length, approximately, transmission time, model of most suitable that draw pulse delay and so on and want and special quality, and saved standard of disease treatment pulse modeling by skin impedance, and design and manufacture light investigation pulse modeling system of most suitable by skin subordinate, and constructed suitable treatment pulse database by skin color.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.3
• /
• pp.65-77
• /
• 2005

This paper investigates the failure mechanism of geosynthetic-reinforced segmental retaining walls with tiered configuration using reduced-scale model tests. The reduced scale model test set-up was established to simulate a 5 m high full-scale wall. The geometry and material properties used in the model test were determined based on the Similitude Laws. The wall failures in the model tests were successfully generated by their self weight without any surface loading and analyzed examining the digital video recordings. The failure mechanisms was examined with respect to the various offsets between the lower and upper teres and the reinforcement length. Based on the results the appropriateness of the current design guideline was discussed.

• Journal of the Korean Society of Safety
• /
• v.31 no.5
• /
• pp.133-140
• /
• 2016

Most small weir installed in Korea is concrete solidated weir. Fixed weir causes stagnant flow, which leads to deposit sediment just upstream of weir. As time goes on, it would induce reduction of water storage capacity and invoke the serious water quality issues. Therefore, there has been a growing interest in movable weir. Especially, the flexible rubber weir is easy to install and possible to operate in extreme environments. However, even though this type can be flatable, it is also not free from sediment deposition problem. Thus, to enhance the ability of releasing deposition the bypass pipe was constructed underneath it. In this study the performance of its ability was examined with hydraulic model test. This bypass pipe was designed with 3 different dimensions to connect between each bottom of upstream and downstream of a weir, such as Type A, B, and C. The efficiency of drainage of deposition upstream was studied under two water of upstream and sediment heights. In addition, the ability of sediment emission through the bypass pipe after the pipe was blocked by debris like soil, vegetation et al. was examined by video monitoring. From this study, it was suggested a dimensionless equation which show the relationship of variable parameters and amount of emission sediment through bypass pipe. And it was found that the most significant factors on efficiency of releasing were elbow angle and discharge, and the ability of emission when the pipe was blocked was most highly influenced in tilting length.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.61-67
• /
• 2017

Suspended sediment transport plays principal roles in morphological process of natural coastals. It is needed to understand the reason why interaction characteristics of solitary wave and suspended sediment. The present study shows that suspended sediment pickup derived on solitary wave celerity. The 2D prismatic open channel length is 12 m, width is 0.8 m, height is 0.75 m and slope is 1/6. Generation of solitary wave is used by rapidly opening the sluice gate. Bottom surface sediments are laid movable slope section by 0.03 m thickness and experimental sediments are used anathracite and jumoonjin sand. Techniques of suspended sediment pickup rate are designed equipment ASC(Absorptive Suspended sediment Collector). It could directly absorb 5 points suspended sediment by channel water depth. Solitary wave celerity is measued by ADV(Acoustic Doppler Velocimeter). Mounted two video cameras(Model No. : Sony, HDR-XR550) are used to image processing of suspended sediment concentration and turbidity. Suspended sediment pikcup rate(Einstein, 1950) is analyzed to nondimensionalization based on solitary wave celerity. The suspended sediment pickup rate is suggested that more effective plunging breaking type than spilling. The results indicates fundamental suspended sediment transport mechanism between solitary wave celerity and suspended sediment pickup based on laboratory experiments. Finally, the present study suggests that suspended sediment pickup rate by solitary wave is used only characteristics of sediment and solitary wave celerity.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.3011-3018
• /
• 2000

On ATM networks, ABR services are provided using the remained bandwidth after allocating CBR and VBR traffic. Realtime services such as transmitting audio or video data may be provided using CBR and VBR which have a constrained transmission delay, but in these cases, the communications bandwidth may be wasted. This paper proposes an efficient bandwidth allocation algorithm to transfer real-time data using ABR service. The proposed algorithm guarantees MCR and allocates bandwidth to each connection proportional to its MCR. The proposed algorithm divides the connections in two groups - a satisfied state group and a bottlenecked state group - and enhances bandwidth utilization by allowing the remained bandwidth after allocating the connections in the satisfied state to be allocated to the connections in the bottlenecked state. Our algorithm uses a Queue control function proposed by Ghani[5] to keep the Queue length within some boundary, which makes the transmission delay constant. We simulate and compare the performance of the proposed algorithm with that of the algorithms proposed by ATM Forum[1] and Kalampoukas[2].

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.215-224
• /
• 2011

There have been studying many researches to detect human body and to track one with increasing interest on human and computer interaction. In this paper, we propose the algorithm that automatically extracts joints, linked points of human body, using the ratio of human body under single camera and tracks object. The proposed method gets the difference images of the grayscale images and ones of the hue images between input image and background image. Then the proposed method composes the results, splits background and foreground, and extracts objects. Also we standardize the ratio of human body using face' length and the measurement of human body and automatically extract joints of the object using the ratio and the corner points of the silhouette of object. After then, we tract the joints' movement using block-matching algorithm. The proposed method is applied to test video to be acquired through a camera and the result shows that the proposed method automatically extracts joints and effectively tracks the detected joints.

• Journal of KIISE:Software and Applications
• /
• v.35 no.9
• /
• pp.538-546
• /
• 2008

It has limits that system administrator deals with many problems occurred in systems because computing environments are increasingly complex. It is issued that systems have an ability to recognize system's situations and adapt them by itself in order to resolve these limits. But it requires much experiences and knowledge to build the Self-Adaptive System. The difficulty that builds the Self-Adaptive System has been problems. This paper proposes a technique that generates automatically the codes of the Self-Adaptive System in order to make the system to be built more easily. This Self-Adaptive System resolves partially the problems about ineffectiveness of the exceeded usage of the system resource that was previous research's problem and incorrect operation that is occurred by external factors such as virus. In this paper, we applied the proposed approach to the file transfer module that is in the video conferencing system in order to evaluate it. We compared the length of the codes, the number of Classes that are created by the developers, and development time. We have confirmed this approach to have the effectiveness.

• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.197-205
• /
• 2000

This paper proposes and evaluates a scheme which enhances real-time performance on the Ethernet-based residential network where cable length is very short and most of traffic passes through a specific device. The scheme aims at enhancing deadline meet ratio of the real-time traffic, for example, video stream by means of applying the functionalities such as queue discrimination and early packet discard as well as maintaining network load properly. The design includes the description on hardware interfaces along with the software modules such as scheduler, device driver and connection manager. The simulation results via SMPL suggest that the proposed network can be used as a cost-effective residential network. We also measure the permissible bandwidth for non-real-time traffic without degrading the performance of real-time traffic.