• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.36-45
• /
• 2022

The aim of this study was to verify an E-driving system of a 44 kW-class electric tractor using agricultural workload data. Workload data were acquired during field test (plow tillage, rotary tillage, loader operation, field driving, asphalt driving) using a conventional tractor with a load measurement system. These workload data were converted to data of a 44 kW-class tractor based on the load factor of the engine. These data were used to verify the design of the E-driving system of an electric tractor. High-load operations such as plow tillage, rotary tillage, and loader operation could be performed at stage L and stage M. High-speed operation (asphalt driving) could be effectively performed at stage H using a rated rotational speed of the motor. As a result, the E-driving system of the electric tractor was possible to perform all major agricultural operations according to gear stages of range shift. Based on results of this research, we plan to develop an electric tractor equipped with an E-driving system and conduct research on actual vehicle verification in the future.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.623-634
• /
• 2007

The aim of this research is development and verification of resistivity seismic dilatometer (RSDMT) system. The resistivity module for obtaining resistivity-depth plot and seismic module for obtaining wave velocity-depth plot are attached to the conventional flat dilatometer testing equipment. To enhance reliability and repeatability of seismic part in RSDMT, automatic testing system including automatic surface source, PC based data acquisition system and operating program were developed. To obtain real resistivity value of soil, geometric factor for the array of electrodes in RSDMT was derived empirically. The verification studies for the developed RSDMT system were performed at the southeast side of Korea where soil improvement work is planned. SPT, CPT, geophysical subsurface imaging techniques and some laboratory tests were performed for the comparisons. As one penetration of RSDMT, various soil parameters could be obtained. The results of field test showed good repeatability and reliability in every part. From these studies, developed RSDMT system was checked and the effectiveness of this system was verified in light of proper evaluation of geotechnical characteristics of soft soil.

• 한국정보통신학회논문지
• /
• 제21권9호
• /
• pp.1796-1807
• /
• 2017

국내 함정 추진체계는 기계식 추진체계에서 복합식 추진체계로 넘어가는 단계에 위치하고 있으며, 추진체계가 복잡해지면서 함정 추진체계의 제어 감시 기능을 하는 ECS의 기능이 중요해질 것으로 예상된다. 최근 국내에서 ECS(Engineering Control System) 개발의 국산화가 진행되면서 ECS 개발 과정에서 신뢰성 및 안정성에 대한 검증이 요구되고 있다. 제안하는 시뮬레이터는 HILS로 구성되었으며, 모의 목적에 따라 동력전달을 모의하는 축물리모델과, 장비제어를 모의하는 제어기모델, ECS와 통신하는 통신모델로 나누어진다. 본 논문에서는 복합식 추진체계인 CODLOG 체계에 대하여 ECS 검증용 시뮬레이터를 개발하고 시나리오를 설정하여 시뮬레이션을 수행하였다

• 해양환경안전학회지
• /
• 제25권3호
• /
• pp.269-277
• /
• 2019

Since 2020, according to the International Convention for the Prevention of Pollution from Ships (MARPOL) amended in 2016, each Administration shall transfer the annual fuel consumption of its registered ships of 5,000 gross tonnage and above to the International Maritime Organization (IMO) after verifying them. The Administration needs stacks of materials, which must not be manipulated by ship companies, including the Engine log book and also bears an administrative burden to verify them by May every year. This study considers using the Automatic Identification System (AIS), mandatory navigational equipment, as an objective and efficient tool among several verification methods. Calculating fuel consumption using a ship's speed in AIS information based on the theory of a relationship between ship speed and fuel consumption was reported in several examples of relevant literature. After pre-filtering by excluding AIS records which had speed errors from the raw data of five domestic cargo vessels, fuel consumptions calculated using Excel software were compared to actual bunker consumptions presented by ship companies. The former consumptions ranged from 96 to 123 percent of the actual bunker consumptions. The difference between two consumptions could be narrowed to within 20 percent if the fuel consumptions for boilers were deducted from the actual bunker consumption. Although further study should be carried out for more accurate calculation methods depending on the burning efficiency of the engine, the propulsion efficiency of the ship, displacement and sea conditions, this method of calculating annual fuel consumption according to the difference between two consumptions is considered to be one of the most useful tools to verify bunker consumption.

• 전기학회논문지P
• /
• 제62권1호
• /
• pp.23-29
• /
• 2013

TCN(train communication network) standard was approved in 1999 by the IEC (IEC 61375-1) and IEEE (IEEE 1473-T) organizations to warrant a reliable train and equipment interoperability. TCN defines the set of communication vehicle buses and train buses. The MVB(multifunction vehicle bus) defines the data communication interface of equipment located in a vehicle and the WTB(wire train bus) defines the data communication interface between vehicles. The WTB and each MVB will be connected over a node acting as gateway. Also, to support applications demanding a high reliability, the standard defines a redundancy scheme in which the bus may be double-line and redundant-node implemented. In this paper we have presented protocol analysis platform for the WTB redundancy which is part of TCN system, to verify communication state of high-speed trains. As a confirmation of its validity, the technology described in this paper has been successfully applied to state monitoring and protocol verification of redundancy WTB based on TCN.

• 산업공학
• /
• 제24권3호
• /
• pp.187-195
• /
• 2011

The automatic radiopharmaceutical module consists of several 2-way valves, couple of syringes, gas supply unit, heating(cooling) unit and sensors to control the chemical reagents as well as to help the chemical reaction. In order to control the actuators of radiopharmaceutical module, the process is tabulated using spread sheet as like excel. Unlike the common program, a trivial error is too critical to allowed in the process because the error can lead to leak the radioactive reagent and to cause the synthesis equipment failure during synthesizing. Hence, the synthesis process has been validated using graphic simulation while the operator checks the whole process visually and undergoes trial and error. The verification of the synthesis process takes a long time and has a difficulty in finding the error. This study presents a methodology to verify the process algebraically while the radiopharmaceutical module is converted to the network model. The proposed method is validated using actual synthesis process.

• 한국기계가공학회지
• /
• 제18권9호
• /
• pp.72-80
• /
• 2019

In this task, the tool dynamometer design and manufacture, and the Ansys S/W structural analysis program for tool attachment that satisfies the cutting force measurement requirements of the tool dynamometer system are used to determine the cutting force generated by metal cutting using 3-axis static structural analysis and the LabVIEW system. The cutting power in a cutting process using a milling tool for processing metals provides useful information for understanding the processing, optimization, tool status monitoring, and tool design. Thus, various methods of measuring cutting power have been proposed. The device consists of a strain-gauge-based sensor fitted to a new design force sensing element, which is then placed in a force reduction. The force-sensing element is designed as a symmetrical cross beam with four arms of a rectangular parallel line. Furthermore, data duplication is eliminated by the appropriate setting the strain gauge attachment position and the construction of a suitable Wheatstone full-bridge circuit. This device is intended for use with rotating spindles such as milling tools. Verification and machining tests were performed to determine the static and dynamic characteristics of the tool dynamometer. The verification tests were performed by analyzing the difference between strain data measured by weight and that derived by theoretical calculations. Processing test was performed by attaching a tool dynamometer to the MCT to analyze data generated by the measuring equipment during machining. To maintain high productivity and precision, the system monitors and suppresses process disturbances such as chatter vibration, imbalances, overload, collision, forced vibration due to tool failure, and excessive tool wear; additionally, a tool dynamometer with a high signal-to-noise ratio is provided.

• 한국항공우주학회지
• /
• 제49권10호
• /
• pp.871-877
• /
• 2021

항공기 결함은 항공기 운영 및 조종사의 생명과 직결된 중요한 사항으로 항공기 조종 중 발생하는 임무 소프트웨어의 결함은 조종사 임무수행 및 안전에 심각한 영향을 미친다. 항공기 개발을 주관하는 단체나 소프트웨어 결함을 개발 초기에 식별하고 제거하기 위해 프로세스를 강화하고 많은 공수와 시간을 할애하고 있지만 임무 소프트웨어의 특성상 타 항전 장비와 강한 기능적 결합도(Coupling) 및 높은 복잡도(Complexity)를 가지고 있어 기존 시험 방법을 통한 소프트웨어 결함 식별 및 제거에 제약이 따른다. 본 연구는 임무 컴퓨터 연동 장비의 통신 데이터 중 피드백 데이터의 기댓값 검증을 자동화하는 도구를 개발하여 데이터 무결성 검증을 통한 임무 소프트웨어 건전성 확보 및 시험 비용 감소 효과를 분석한다.

• 경영과정보연구
• /
• 제39권1호
• /
• pp.35-57
• /
• 2020

정부는 연구시설장비가 과학기술의 발전을 견인하는 매우 중요한 도구이자, 수단으로 여겨지면서 국가적으로 R&D와 연구시설장비에 대한 예산 투자를 지속적으로 확대하였다. 또한, 기 구축된 국가연구시설장비의 효율적 운영 및 체계적 관리의 필요성이 점차 대두되면서 2010년 12월, 국가연구시설장비 표준분류체계를 개발하였다. 그러나 연구현장에서는 국가연구시설장비의 NTIS(National Science and Technology Service) 정보수집 초기단계로 누적정보 부족에 따른 표준분류체계의 과학적 검증절차 부재와 동일계층 간 분류기준의 비일관성 문제가 여전히 한계로 제기되고 있다. 따라서 본 연구는 지난 2010년, 2015년 각 제/개정된 국가연구시설장비 표준분류체계(대분류 8개, 중분류 25개, 소분류 410개)의 분류 정확도를 측정하고자 선형판별분석(LDA)과 분산분석(ANOVA) 기법을 적용하여 2단계로 분석하였다. 또한, 본 연구 분석을 위해 지난 10년 동안 NTIS에 누적 등록된 정보데이터(Big-Data) 50,271건을 수집하여 이를 활용하였다. 이는 단순히 국내외 유사 분류체계와 전문가 의견을 토대로 만들어진 현(現) 국가연구시설 표준분류체계를 과학적으로 실증 검증한 첫 연구 사례에 해당된다. 본 연구 결과, 대분류 이하 중분류와 소분류로 분류된 개체 수의 집단별 판별정확도는 92.2% 로 매우 높은 수준이었고, 분산분석을 통한 사후검증에서는 대분류 8개 중 2개 집단의 변별력이 다소 낮게 나타나, 현(現) 표준분류체계 중 일부 개선이 필요한 것으로 조사되었다. 본 연구를 통해 현(現) 국가연구시설장비 표준분류체계가 향후 지속적으로 개선되길 바란다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.640-649
• /
• 2010

Coarse granular materials such as gravel and crushed stone have been used as an important fill materials to large soil structure of railway, road, dam and so on. Although much studies for general soil materials have been carried out domestically, the studies for coarse materials were insufficient. Particularly, it is the level in which the study for dynamic properties(Elastic modulus and damping ratio) of coarse materials, applies the foreign country literature. This is due to the lack of large equipment for element test. But large soil structures made of coarse granular materials are generally important infrastructures. Therefore, the reliable design parameters for coarse materials should be obtained for safe and economic design, construction and maintenance. Triaxial test is the laboratory test method that is capable of controlling a confining pressure and boundary condition. In this project, we made a multi-purpose large triaxial testing system. This testing system is able to test coarse granular materials with maximum particle diameter of 100mm and support both the load control and displacement control. The load cell is installed inside of triaxial cell and the axial displacement is measured locally in order to control and measure more accurately in the small strain level. The verification test of this testing system was carried out with urethane verification specimens. So, from now on the useful information for coarse granular materials are expected to suggested by performing many tests with various material and condition.