• 한국재난정보학회 논문집
• /
• 제17권1호
• /
• pp.39-52
• /
• 2021

연구목적: 최근 시설물 점검 및 진단에 있어 활용되는 첨단장비들이 증가하여 첨단장비의 검·인증제도의 필요성이 대두되고 있다. 본 연구는 시설물 점검 및 진단에 활용되는 터널스캐너의 성능검증 방법론을 제시하는 것을 목적으로 한다. 연구방법: 시설물 점검 및 진단에 활용되는 첨단장비의 성능검증 사례를 조사하고 전문가 자문회의를 통해 터널스캐너 성능검증 방법론을 제시하였다. 연구결과: 본 연구에서 제안하는 터널스캐너 성능검증 방법론은 1차 평가와 2차 평가로 구성된다. 1차 평가지표는 최소요구성능을 기준으로 구성되고, 2차 평가지표는 터널스캐너의 품질에 관여된 지표들로 구성된다. 결론: 본 연구에서 제시한 터널스캐너의 성능검증 방법론은 장비 사용자에게 공인된 성능 카탈로그를 제공할 수 있으며, 장비 개발자는 장비의 공인된 검증을 받을 수 있어 부실한 유지관리를 예방할 수 있을 것으로 기대된다.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.813-820
• /
• 2012

This paper presents the development of a software supported acquisition system for metrological verification and testing of the equipment for monitoring and analysis of the basic electrical power quality parameters. The described procedure consists of two functionally connected segments. The first segment involves generation of the reference three-phase voltage signals, including the possibility of simulation of the various power quality disturbances, typical for electrical power distribution networks. The second part of this procedure includes the real-time recording of power quality disturbances in three-phase distribution networks. The procedure is functionally supported by the virtual instrumentation concept, including a software application developed in LabVIEW environment and data acquisition boards NI 6713 and NI 9215A. The software support of this system performs graphical presentation of the previously generated and recorded signal waveforms. A number of the control functions and buttons, implemented on the virtual instrument front panels, are provided to adjust the basic signal acquisition, generation and recording parameters.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.745-750
• /
• 2009

In Korea, since the implementation of the GMO Law, the intrest of biosafety level 3(BL3) lab. is increasing. In this study, using CONTAM which is applying multizone modelling, the multizone simulation for design verification of BL3 lab. was performed. In BL3 lab., because required air change rate is greater than general estimated air-conditioning load and it is difficult to maintain room pressure difference efficiently, to maintain pressure difference between laboratory rooms is important through sealing condition of doors and proper airflow control of laboratory rooms. In this study, about BL3 lab.(M. tuberculosis research lab.), the multizone simulation for four kind of biohazard scenarios was performed in the case of unexpected spread of contaminants in the laboratory room, anteroom, corridor and inside of BSC. Multizone simulation results show that these approach methods are used as a tool for the design and verification of BL3 lab.

• 설비공학논문집
• /
• 제21권12호
• /
• pp.671-677
• /
• 2009

In Korea, since the implementation of the LMO Law, the interest of biosafety level 3(BL3) lab. is increasing. In this study, using CONTAM which is applying multizone modelling, the multizone simulation for design verification of BL3 lab. is performed. In BL3 lab., because required air change rate is greater than general estimated air-conditioning load and it is difficult to maintain room pressure difference efficiently, to maintain pressure difference between laboratory rooms is important through sealing condition of doors and proper airflow control of laboratory rooms. In this study, about BL3 lab,(M. tuberculosis research lab.), the multizone simulation for four kind of biohazard scenarios is carried out in the case of unexpected spread of contaminants in the laboratory room, anteroom, corridor and inside of BSC. Multizone simulation results show that these approach methods are used as a tool for the design and verification of BL3 lab.

• 제어로봇시스템학회논문지
• /
• 제10권10호
• /
• pp.956-960
• /
• 2004

The Vehicle Dynamic Simulator(VDS) is a key equipment of the performance verification of attitude control subsystem and it simulates the real dynamic environment that spacecraft undergoes during mission operation. All the software models and hardware interfaces necessary for the closed-loop simulation of the spacecraft dynamics are implemented. Using VDS, KOMPAT-2 attitude control logic functions and performance was verified. In this paper, the hardware and software configurations of KOMPSAT-2 VDS was described briefly and the information flow and exchanges between software models and actual hardwares during close loop simulation was described in the systematic point of view.

• 드라이브 ㆍ 컨트롤
• /
• 제14권3호
• /
• pp.50-57
• /
• 2017

Recently, methods of verification for electro-hydraulic servo controllers are various and the required number of testing controllers is continuously increasing in some specific systems. In this study, a PCB-based electronic simulator of hydraulic actuators is designed and developed to simplify test set-up for controllers and to facilitate alteration for characteristics of the simulator. Several features to reduce required time and manpower for verifying controllers are described. Especially, the simulator is considerably efficient to examine some controllers for different hydraulic actuators in a test. Response characteristics of the simulator are compared with those of real actuators to demonstrate validity of this method. Results reveal utilizing the designed simulator for inspecting controllers is equally effective as using hydraulic actuators.

• 한국정밀공학회지
• /
• 제23권12호
• /
• pp.80-87
• /
• 2006

Seals are usually made from elastomer, a kind of rubber, and it has the non-linearity and hyper-elasticity. U-type seals are used to prevent the leakage of internal fluid sealed in hydraulic actuator because they have more excellent performance than O-rings or rectangular seals. As a core part of hydraulic actuator, U-type seal gives much effect on performance and reliability of actuator. This study considers an NBR U-type seal under high pressure of a hydraulic actuator, and provides its deformation, stress-strain characteristic and contact force using the non-linear finite element analysis. Analysis results are compared with the experimental ones performed by the self-developed testing equipment. Verification result shows that this study presents a good application process for the effective design of U-type seals under high operation pressure.

• 한국전자통신학회논문지
• /
• 제15권3호
• /
• pp.389-396
• /
• 2020

좋은 품질의 제품을 얻기 위해서는 제품 자체에 대한 품질 적합성 검사 이전에 생산 및 시험 관련 설비에 대한 적절한 검증이 반드시 선행되어야 한다. 다양한 생산 및 시험 관련 설비 중에서도 ATE는 오늘날 자동차산업, 항공·우주산업, 반도체산업과 같은 민간분야 뿐만 아니라, 방위산업의 군수품 생산 및 성능시험에도 활발히 사용되고 있다. 본 논문은 다양한 방법을 활용하여 군용 FM 무전기 세트의 자동시험장비 인 ATS에 대해 체계적으로 설계 적합성 검증을 실시 한 결과를 다루고 있으며, 군수품 ATE에 대한 설계 적합성 검증 절차가 명문화 되어있지 않은 현 시점에 좋은 참고자료가 될 것으로 기대된다.

• 디지털산업정보학회논문지
• /
• 제7권3호
• /
• pp.97-105
• /
• 2011

With the advancement of network, privacy information as well as confidential information that belongs to government and company are exposed to security incident like spreading viruses or DDoS attack. To prevent these security incident and protect information that belongs to government and company, Security system has developed such as antivirus, firewall, IPS, VPN, and other network security system. Network security systems should be selected based on purpose, usage and cost. Verification for network security product's basic features performed in a variety of ways at home and abroad, but consumers who buy these network security product, just rely on the information presented at companies. Therefore, common user doing self performance evaluation for perform Verification before buying network security product but these verification depends on inaccurate data which based on some user's criteria. On this paper, we designing methodology of network security system performance evaluation focused on Korean using other cases of performance evaluation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.123-132
• /
• 2014

The maritime sector is advancing with dedicated endeavor to reduce greenhouse gas in addressing issues with regards to global warming. Since 01 January 2013, the International Maritime Organization (IMO) regulation mandatory requirement for Energy Efficiency Design Index (EEDI) has been in place and should be satisfied by newly-built ships of more than 400 gross tonnage and the Ship Energy Efficiency Management Plan (SEEMP) for all ships type. Therefore, compliance to this necessitates planning during the design stage whereas verification can be carried-out through an acceptable method during sea trial. The MEPC-approved 2013 guidance, ISO 15016 and ISO 19019 on EEDI serves the purpose for calculation and verification of attained EEDI value. Individual ships EEDI value should be lower than the required value set by these regulations. The key factors for EEDI verification are power and speed assessment and their synchronization. The shaft power can be measured by telemeter system using strain gage during sea trial. However, calibration of shaft power onboard condition is complicated. Hence, it relies only on proficient technology that operates within the permitted ISO allowance. On the other hand, the ship speed can be measured and calibrated by differential ground positioning system (DGPS). An actual test on a newly-built vessel was carried out to assess the correlation of power and speed. The Energy-efficiency Design Index or Operational Indicator Monitoring System (EDiMS) software developed by the Dynamics Laboratory-Mokpo Maritime University (DL-MMU) and Green Marine Equipment RIS Center (GMERC) of Mokpo Maritime University was utilized for this investigation. In addition, the software can continuously monitor air emission and is a useful tool for inventory and ship energy management plan. This paper introduces the synchronization and identification method between shaft power and ship speed for EEDI verification in accordance with the ISO guidance.