DOI QR코드

DOI QR Code

Arrangement Plan of Buoyancy Modules for the Stable Operation of the Flexible Riser in a Deep-Seabed Mining System

심해저 채광 시스템에서 유연관의 안정적인 운용을 위한 부력재 배치 설계

  • Oh, Jae-Won (Department of Mechanical Engineering, College of Engineering, Hanyang University) ;
  • Min, Cheon-Hong (Korea Research Institute of Ships & Ocean Engineering, KIOST) ;
  • Lee, Chang-Ho (Korea Research Institute of Ships & Ocean Engineering, KIOST) ;
  • Hong, Sup (Korea Research Institute of Ships & Ocean Engineering, KIOST) ;
  • Bae, Dae-Sung (Department of Mechanical Engineering, College of Engineering, Hanyang University) ;
  • Lim, Jun-Hyun (Department of Mechanical Engineering, College of Engineering, Hanyang University) ;
  • Kim, Hyung-Woo (Korea Research Institute of Ships & Ocean Engineering, KIOST)
  • 오재원 (한양대학교 공과대학 기계공학과) ;
  • 민천홍 (한국해양과학기술원 부설 선박해양플랜트연구소) ;
  • 이창호 (한국해양과학기술원 부설 선박해양플랜트연구소) ;
  • 홍섭 (한국해양과학기술원 부설 선박해양플랜트연구소) ;
  • 배대성 (한양대학교 공과대학 기계공학과) ;
  • 임준현 (한양대학교 공과대학 기계공학과) ;
  • 김형우 (한국해양과학기술원 부설 선박해양플랜트연구소)
  • Received : 2014.08.27
  • Accepted : 2015.02.09
  • Published : 2015.06.30

Abstract

This paper focuses on the efficient arrangement plan of buoyancy modules, which plan is used to secure the safe operation and structural stability of a marine riser. The marine riser is connected between a vessel and seabed devices. The movement of the vessel and the seabed devices are affected by the motion of the riser. The riser of a deep-seabed integrated mining system exerts a strong influence on the healthy transfer of minerals. So, buoyancy modules must be equipped to compensate for the problem which is the structure stability and the dynamic motion. Installation locations and quantities of the buoyancy modules are determined by real sea experiments. But this is not easy to do because in real sea experimental conditions the cost is expensive as well as being, time-consuming and dangerous. Therefore, the locations and quantities should be determined by numerical simulation. This method is called simulation-based design. The dynamic analysis models of the riser and the buoyancy modules are built into the commercial software of DAFUL.

Keywords

References

  1. Brink AW, Chung JS (1981) Automatic position control of a 300,000-ton ship ocean mining system. In: Offshore technology conference, Houston, 1 December 1981
  2. Chung JS (1996) Deep-ocean mining: technologies for manganese nodules and crusts. Int J Offshore Polar Eng 6(4):244-254
  3. Chung JS (1998) An articulated pipe-miner system with thrust control for deep-ocean crust mining. Mar Georesour Geotec 16:253-271 https://doi.org/10.1080/10641199809379971
  4. Deepak CR, Ramji S, Ramesh NR, Babu SM, Raju A, Shajahan MA, Atmanand MA (2007) Development and tests of underwater mining systems for long term operations using flexible riser concept. In: 7th ISOPE ocean mining symposium, Lisbon, Portugal, 1-6 July 2007
  5. Glasby GP (2002) Deep seabed mining: past failures and future prospects. Mar Georesour Geotec 20:161-176 https://doi.org/10.1080/03608860290051859
  6. Halil D (2012) Riser concepts for deep waters. Norwegian University of Science and Technology, 5 p
  7. Handschuh R, Grebe H, Panthel J, Schulte E, Wenzlawski B, Schwarz W, Atmanand MA, Jeyamani R, Shajahan M, Deepak C, Ravindran M (2001) Innovative deep ocean mining concept based on flexible riser and selfpropelled mining machines. In: 4th ISOPE ocean mining symposium, Szczecin, Poland, 23-27 September 2001
  8. Hong S, Kim K (1999) Proposed technologies for mining deep-seabed polymetallic nodules: Chap 12 research and development of deep seabed mining technologies for polymetallic nodules in Korea. In: International seabed authority's workshop, Kingston, Jamaica, 3-6 August 1999
  9. Liu F, Yang N (1999) Proposed technologies for mining deep-seabed polymetallic nodules: Chap 9 Environmentally Friendly Deep Seabed Mining System. In: International seabed authority's workshop, Kingston, Jamaica, 3-6 August 1999
  10. Morgan CL, Odunton NA, Jones AT (1999) Synthesis of environmental impacts of deep seabed mining. Mar Georesour Geotec 17:307-356 https://doi.org/10.1080/106411999273666
  11. Sharma R (2011) Deep-sea mining: economic, technical, technological, and environmental considerations for sustainable development. Mar Technol Soc J 45:28-41 https://doi.org/10.4031/MTSJ.45.5.2
  12. Valsangkar AB (2003) Deep-sea polymetallic nodule mining: Challenges ahead for technologists and environmentalists. Mar Georesour Geotec 21:81-91 https://doi.org/10.1080/716100481
  13. Virtual Motion Inc. (2012) DAFUL 4.2 User's Manual
  14. Virtual Motion Inc. (2012) DAFUL 4.2 Verification Manual

Cited by

  1. A Study on the Simulation-based Design for Optimum Arrangement of Buoyancy Modules in Marine Riser System vol.30, pp.1, 2016, https://doi.org/10.5574/KSOE.2016.30.1.010
  2. A study on the basic design of bypass valve using CAE technology vol.40, pp.7, 2016, https://doi.org/10.5916/jkosme.2016.40.7.663