• 수산해양기술연구
• /
• 제52권2호
• /
• pp.162-168
• /
• 2016

This study attempted to help determine Korean fishery policies by proposing improvement plans after examining the current regulations, fishing vessels, fishing gear and fishing methods of the middle sized trawl fishery in the East Sea for targeting only squid. In general, the size, engine horse power, and net length of the middle sized trawlers are between 50 and 60 GT, 1,200 and 1,600 PS, and approximately 165 m with four seamed trawl nets, respectively. While a jigging vessel attracted squids using lights, the trawler approached a jigging vessel. The trawler let the jigging vessel know its decision for fishing, and then jigging vessel rolled up jigs. The net of the trawler was casted at 45 degrees between the bow and the stern of the jigging vessel. Once the trawler towed close to the stern of the jigging vessel upon its passing of the jigging vessel, the bow of the trawler turned 45 degrees left again. Then, squid aggregations were entered into the net. When the cod end was passed a light vessel, the trawler hoisted the net up to the otter board. Then the trawler turned 180 degrees. It repeated three to five times of fishing operations as the previous method. We recommend that the regulations allow nineteen side trawlers to catch like stern trawler, as well as the cooperative trawler and jigging vessel operations.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.86-91
• /
• 2013

It is important to understand the fuel injection characteristics, particularly the atomization, penetration, and breakup, for reducing the emissions in Diesel engines because those characteristics are related to the formation of the emissions. 3-dimensional CFD code can provide a fundamental understanding of those characteristics. In this study, two different breakup models (the Reitz-Diwakar model and the Kelvin-Helmholts Rayleigh Taylor model) were validated with the experimental data in a constant volume vessel. Then, the effect of the breakup model on the characteristics of the engine combustion and emission was studied.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.648-655
• /
• 2005

The resilient mounts of a diesel engine installed onboard a ship should be designed for both static and dynamic loads. If possible, the resonance frequencies of the six rigid body modes of the installation and the flexible modes of the engine support structure should not lie within the engine operation range. In this paper a design criterion is proposed to evaluate an isolation system which involves the summation of dynamic forces transmitted through the resilient mounts and elastic potential energy index stored in the mounts. A case study is also presented in which a diesel engine generator, which had an elastic foundation and was mounted in a 5500 TEU container vessel, was studied both theoretically and experimentally. The theoretical analysis of the test model was performed by using a single mass 6 degree of freedom system. Actual measurements of mechanical vibration of the Engine and its foundation onboard were carried out, which showed the importance of including the flexibility of the engine support structure in the mode

• 한국소음진동공학회논문집
• /
• 제16권4호
• /
• pp.329-338
• /
• 2006

The resilient mounts of a diesel engine installed onboard a ship should be designed for both static and dynamic loads. If possible, the resonance frequencies of the six rigid body modes of the installation and the flexible modes of the engine support structure should not lie within the engine operation range. In this paper a design criterion is proposed to evaluate an isolation system which involves the summation of dynamic forces transmitted through the resilient mounts and elastic potential energy index stored in the mounts. A case study is also presented in which a diesel engine generator, which had an elastic foundation and was mounted in a 5500 TEU container vessel, was studied both theoretically and experimentally. The theoretical analysis of the test model was performed by using a single mass 6 degree of freedom system. Actual measurements of mechanical vibration of the engine and its foundation onboard were carried out, which showed the importance of including the flexibility of the engine support structure in the mode.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권8호
• /
• pp.1152-1161
• /
• 2009

신조선 선박에서 시운전 중 주 추진 시스템의 동력을 측정하는 방법은 스트레인 게이지를 이용하여 축의 변형률로부터 얻어지는 직접적인 방법과 기계적인 또는 전기적인 픽업을 이용하여 계측한 실린더연소압력으로부터 환산된 면적에 의한 간접적인 방법으로 구분할 수 있다. 이러한 동력은 장주기로 선박의 여러 가지 해상 운동에 의해서 그리고 단주기로는 축계의 비틀림, 축계 배치 및 횡진동의 영향에 의해서 변동한다. 본 논문에서는 축동력측정과 평가를 위하여 통계적인 해석법을 소개하고 있고, 저속2행정디젤엔진과 감속기를 포함 중속 4행정 디젤엔진 모델에 의해서 이들이 확인되고 있다.

• 수산해양기술연구
• /
• 제57권3호
• /
• pp.256-263
• /
• 2021

In this study, blending oils of diesel oil and butanol were used as fuel oil for diesel engine to measure combustion pressure, fuel consumption, air ratio and exhaust gas emission due to various operating conditions such as engine revolution and torque. Using these data, the results of analyzing the engine performance, combustion characteristics and exhaust emission characteristics such as NOx (nitrogen oxides), CO₂ (carbon dioxide), CO (carbon monoxide) and soot were as follows. The fuel conversion efficiency at each load was highest when driven in the engine revolution determined by a fixed pitch propeller law. Except 30% butanol blending oil, fuel conversion efficiency of the other fuel oils increased as the load increased. Compared to diesel oil, using 10% and 20% butanol blending oil as fuel oil was advantageous in terms of thermal efficiency, but it did not have a significant impact on the reduction of exhaust gas emissions. On the other hand, future research is needed on the results of the 20% butanol blending oil showing lower or similar levels of smoke concentration and carbon monoxide emission rate other than those types of diesel oil.

• 한국수산과학회지
• /
• 제10권4호
• /
• pp.227-235
• /
• 1977

1976년 8월 16일 (북위 $34^{\circ}27'30'$ 동경 $128^{\circ}23'15'$)과 1977넌 7월 28일(북위 $34^{\circ}47'$ 동경 $128^{\circ}53'$)에 관악산호의 선박소음이 r.p.m에 따라 항해시와 정선시 (기관의 공회전)의 소음압이 해중에 분포하는 것을 조사 연구한 결과를 요약하면 다음과 같다. 1. 기관의 r.p.m.과 음압관계 r.p.m.과 음압의 증가비는 100 : 1이었으며 r.p.m. 600에서 104dB로 peak를 이루었다. 2. 외현주변의 해중해압분포 A. 정선시의 기관소음압 100,102,103,104,104 dB일때 관측점 No.1에서 69,70,72,74,75 dB No.3은 No. 1에 비해 $2\~3\;dB$ 증가해 peak를 이루었고 No.5는 No.3에 비해 $10\~15\;dB$씩 감쇠되었다. 기관소음압이 최대 일때 관측점 $No.1\~No.5$에서의 음압이 투과된 백분율은 약 $78,79,80,73,70\%$였다. B. 항해시의 선박수중소음압 정선시와 같은 기관회전 조건하에서 No.2에서 69,72,75,77,78 dB로 peak를 이고 No. 1보다 $2\~3\;dB$씩 감쇠되었다. 기관 최고소음압에 대한 $No1.\~No.5$에서의 음압투과 백분율은 약 $78,81,79,77,71\%$ 였다. 3. 항해시와 정선시의 외현해중 음압 peak점에서의 음압을 비교하면 항해시가 1 dB 높았다. 4. 선박이 멀어질 때 0 m(관측점 통과시)에서 67 dB, 1,400 m에서 56 dB였다. 5. 선박이 가까워질 때 거리 0 m에서 72 dB, 1,400 m에서 57 dB로서 멀어 질때와 비교하면 0m에서 5 dB, 600 m에서 2 pB씩 증가한 도플러 효과가 일어남을 알 수 있다. 6. r.p.m.을 600으로 하여놓고 스크류를 돌리지 않고 기관만 공회전 시킬 때 수평거리 20 m인 곳의 No.7에서 수심 10 m마다 50 m까지의 음압은 68,75,62,59,55,51 dB였다.

• 수산경영론집
• /
• 제36권3호
• /
• pp.89-117
• /
• 2005

Currently, the tax - exempted vessel fuel is provided for commercial fishing in order to increase the competitive power of fishery production thorough the National Federation of Fisheries Cooperatives. The National Federation of Fisheries Cooperatives should predict the exact amount of fuel consumption for fishing every year to request the fuel from the government. Unfortunately, there is no sophisticated model to predict the tax - exempted vessel fuel consumption. In 2003, the consumption of the tax- exempted vessel fuel was only $25.1\%$ of the estimation amount by the National Federation of Fisheries Cooperatives. This causes an inefficiency in the petroleum management. Moreover, we need some data such as the annual average fishing hours, fishing days and fishing behavior to adopt a new policy regarding fishing. Up to now, the data have been obtained by survey with response in the fishery field. In the most case, we have a small number of data because we spend so much time and money consuming for collecting fishing data. As a result, the level of confidence of the data is associated with the sample size and normally low. In order to achieve more accurate data, we need to develope an efficient method for collecting fishing data. In this research, we proposed a new method to predict the tax- exempted vessel fuel consumption more exactly. The prediction results from the proposed method has been compared with the results from the current method. According to the results in this research, the method proposed here produced much better accuracy than the current method. In addition, we also proposed in the paper for collecting fishing data of the annual average fishing hours using the tax - exempted vessel fuel consumption and the gasoline consumption of vessel engine. The fishing data obtained by using the method proposed in this research could be much more efficient and accurate because it doesn't need to estimate from survey sample data.

• 수산해양기술연구
• /
• 제48권1호
• /
• pp.91-98
• /
• 2012

This study is aimed to utilize a basic data for setting up an allowable air noise with IMO standard in accommodation and working areas of 24m longer fishing vessels. The air noise in accommodation and working areas of 300 tons class squid-jigger were evaluated and the levels were compared to the allowable levels of IMO. The results indicated that the maximum range of noise levels was estimated to be between 54.8dB (A) and 83.2dB, and the correlation between the distance from the main engine to measuring point and the maximum noise level of each point was shown to be y=-13.8log (r)+92.91 ($r^2=0.821$). In addition, except the case of making an accommodation area near to the engine room in 24m longer jigging vessels, it was evaluated that the accommodation noise regulation of 1,600 tons international voyage vessels with 60dB (A) or an improved noise level with 65dB (A) could be properly applied.

• 수산해양교육연구
• /
• 제2권1호
• /
• pp.50-56
• /
• 1989

The authors investigated the present status of employment of graduates from ship-boarding departments, Department of Fishing Technology, of Marine Engineering in National Fisheries University of Pusan from 1974 to 1988 by communication of every kind. The prospects of the graduates were studied on the bases of the present status of employment The results obtained can be shown as follows ; 1. In Department of Fishing Technology, the number of graduates who are engaged in major field is 562 (81%) among total members of graduates 693, and fishing vessel officer and fisheries company officer is 308(55%), 215(38%) respectively among the above members of employment in major field. 2. In Department of Marine Engineering, the number of graduates who are engaged in major field is 468(74%) among total members of graduates, 634, and engine and machinery field officer, merchant vessel officer is 331(71%), 89(19%) among above members of employment in major field respectively. 3. Developement of deep sea fisheries and industry of engine and machinery seems to graduates easy to get their jobs in major field.