• 제목/요약/키워드: Velocity slope

검색결과 427건 처리시간 0.023초

강우침투실험을 통한 불포화 풍화토 지반의 강우 침투속도 분석 (Analysis of Seepage Velocity in Unsaturated Weathered Soils Using Rainfall Infiltration Test)

  • 김훈;신호성;김윤태;박덕근;민덕기
    • 한국지반공학회논문집
    • /
    • 제28권2호
    • /
    • pp.71-78
    • /
    • 2012
  • 본 연구에서는 실내 강우침투실험을 통하여 강우강도에 따른 지반 내 침투속도를 산정하였으며, 침투특성을 분석하여 보았다. 또한 수치해석을 이용한 해석결과와 비교 검증을 수행하였으며, 시간에 따른 간극수압과 포화도 그리고 유출속도의 변화는 대체로 잘 일치함을 보였다. 강우강도에 따른 침투속도는 실내실험과 수치해석에서 선형적으로 증가하는 경향을 나타냈으며, 강우강도가 지반의 포화투수계수에 근접시 침투속도가 급격히 증가하였다. 또한 강우 침투시 습윤전선의 상부는 부분적으로 포화되어 침투하는 경향을 보였다. 따라서 실제 지반에서 습윤전선은 비교적 빠르게 진행하여 사면의 불안정을 초래할 것으로 판단된다.

경사로의 기울기와 높이에 따른 휠체어 사용자의 사용성 및 생리적 특성 분석 (Effects of Ramp Slope and Height on Usability and Physiology during Wheelchair Driving)

  • 김충식;이동훈;이지혜;권성혁;정민근
    • 대한인간공학회지
    • /
    • 제29권4호
    • /
    • pp.681-686
    • /
    • 2010
  • Although the height of a ramp is an important design element, it has not been considered in prior studies. Therefore, in this study, the ramp slope and height are considered as independent variables. To analyze the effects of the slope and height, five levels of slope (1:6, 1:8, 1:10, 1:12 and 1:14) and three levels of height (15cm, 30cm and 45cm) are considered. For the dependent variables, the total time, velocity and perceived discomfort were considered as usability measures, pulse rate changes and EMG signals of four related muscles (extensor carpi radialis, triceps brachii, anterior deltoid and posterior deltoid) were considered as physiology measures. As a result, differences among usability and physiological characteristic for the five slopes increased as the height increased. Additionally, slope effects were minor when the height was low (15cm). Almost domestic/international regulations and guidelines related to ramp recommended 1:12 slope for the ramp design, however, there was no significant difference between 1:10 and 1:12 according to result of this study. In addition, slope effects were minor at a low height; thus, a slope of 1:8 can be recommended if the installation space for a gentler ramp is not sufficient.

A Study on the Goal Setting Method for Increasing the Holed Probability in Slope Putting Stroke on an Artificial Putting Surface

  • Park, Jin;Kim, Ji Hyeon;Jung, Jong Min
    • 한국운동역학회지
    • /
    • 제27권4호
    • /
    • pp.269-278
    • /
    • 2017
  • Objective: The purpose of this study was to develop a goal setting method for increasing the probability of a holed in a side inclined putting stroke. Method: Three-dimensional video data was recorded at a frequency of 120 hz per second after synchronizing 19 infrared motion capture systems (Qualisys, Gothenburg, Sweden). Putting green used a polycarbonate plate ($1.2{\times}2.4{\times}0.01meter$) with coefficient of friction (${\mu}=0.062$) and a real curve of the actual hole. Results: The velocity ratio between the club and the ball was 1:1.6 under various ball speed conditions in this study. The overall position of the break is 1 m to 1.4 m from the point where the ball leaves. If there is a slope, the ball follows the target line by the straightening force, and when it reaches 1 m position, the straightening force decreases by 30~50% and reaches to the deviation (break) point which is severely influenced by the slope. From here, the ball is aimed in a direction other than the target, and the size is affected by the slope. Conclusion: If there is a side slope, the ball moves away from the straight line, and the larger the slope, the closer the break point is to the starting point of the ball. Therefore, it is necessary to calculate the degree of departure according to the slope carefully, and it is preferable that the slower the speed is, the more the influence of the slope becomes. It is preferable to use the center of the hole as a reference when calculating the departure.

진동저감 대책을 통한 절취면 보호 (Rock Surface Protection According to Decrease of Blasting Vibration)

  • 홍성민;송하림;강추원;장호민
    • 화약ㆍ발파
    • /
    • 제30권2호
    • /
    • pp.21-28
    • /
    • 2012
  • 사면 절취 및 도심지 터파기 등 인공적으로 사면을 형성하는 경우 경제적이고 효율적인 공법으로 화약을 이용한 발파공법이 많이 사용되고 있다. 절취면 보호를 위해 대상 암반에 손상을 주지 않고 암반이 가지고 있는 자연적인 강도를 그대로 유지할 수 있도록 발파하는 것이 중요하며 사회적으로 문제 시 되는 발파공해를 고려하여 발파진동을 저감할 수 있는 공법이 필요하다. 본 연구에서는 평활한 절취면 형성을 위하여 도폭선에 폭약을 등간격으로 배치하고 장약의 방법과 전색의 방법을 달리하여 발파를 진행하였다. 4가지 패턴을 사용하여 총 60공에서 20회 발파를 실시하였으며 발파원으로부터 15~120m 거리에서 발파진동소음측정기를 사용하여 진동속도를 측정하여 310개의 데이터를 획득하였다. 측정된 진동속도 데이터를 분석하여 발파진동을 저감하고 효율적이고 경제적으로 절취면을 보호할 수 있는 방법을 연구해 보았다.

보강제체사면의 침투거동평가 (Evaluation of The Seepage Behavior for Reinforced Embankment)

  • 신방웅;안병철
    • 한국안전학회지
    • /
    • 제15권1호
    • /
    • pp.146-152
    • /
    • 2000
  • To estimate the behavior of reinforced and unreinforced embankment constructed on a impermeable foundation ground, a laboratory model test was performed for two types of soils and water level increasing velocity of a flood period. The experiment models were constructed with slopes of water level is 1.25cm/min, 2.5cm/min each. From model test results, as the slope of reinforced and unreinforced embankment was the slower, the more seepage line rised. In the unreinforced embankment, the rising velocity of water level was the faster, the larger the embankment failure was. And the reinforced embankment with geotextile was the more safe than the unreinforced embankment for seepage force.

  • PDF

선형 위상 신호를 이용한 위상속도 측정에 관한 연구 (A Study on Phase Velocity Measurement using Linear Phase Signal)

  • 고덕영;김계국;이종악
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
    • /
    • pp.51-54
    • /
    • 1988
  • In this paper, Digital signal processing method is deserved by the tissue characteristic quantization. Linear phase velocity is studied using linear signal, and the slope which attenuation characteristics are decreased is analysed according to frequency increase. A more efficient method determining the minimum phase function is developed from the spectral magnitud function.

  • PDF

Shear Wave Velocity in Unconsolidated Marine Sediments of the Western Continental Margin, the East Sea

  • Kim, Gil-Young;Kim, Dae-Choul
    • The Journal of the Acoustical Society of Korea
    • /
    • 제22권4E호
    • /
    • pp.167-175
    • /
    • 2003
  • Shear wave velocity was measured and grain size analysis was conducted on two core samples obtained in unconsolidated marine sediments of the western continental margin, the East Sea. A pulse transmission technique based on the Hamilton frame was used to measure shear wave velocity. Duomorph ceramic bender transducer-receiver elements were used to generate and detect shear waves in sediment samples. Time delay was calculated by changing the sample length from the transducer-receiver element. Time delay is 43.18 μs and shear wave velocity (22.49 m/s) is calculated from the slope of regression line. Shear wave velocities of station 1 and 2 range from 8.9 to 19.0 m/s and from 8.8 to 22 mis, respectively. Shear wave velocities with depth in both cores are qualitatively in agreement with the compared model〔1〕, although the absolute value is different. The sediment type of two core samples is mud (mean grain size, 8-9Φ). Shear wave velocity generally increases with sediment depth, which is suggesting normally consolidated sediments. The complicated variation of velocity anisotropy with depth at station 2 is probably responsible for sediment disturbance by possible gas effect.

미소파괴음을 이용한 절토사면계측 (Rock Slope Monitoring using Acoustic Emission)

  • 장현익;김진광;김찬우;김경석;천대성
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회
    • /
    • pp.743-748
    • /
    • 2010
  • The stability forecasting of rock slope is more difficult than soil slope because catching the sign of failure in monitoring is not easy and deformation of the rock is small in failure process. But in the rock slope, there is small deformation like crack propagation in rock itself and it accumulates gradually in failure process. If it is possible to detect the small change in the rock slope, we can know the failure time exactly. Because the individual signal is gathered in the acoustic emission monitoring, it is possible to monitoring the slope if many sound signal is accumulated. Detection test of acoustic emission was performed. Uniaxial, two types of bending test, and two plane shear test were done with various cement paste sample. Wave propagation velocity of uniaxial test sample was increased with curing time. Wave Analysis give us the result that there is a AE sign signal before the failure, the AE count is suddenly increased. And frequency level 125kHz before failure is changed to level 200-250kHz after failure. In two plane shear test we can catch the AE signal and can know the failure type from wave shape. Monitoring test site is tunnel slope in Hongcheon but special signal is not collected.

  • PDF

유로만곡부의 횡방향 하상경사 산정 모형에 관한 연구 (A Study on Selected Transverse Bed Slope Models in Channel Bend)

  • 송재우;최인호;김지호
    • 대한토목학회논문집
    • /
    • 제14권6호
    • /
    • pp.1395-1404
    • /
    • 1994
  • 유로만곡부의 횡방향 하상경사는 하천형태학적 특성연구와 하도재해방지, 그리고 수공구조물 보호 등에 기초자료를 제공하는 중요한 연구과제이다. 본 연구에서는 연구대상유역 유로만곡부의 횡방향 하상경사를 Odgaard의 모형외 8개의 모형을 선택하여 비교분석한 후 예측하였으며 적합한 모형을 제시하였다. 본 연구에서 비교된 모든 모형들은 곡률반경과 수심에 비례하였고 모형들사이의 차이는 비례계수 K에 있으며 또한 측정된 횡방향 하상경사는 만곡부에서의 최대수심과 평균유속, 그리고 입자 Froude수와 관계가 있었다. 본 연구에서 Sacramento강 만곡부에서 이루어진 Odgaard의 실험자료를 이용하여 횡방향 하상경사모형들을 비교분석한 결과 Odgaard89모형이 실측횡방향 하상경사와 비교적 잘 일치하였다.

  • PDF

평형하상(平衡河床) 개념(槪念)과 공식(公式)의 하천실무(河川實務)에의 적용성(適用性)의 재고찰(再考察) (A Re-examination of the Applicability of the Concept and Formulas of Equilibrium Riverbed Slope to River Engineering Practice)

  • 우효섭;유권규
    • 대한토목학회논문집
    • /
    • 제12권2호
    • /
    • pp.101-108
    • /
    • 1992
  • 평형하상(平衡河床) 개념의 하천 실무에의 적용성 및 우리나라에서 평형하상경사를 추정하기 위해 널리 사용되어온 '안예(安藝)공식' 및 '물부(物部)공식'의 타당성에 대해 재고찰한다. 평형하천이란 장기간에 걸쳐 하천의 지배적인 수리(水理) 특성하에서 상류에서 공급되는 유사의 이송에 꼭 필요한 만큼의 유속이 생기도록 자연적으로 하상경사가 조정되어 실질적인 하상의 퇴적이나 침식이 없는 하천을 말하며, 평형하상이란 바로 그러한 하천의 하상상태를 지칭한다. 자연 상태에 있는 하천에 소위 '평형하상공식(平衡河床公式)'을 적용하여 그 하천의 하상상태를 분석하는 현재의 하천 실무는 지양되어야 할 것이다. 또한, 하천에서 안정하상 경사를 결정하기 위한 '안예(安藝)공식' 이나 '물부(物部)공식' 같은 소위 '평형하상공식'들은 그 타당성이 의심스러우며, 따라서 이러한 공식들의 하천 실무에의 적용은 지양되어야 할 것이다.

  • PDF