• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.87-92
• /
• 2003

Generally, in jack up rig design for harsh environment, its leg height is a major factor for achieving a sufficient serviceability & operability in terms of the worst environment and the workable depth. Due to difficulties in constructing such a high-slender leg, inaccessibility of yard fabrication equipment, etc. the construction of Jack up rig fur harsh deep sea has not been common. Method using heavy crawler crane, fabrication tower or extension by the floating crane vessel is still conventional construction but, considering high cost fur mobilizing heavy lift vessel (HLV) or additional marine work for implementing preload / full height test at sea, the ground-base construction is much advantageous. Air skidding method (ASM hereafter) is ground-based construction methodology, newly developed due to such requests. ASM could also be extended to similar engineering fields. This paper presents the operating sequence, design parameters and procedure which were verified through successful operation at the end of May 2002.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.2
• /
• pp.135-142
• /
• 2015

The float over method is the most preferred method for installing heavy topside onto a jacket platform. A very complex platform with multiple jacket structures on a specific field requires multiple installation procedures. This study validated the installation of two topsides using a single installation barge to reduce the operation and installation cost. The hydrodynamic properties of the installation barge during the installation of two topsides were calculated. The tension and fender forces during docking were investigated to show the validity of the proposed dual topside installation method. In conclusion, the operational safety of the proposed procedure was validated through the calculation of the motion of the installation vessel and loads on the jacket legs.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1031-1037
• /
• 2021

The frequency of marine accidents of vessels in Korea is steadily increasing and it is concentrated on small vessels with less than 10 tons of gross tonnage. Therefore, preventing capsizing accidents in small vessels is important to reduce the cost in terms of human and property damage due to such accidents. However, research on the seakeeping performance of small vessels has been insufficient, and there are no domestic and international regulations on seakeeping performance. Therefore, in this study, capsizing accidents caused by poor loading conditions were investigated by examining the adjudications of the small vessels in which the capsizing accidents occurred. Hydrostatic calculations and seakeeping performance analysis were performed for a representative vessel. A vessel generally performs a six-degree-of-freedom motion during operation. In this study, the response amplitude operator and response spectrum of a representative vessel were calculated to determine the roll motion. Moreover, a short-term statistical analysis of the vessel according to the loading conditions was performed for the wave stationary status for 3 h. From the results, it was estimated that, when the loading condition of a small vessel is poor, its roll motion increases, greatly reducing its stability.

• Ocean and Polar Research
• /
• v.37 no.2
• /
• pp.119-125
• /
• 2015

This paper focuses on the efficient arrangement plan of buoyancy modules, which plan is used to secure the safe operation and structural stability of a marine riser. The marine riser is connected between a vessel and seabed devices. The movement of the vessel and the seabed devices are affected by the motion of the riser. The riser of a deep-seabed integrated mining system exerts a strong influence on the healthy transfer of minerals. So, buoyancy modules must be equipped to compensate for the problem which is the structure stability and the dynamic motion. Installation locations and quantities of the buoyancy modules are determined by real sea experiments. But this is not easy to do because in real sea experimental conditions the cost is expensive as well as being, time-consuming and dangerous. Therefore, the locations and quantities should be determined by numerical simulation. This method is called simulation-based design. The dynamic analysis models of the riser and the buoyancy modules are built into the commercial software of DAFUL.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.3
• /
• pp.258-264
• /
• 2020

This study aimed to analyze the economic feasibility of the reduction of working safety accidents in stow net fishery through the prevention education to fishing crews. The benefit was evaluated by estimating insurance payment amount that was reduced through prevention education. The decreasing rate of working safety accidents was presumed to follow the experience in Japan. The cost was assumed as the cost of textbook development. Results indicated that IRR was estimated to be 79.9% in case of scenario assuming no additional operating costs while IRR was 56.3% in case of scenario assuming 10% additional operating costs. In addition, the economic feasibility would be secured when annual operating costs increased to 274 million won according to the result of sensitivity analysis.

• Ocean and Polar Research
• /
• v.21 no.2
• /
• pp.117-126
• /
• 1999

To meet increasing needs for environmentally sustainable management of coastal area, there has been compelling pressure to establish a cost-effective and long-term coastal water quality (CWQ) monitoring system. A remote CWQ monitoring system, STAMP, has been developed and is in operation along the route between Kyema harbor and Anma Island in the southwestern coastal area of Korea. STAMP uses a PCS phone as a telemetry unit to transmit acquired data for monitoring general water quality parameters, and a routinely operating coastal passenger ship or car ferry. STAMP has various merits of low-cost operations; long-term monitoring with secure instrumentation; and stable real-time telemetry of acquired data with-out the loss and noise. It is expected that the system will serve as a very useful tool in the CWQ managing programs of Korea taking the advantage of many coastal passenger ships in various routes including the ships departing from the coastal industrial cities. The acquired data compiled on suspended surface sediment concentrations (SSSC) will be also valuably helpful in understanding the sediment budget across the routes of the vessel.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.1
• /
• pp.49-58
• /
• 2014

Variability factors of transship cargo in the container transportation market analysis short term factors. In the past, studies on the factor of variability in container cargo volume have focused on long term volume forecast and increase in investment and competitiveness from strategic perspectives. Unlike previous studies, this paper analyzes factors of variability in transshipment volume rapidly varying in short term and seeks measures. Since it was identified that transshipment volume depends on vessel operation cost and port volume in long term but effectively on special strategies launched by port authorities in short term, the port authority experienced rapid drop in volume should continue to observe strategies of competition ports and to make use of strategies seeking appropriate countermeasures.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.1
• /
• pp.14-19
• /
• 2017

Fuel oil consumption cost varies depending on every ship operation and this roughly amounts to 70 % of shipping companies' total revenue. As such, efforts towards improved fuel economy are being pursued. An annual 1 % reduction in fuel consumption is perceived to result in saving tens million US dollars on the global fleet operation. One approach is the application of power take-off configurations which are seen to increase fuel oil economy and are suitable for power generation. In this study, the dynamic properties of a shaft generator coupled on a 10S90ME main engine of an 18 600 TEU container vessel is presented. The vibratory torque and angular velocity variation was examined through theoretical analysis and actual vibration measurement. The result of the study suggests a review on existing classification rules for generator design and the lowering of vibratory torque and angular velocity variation guideline.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.1
• /
• pp.308-318
• /
• 2015

In order to improve the competitiveness of Korean large purse seine fishery, the purpose of this study is to find out the problems and present the improvement of the production structure of Korean large purse seine fishery by comparing to the production structure of Norwegian purse seine fishery. Norwegian purse seine fishery has been operating labor and energy-saving systems through a single wire operation and avoiding fishing competition through the introduction of IVQ system with different types of fishing vessel and obtaining benefits from Leading fishery management integrated with fish pumps and cooling water systems. In contrast, our country has a large purse seine fishery issues such as high cost and low efficiency of production structures, the volatility of mackerel resources, the lack of leading fishery management after catching fishes, the reduction of fishing ground in accordance with the North East Asia EEZ system. To solve these problems, initiatives to improve the structure of our large purse seine fishery are as follows: First, Implementing the promotion of the effective immature fishes management and establishing Korea-China-Japan resource management system. Second, the promotion of reduction of fleet size, the review of possible single fishing operation, leading out to strengthen its competitiveness by switching to energy-efficient production systems through enhanced efforts at fisheries catches steps. Third, it is necessary to realize corporate through the diversification of business areas and the large-scale commercialization of production structure.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.127-132
• /
• 2004

Most q the domestic container terminals are inferior to throughput q container. The reason why they have the difference between the handling capacity q planed quay and its real. By putting into quay handling equipment, the productivity of quay can be improved, waiting rate q the ship can be lowed. This paper suggests more resonable terminal construction, throughout comparing with previous construction way, improved handling capacity and the economical efficiency of equipment costs, labor costs, construction costs, operation costs on change of terminal size by adding the equipment.