• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.183-186
• /
• 2010

Advanced Railway countries are developing technologies of production and management for low-carbon and green growth of their railway industry to hold a dominant position under post-Tokyo protocol regime through integrated approach which uses environmental quantitative analysis of train life cycle by using LCA(Life Cycle Assessment). On the contrary, Korea railroad industry attempts to make an environmental improvement only for using regenerative energy and improvement in operating energy consumption through adapting reduction weight of material technology and etc. without systematic environmental analysis approaches such as comparing and analyzing energy consumption as well as GHG emission in each life cycle stages of train. Therefore, In this paper, low-carbon management and comprehensive environmental improvement for sustainable development of Korea railway industry through analyzing the result of life cycle analysis in abroad are suggested.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 추계학술대회 논문집
• /
• pp.181-182
• /
• 2003

경유엔진은 가솔린엔진에 비해 연소특성상 연료소비효율이 우수하여 온실가스인 $CO_2$ 배출이 적은 반면 대기 및 인체위해성이 높은 NOx와 입자상물질(PM)의 배출이 많아 대기저감을 위한 연료의 고압분사, 전자제어식 EGR기술등 엔진개량기술과 매연여과장치, De-NOx등 후처리기술 그리고 대체연료사용 기술등 다양한 저감대책이 전세계적으로 강구되고 있다. 특히 경유엔진에서 배출되는 오염물질로 인한 대기오염영향은 점차 증가하고 있어 대체연료사용 및 배출허용기준강화둥 우리 실정에 적합한 효율적인 대기저감대책이 강구되어야 할 것이다. (중략)

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.49-54
• /
• 2003

The purpose of this work is to investigate the effect of premixed fuel on the reduction of exhaust emissions in premixed charge compression ignition engine. The premixed fuel is injected into the intake manifold to form homogeneous pre-mixture in the combustion chamber. The pre-mixture is ignited by a small amount of diesel fuel directly injected into the cylinder. In the case of gasoline as a premixed fuel of the engine, $NO_x$ and smoke concentration of exhaust emissions were reduced compared with the conventional diesel engine. But in the event of diesel fuel for premixed fuel, the rate of smoke reduction was small compared with the case of gasoline as a premixed fuel. HC and CO emissions were increased at high premixed ratio in the case of two premixed fuels. The combustion characteristics of the engine such as the combustion pressure, the rate of heat release, and other characteristics are compared.

• 한국자동차공학회논문집
• /
• 제16권2호
• /
• pp.128-135
• /
• 2008

EGR(exhaust gas recirculation) is considered as a most effective method to reduce the NOx emissions. But high EGR tolerance is always pursued not only for its advantages of the pumping loss reduction and fuel economy benefit in Gasoline-Hybrid engine. However, the occurrence of excessive cyclic variation with high EGR normally prevents substantial fuel economy improvements from being achieved in practice. Therefore, the optimum EGR rate should be carefully determined in order to achieve low fuel consumption and low exhaust emission. In this study, 2 liters gasoline engine with E-EGR system was used to investigate the effects of EGR on fuel efficiency, combustion stability, engine performance and exhaust emissions. With optimal EGR rates, the fuel consumption was improved by 4%. This improvement was achieved while a reduction in NOx emissions of 75% was accomplished. Increase of EGR gas temperature causes the charge air temperature to affect the knock phenomenon and moreover, the EGR valve lift changes for the same control signal.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.138-143
• /
• 2006

Modification of injector, oil ring tension reduction and oil pump rotor re-matching with optimization of relevant engine control parameters could drive fuel consumption reduction of HSDI diesel engine. A 5 holes injector was replaced with a 6 holes with smaller nozzle hole diameter and 1.5 k factor, and evaluated in a view of fuel economy and emission trade-offs. With introducing smaller nozzle hole diameter injector, PM(Particulate Matter) was drastically decreased for low engine load and low engine rpm. Modification of oil pump and oil ring was to reduce mechanical friction and be proved to better fuel economy. Optimization of engine operating conditions was a great help for the low fuel consumption. Influence of the engine operating parameters· including pilot quantity, pilot interval, air mass and main injection timing on fuel economy, smoke and NOx has been evaluated with 14 points extracted from NEDC(New European Driving Cycle) cycle. The fuel consumption was proved to $7\%$ improvement on an engine bench and $3.7\%$ with a vehicle.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.183-194
• /
• 2013

Liquid urea based SCR has been used in the market to reduce NOx in the exhaust emission of the diesel engine vehicle. This system has several problems at low temperature, which are freezing below $-12^{\circ}C$, solid deposit formation in the exhaust, and difficulties in dosing system at exhaust temperature below $200^{\circ}C$. Also, it is required complicated exhaust packaging equipment and mixer due to supply uniform ammonia concentration. In order to solve these issues, solid urea, ammonium carbonate, and ammonium carbamate are selected as ammonia sources for the application of solid SCR. In this paper, basic research on reaction rate of three ammonia-transporting materials was performed. TGA (Thermogravimetric Analysis) and DTA (Differential Thermal Analysis) tests for these materials are carried out for various heating conditions. From the results, chemical kinetic parameters such as activation energy and frequency factor are obtained from the Arrhenius plot. Additionally, from test results of DSC (Differential Scanning Calorimeter) for these materials, chemical kinetic parameters using the Kissinger method are calculated. Activation energies of solid SCR from this experiment are compared with proper data of literature study, then obtained data of this experiment are used for the design of reactor and dosing system for candidate vehicle.

• 대한기계학회논문집A
• /
• 제40권6호
• /
• pp.595-602
• /
• 2016

자동차용 휠 베어링은 회전운동을 전달하고 차량의 무게를 지지해주는 중요한 부품이다. 최근 $CO_2$ 배출가스 저감과 연비 규제에 따라서 자동차 경량화 및 소형화 요구는 점점 증가하고 있고, 이에 부응하여 베어링의 수명 평가기술은 더욱 그 필요성이 증가하고 있다. 휠 베어링의 내구수명은 고려해야 할 인자들이 매우 다양하며 이들이 서로 복잡하게 연관되어 있으므로 수명을 예측하는 것이 쉽지 않다. 본 논문에서는 자동차용 휠 베어링의 수명에 영향을 끼치는 많은 인자들 중에서 작동하중과 회전속도를 변화시키면서 수명을 시험하였고, 이를 ISO 국제표준에서 제안하는 이론수명인 기본정격수명과 보정정격수명 결과와 비교하였다. 이들 수명을 비교한 결과, 기본정격수명과 보정정격수명 모두 시험수명과 차이가 존재하며, 기본정격수명 보다 보정정격수명이 시험수명을 상대적으로 잘 예측함을 알 수 있었다.

• 한국기후변화학회지
• /
• 제3권4호
• /
• pp.259-270
• /
• 2012

소형 자동차의 에어컨은 보조 부품 중에서 가장 많은 에너지를 소모하는 장치이다. 국가별 자동차 $CO_2$ 저감 대책에는 고효율 에어컨 기술 적용시 인센티브를 부여하는 등 에어컨 가동으로 추가되는 $CO_2$ 저감 전략들이 포함되어 있다. 이러한 정책을 시행하기 위해 필요한 에어컨 가동 $CO_2$ 평가 방법은 각국별로 개발단계에 있다. 자동차 에어컨 가동시에 소모되는 에너지는 자동차의 주행모드뿐만 아니라, 온도, 습도 등 환경조건에도 상당히 영향을 받는다. 본 연구에서는 국내 소형 자동차의 에어컨 가동으로 인한 $CO_2$ 배출량을 다양한 주행모드와 온도 및 습도 조건에서 평가하였다. 시험차종간 비교 가능한 에어컨 가동 $CO_2$를 산정하기 위해서 시험 중에 발생하는 온, 습도 편차에 대해 특정 조건으로 보정할 수 있는 방안을 적용하였다. 평가 결과, 고효율 에어컨 기술이 적용된 시험자동차들은 약 50%의 에어컨 가동 $CO_2$ 저감효과가 나타났다. 자동차 배출 $CO_2$ 대비 에어컨 가동 $CO_2$의 비율을 고려하였을 때 고효율 에어컨 기술 적용으로 상당한 $CO_2$ 저감효과가 기대된다.

• 한국응용과학기술학회지
• /
• 제31권4호
• /
• pp.549-561
• /
• 2014

미국과 유럽 등지에서는 자동차용 경유의 방향족 함량이 대기 환경오염의 원인물질로 추정하고 있다. 경유의 총 방향족 및 다고리 방향족 함량 감소가 환경 유해배출가스 HC, NOx, PM 등을 감소시키기 때문이다. 국내에서도 급변하고 있는 차량기술 및 연료품질간의 상관성 규명이 필요한 실정이다. 따라서 본 연구에서는 국내 실정에 맞는 차량과 연료간의 상호작용에 의하여 발생될 수 있는 환경적 영향평가를 진행하였으며 대상으로는 2.2L급 국내 대표 차량 2종(DPF 유 무)과 국내 정제기술로 생산된 5종의 연료를 통하여 경유의 방향족 함량에 따른 배출가스 특성을 분석하였다.

• 한국대기환경학회지
• /
• 제27권4호
• /
• pp.460-471
• /
• 2011

A port has been regarded as a significant contributor to air pollution in the surrounding areas. Port-related air pollutants are released from not only marine vessels, but also various land-side sources at ports, which include cargo handling equipment, vehicles, locomotives, and fugitive dust sources by port activities such as bulk handling and vehicle movements. However, most studies in Korea have only focused on vessel emissions and there is a lack of information on the emissions from other sources at port. In this study, in order to establish the port-related emission inventory and evaluate the relative contribution of these sources to air emissions from the Port of Incheon, the emissions from land-side sources were estimated and the CAPSS (Clean Air Policy Support System) data for vessel emissions were used. In particular, the detailed information and activity data for the cargo handling equipment source were collected and the emission factors and emissions by equipment types were calculated using U.S. EPA methodologies. Total HC, CO, $NO_x$, $PM_{10}$, and $SO_2$ emissions from port-related sources including the vessel in 2007 were calculated as 229 ton/year, 638 ton/year, 4,861 ton/year, 307 ton/year, and 3,995 ton/year, respectively. It was found that the vessel was the largest contributor to air pollutant emissions from the port, the cargo handling equipment was responsible for about from 8% to 13% of HC, CO, and $NO_x$ emissions and the resuspended road dust contributed about 39% for $PM_{10}$ emissions. The results of this study will be used to establish the management and reduction strategies of air pollution in the port.