• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.19-30
• /
• 2012

The majority of daily travel demands concentrate at particular time-periods, which causes the difficulties in the travel demand analysis and the corresponding benefit estimation. Thus, it is necessary to consider time-specific traffic characteristics to yield more reliable results. Traditionally, na$\ddot{i}$ve, heuristic, and statistical approaches have been applied to address the peak-hour ratio. In this study, a hybrid clustering model which is one of the statistical methods is applied to calculate the peak-hour ratio and its duration. The 2009 national 24-hour traffic data provided by the Korea institute of Construction Technology are used. The analysis is conducted dividing vehicle types into passenger cars and trucks. For the verification for the usefulness of the methodology, the toll collection system data by the Korea Express Corporation are collected. The result of the research shows lower errors during the off-peak hours and night times and increasing error ratios as the travel distance increases. Since the method proposed can reduce the arbitrariness of analysts and can accommodate the statistical significance test, the model could be considered as a more robust and stable methodology. It is hoped that the result of this paper could contribute to the enhancement of the reliability for the travel demand analysis.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.139-144
• /
• 2015

Recently, to realize sound-absorbing structures, we have to insert sound-absorbing materials into wall. These shapes are taken limitations because sound-absorbing materials should be fixed. Therefore, the sound absorption is changed by environment that used the sound-absorbing materials. On the other hand, we will take same effect without sound-absorbing material, if we change the shape of wall to sound absorbing structure. If we use this sound absorbing structure, we can get benefits by removing limitation of materials. Therefore we suggest perforated plate for effective sound-absorbing structure. We confirmed the function of sound-absorption of this structure using equivalent property. Then, we found the similarity between perforated plate and resonator. Also, we verify these theories through computer simulation by FEM(Finite Element Method). Finally, we validated that perforated plate has function of sound absorption without sound-absorbing material. This perforated plate is used for sound-absorbing material of buildings and transportations such as vehicle, train etc. Also, these results could be further used basic tool for design of sound-absorption structure.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.116-126
• /
• 2013

Weather factor to affect driver's driving environment are due to changes in weather conditions is caused rainfall, snowfall, fog etc and the reducing of road capacity and because deteriorating weather could be affect the headway and vehicle speed and the decrease in lane caused by an accident occurs that was analyzed that bad weather occur congestion greater than on the clear day. Bad weather to reduce of the driver's visibility was analysed the sensitive to changes in travel speed and traffic accident to appears high characteristics according to weather conditions on the expressway(higher speed) than general road. As a result, visibility have been determined to be important factor in changes of the highway traffic flow characteristics. Therefore, in this study, we selected traffic volume and travle speed that have a major impact on high-speed expressway basic segments as importance effect factor and we selected to subject of analysis among the Metropolitan Expressway that it could be obtained certain level of traffic volume data and we studied the changing of expressway traffic flow due to change visibility after the collecting of meteorological and traffic data. In order to perform this study, data collection and analysis methods were established through the existing literature and we had selected level of visibility of the expressway and we had performed the statistical verification. Finally, we had calculated the rate of change of expressway traffic flow characteristics due to visibility and we had come up with a way to apply at capacity and service level analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.12
• /
• pp.1043-1053
• /
• 2016

In this paper, the application of Parallel Distributed Compensation (PDC) controller for fixed pitch rotary wing system was studied. For nonlinear modeling, T-S fuzzy model was utilized to advance system control including the tilt type UAV. PDC controller was designed through the Linear Matrix Inequality (LMI). Experiments for determining the applicability and feasibility of PDC were performed using the 1 axis attitude control equipment and simulation. To verify the performance and characteristics of the controller, Mathworks Co. Simulink was used. After then, the PDC controller performance was verified and the results with developed controller using a 1 axis attitude control equipment were compared. Verification of the feasibility of PDC controller for the fixed pitch rotary wing system and identification of the overall performance and improvement analysis was conducted based on the experimental results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.6
• /
• pp.1017-1023
• /
• 2017

Duration induced by freeway crashes has a critical influence on traffic congestion. In general, crash duration composes detection and verification, response, and clearance time. Of these, the crash clearance time determined by a crash clearance team has attracted considerable attention in the freeway congestion management since the interest of the first two time stages faded away with increasing ubiquitous mobile phone users. The objective of this study is to identify the critical factors that affect freeway crash clearance time using a Cox's proportional hazard model. In total, 6,870 crash duration data collected from 30 major Korean freeways in 2013 were used. As a result, it was found that crashes during the night, with trailer or larger size truck, and in tunnel section contribute to increasing clearance time. Crashes associated with fatality, completed damage of crashed vehicle (s), and vehicles' fire or rollover after crash also lead to increasing clearance time. Additionally, an increase in the number of vehicles involved resulted in longer clearance time. On the other hand, crashes in the vicinity of tollgate, by passenger car, during spring, on flat section, and of car-facility type had longer clearance time. On the basis of the results, this paper suggested some strategic plans and mitigation measures to reduce crash clearance time on Korean freeway systems.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.11
• /
• pp.965-972
• /
• 2016

This paper presents results of flight experiments on a navigation algorithm including multiplicative extended Kalman filter for estimating attitude of the guided munition. The filter describes orientation of aircraft by data fusion with low-cost sensors where measurement update is done by multiplication, rather than addition, which is suitable for quaternion representation. In determining attitude from vector observations, the existing approach utilizes a 3-axis accelerometer as a 2-axis inclinometer by measuring gravity to estimate pitch and roll angles, while GNSS velocity is used to derive heading of the vehicle. However, during accelerated maneuvers such as coordinated flight, the accelerometer provides inadequate inclinometer measurements. In this paper, the measurement update process is newly defined to complement the vulnerability by using different vector observations. The acceleration measurement is considered as a result of a centrifugal force and gravity during turning maneuvers and used to estimate roll angle. The effectiveness of the proposed method is verified through flight experiments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.532-542
• /
• 2018

Because maglev trains have a propulsion and absorption force without contact with the rails, they can drive safely at high-speed with little oscillation. Recently, test model of a maglev propulsion train was produced and operated, and has since been chosen as a national growth industry in South Korea; there have been many studies and considerable investment in these fields. This study examined the dynamic responses due to bridge-maglev train interaction and basic material to design bridges for maglev trains travelling at high-speed. Depending on the major factors affecting the dynamic effects, the scope of this study was restricted to the relationship between dynamic responses. A concrete box girder was chosen as a bridge model and injured train and rail types in domestic production were selected as the moving train load and guideway analysis model, respectively. From the analysis results, the natural frequency of a bridge for a maglev train, which has a deflection limit L/2000, was higher than those of bridges for general trains. The dynamic responses of the girder of the bridge for a maglev train showed a substantial increase in proportion to the velocities of the moving train like other general bridge cases. Maximum dynamic response of the girder is shown at a moving velocity of 240km/h and increased with increasing moving velocity of train. These results can be used to design a bridge for maglev propulsion trains and provide the basic data to confirm the validity and verification of the design code.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.692-700
• /
• 2007

A trial run of locally-developed tilting train has been in process on Chungbuk line since the test vehicle was first produced. For the system stabilization, interface verification among the systems including track, structure, catenary and signaling system, not to mention the rolling stock, is very crucial. In the area of wayside structure, the stability of track structure and train run shall be evaluated through the review of impact by increased speed by developed train on track structure. The study thus was intended to evaluate the impact on track while a tilting train is running the curve section, which is vulnerable to accelerated train speed. The analysis of tilting train test running the part of Chungbuk line and Honam line was conducted to identify the impact on existing track performance by tilting train. To identify the movement behavior of each part of track while tilting train, high speed train and traditional train (Mugunghwa and freight train) were running the existing line, wheel load, lateral wheel load, rail bending stress, vertical and lateral displacement of rail and vertical displacement of sleeper were compared and analyzed so as to evaluate the expected impact by tilting train for improving the train speed.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.119-127
• /
• 2011

The main purpose of this paper is to apply Zone 30 system which is being experimented in advanced country for the solution of controlling the residential street's speed to our country with the consideration of the real condition of our street and traffic and to run this system as an example to analyze the effect and at the same time, analyze the problem and get appropriate preparation for this system to be widespread. The area to run this model project is Goyang City Ilsan-Gu.($0.65km^2$) which is close with the commercial area reflecting the opinion of experts and an on-site verification by the National Police Agency T/F and is having a heavy pedestrian traffic and the risk of pedestrian accident. Firstly we defined residential street and residential street area to review the system and devided the residential street type to establish a plan of operation. Afterwards, we thoroughly examined the model project area and analyzed the problem and solution. We finally completed establishing a facilities by conference with a local autonomous entity with the improvement of facility's sketch at the analysis of the model project area. The result of effects analysis which we devided after and before of establishment is that vehicle speed be reduced 5~15km/h, and traffic accidents has decreased by 24 percent.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.208-217
• /
• 2016

This paper describes a simulation method to generate sensor measurements for location estimation of an underwater robot. Field trial of a navigation method of an underwater robot takes much time and expenses and it is difficult to change the environment of the field trial as desired to test the method in various situations. Therefore, test and verification of a navigation method through simulation is inevitable for underwater environment. This paper proposes a method to generate sensor measurements of range, depth, velocity, and attitude taking the uncertainties of measurements into account through simulation. The uncertainties are Gaussian noise, outlier, and correlation between the measurement noise. Also, the method implements uncertainty in sampling time of measurements. The method is tested and verified by comparing the uncertainty parameters calculated statistically from the generated measurements with the designed uncertainty parameters. The practical feasibility of the measurement data is shown by applying the measurement data for location estimation of an underwater robot.