• 전기의세계
• /
• v.26 no.5
• /
• pp.74-82
• /
• 1977

This study is to present a method for reductin of noise and vibration of home electric motors coupled to the mechanical load causing relatively big amplitude of vibration. The noise and vibration factors have been analysed in the divisions such as the pattern related to the armature reaction, the pattern related to the circulating current by induction and the other patterns those are affected by a dditive magnetic field and have an effect on mechanical constants. From the systematic mutual relations between the patterns and daping effects, it is possible to derive the fundamental measure for reduction of noise and vibration. Vibration measurements and analysis were carried out in accordance with the planned experimentation and thre object model was chosen randomly from the production line in a factory where home electric machines were mass-produced. Based on the above-mentioned fundamental measure, suppression effects on noise and vibration have been analysed according to the number of slots, the amount of rotor skew and the way the stator winding connection was series or parallel.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.911-914
• /
• 2003

The non-contact laser measurement system what can be used for the vibration analysis of structures is discussed. There are few systems using laser speckle interferometer for vibration analysis. One of these systems is the Electronic Speckle Pattern Interferometer (ESPI). With ESPI system, one can obtain the vibration mode shape qualitatively and the maximum vibration amplitude quantitatively of the structure at each resonance frequency. In this paper, the phase-shifting ESPI system with stroboscopic illumination for measuring vibration mode shapes is constructed and the operating software is programmed. The results are compared with that of commercial ESPI system.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.11
• /
• pp.739-746
• /
• 2015

Several damage counting methods can be applied for the fatigue issues of a ground vehicle system using strain data and acceleration data is partially used for a high cyclic loading case. For a vibration test, acceleration data is, however, more useful than strain one owing to the good nature of signal-to-random ratio at acceleration response. The test severity can be judged by the fatigue damage and the pseudo-damage from the acceleration response stated in ISO-16750-3 is one of sound solutions for the vibration test. The comparison of fatigue damages, derived from both acceleration and strain, are analyzed in this study to determine the best choice of fatigue damage over multi-spectral input pattern. Uniaxial excitation test was conducted for a notched simple specimen and response data, both acceleration and strain, are used for the comparison of fatigue damages.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.363-369
• /
• 2011

In this study, a direct pattern forming process on a plastic film using ultrasonic vibration energy is investigated. A tool horn containing micro-patterns is attached to an ultrasonic power supply, and is used to press a plastic film with ultrasonic vibration in order to replicate micro-patterns on the surface of the plastic film. To replicate micro-patterns with high accuracy, the tool horn should be designed to allow only the longitudinal vibration, not the transverse vibration. For this purpose, the design of a tool horn is investigated through finite element analysis, from which the resulting natural frequency of the tool horn can be adjusted in the range of the ultrasonic power supply. The analysis result is then reflected on the optimal design and fabrication of the tool horn. The validity of the developed tool horn is discussed through pattern-forming experiments using the ultrasonic vibration of the developed tool horn.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.377-383
• /
• 1996

Recently, a new technique called Electronic Speckle Pattern Inteferometry(ESPI) has been developed to overcome the drawbacks of existing holography. This technique enable real-time interference fringes to be displayed directly on TV monitor without recourse to any form of photographic processing. This research was carried out for the purpose of applying the vibration analysis method employing Electronic Speckle Pattern Interference technique to the vibration analysis of uniform rectangular cantilever plate, The natural vibration frequencies found by ESPI were in fair agreement with theoretical eigen frequencies acquired using theoretical formula G. B. Warburton proposed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.7
• /
• pp.605-613
• /
• 2013

This research proposes a vibration pattern algorithm to implement the haptic joystick to control a mobile robot at the remote site without watching the navigation environment. When the user cannot watch the navigation environment of the mobile robot, the user may rely on the haptic joystick solely to avoid obstacles and to guide the mobile robot to the target. To generate vibration patterns, there is a vibration motor at the bottom of the joystick which is held by the user to control the motion direction of the mobile robot remotely. When the mobile robot approaches to an obstacle, a pattern of vibration is generated by the motor, and by feeling the vibration pattern which is determined by the relative position of the mobile robot to the obstacle, the user can move the joystick to avoid the collision to the obstacle for the mobile robot. To generate the vibration patterns to convey the relative location of the obstacle near the mobile robot to the user, Fuzzy interferences have been utilized. To measure the distance and location of the obstacle near the mobile robot, ultrasonic sensors with the ring structure have been adopted and they are attached at the front and back sides of the mobile robot. The precise location of the obstacle is obtained by fusing the multiple data from ultrasonic sensors. Effectiveness of the proposed algorithm has been verified through the real experiments and the results are demonstrated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.413-418
• /
• 2013

As haptic devices become increasingly important in various product fields, it becomes essential to design effective vibration patterns for better tactile sensitivities. Despite this trend, standardization in the design of vibration patterns has not been well established, which causes developers to neglect the effects of haptics while programming or developing products. To provide better tactile sensitivity, the present study introduces a vibration pattern design system and proposes guidelines for designing vibration patterns. This system consists of two modules: (1) a graphical pattern design and evaluation program and (2) a vibro-tactile display device for prototyping the designed vibration patterns.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.85-90
• /
• 1996

In the word, there is varied types of vibration, and these affect the mechanical industry. In this paper is plates with two parallel sides fixed. Electronic speckle pattern interferometry (ESPI) is one of the optical nondestructive testing technique. By using the ESPI, vibration modes for excitation point, a/b(ratio of longuitudinal and lateral length), and kind of specimen are measured and compared qualitatively with theoritical analysis that Warburton proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.2
• /
• pp.564-574
• /
• 1996

This paper describes as Electronic Speckle Pattern Interferometry system which has been designed for measuring vibration patterns and quantitative measurement of vibration amplitude fields by using the time average method on a object. Visbility of fringe patterns is more improved by using the phase stepping and frame average method to reduce speckle and electric noise. And a bias vibration is introduced into the reference beam to shift the $\frac{2}{0}$ fringes so that fringe shift algorithms can be used to determine vibration amplitude. The experimental results are compared to those of the FFT analyzer and the FEM model analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.12
• /
• pp.2047-2054
• /
• 1997

This paper describes a measuring method of vibration mode shapes by the Electronic Shearography. This method called the speckle interferometer has many merits in practical use, such as low sensitivity to environmental noise, low limit of coherent-length and simple optical configuration. In this study, we developed Michelson-type shearing interferometer provided with a phase stepping mirror and with a bias modulation mirror to quantify the vibration gradient fields. Results of application to a simple cantilever plate show that the vibration amplitude fields obtained are in good agreement with those of the electronic speckle pattern interferometry (ESPI).