• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1217-1224
• /
• 2009

고정익 항공기가 3차원의 복잡한 경로를 추종하기 위해 필요한 비교적 간단하며 효과적인 유도 제어 방법을 제시한다. 소개되는 방법은 비선형 경로 추종 유도 기법을 외부 루프로 사용한다. 외부 루프는 원하는 경로와 함께 항공기의 현재 위치와 속도를 바탕으로 비행 경로를 변화하기 위한 가속도 명령을 생성한다. 가속도 명령은 중력과 벡터적으로 결합되어 Specific Force Acceleration을 만든다. 이렇게 생성된 Specific Force Acceleration은 내부 루프를 위한 명령으로 쓰이는데, 이는 항공기가 가속도 자체보다는 Specific Force Acceleration을 더 직접적으로 제어할 수 있기 때문이다. 나아가 배면 비행이나 Slow Roll, Knife-Edge 등과 같은 옆미끄럼짐 기동을 하기 위해 필요한 롤 자세 제어 기법도 제시한다. 마지막으로 표준이 되는 여러 가지 곡예비행 경로들에 대한 시뮬레이션을 수행함으로써 제시된 기법의 성능을 검증한다.

• 한국전자파학회논문지
• /
• 제18권12호
• /
• pp.1359-1369
• /
• 2007

본 논문은 이동 위성 관제 시스템을 위한 적응 배열 안테나 시스템에서 위성의 위치 파악과 빔 성형 기법에 관하여 서술한다. 이동시 위성 관제를 수행하려면 이동체에 대한 위성의 상대적 위치를 실시간적으로 파악하여 적응형 어레이 안테나 주 빔(main beam)을 위성으로 향하게 하여 위성 관제를 수행하여야 한다. 이를 위해서 고 해상도 전파 방향 탐지 알고리즘 중의 하나인 MUSIC(Multiple Source Idetification) 알고리즘을 사용하였고, 이에 대한 성능 분석과 아울러 구현시 위상 변환기의 양자화에 따른 영향에 대하여 분석하였다. 본 논문은 위상 배열 안테나를 이용하여 이동 위성 관제 시스템을 구현할 수 있음을 보여줌으로써 국내의 이동 위성 관제 시스템을 개발에 중요한 자료가 될 수 있다.

• 로봇학회논문지
• /
• 제15권3호
• /
• pp.221-232
• /
• 2020

In a four-wheel independent drive platform, four wheels and motors are connected directly, and the rotation of the motors generates the power of the platform. It uses a skid steering system that steers based on the difference in rotational power between wheel motors. The platform can control the speed of each wheel individually and has excellent mobility on dirt roads. However, the difficulty of the straight-running is caused due to torque distribution variation in each wheel's motor, and the direction of rotation of the wheel, and moving direction of the platform, and the difference of the platform's target direction. This paper describes an algorithm to detect the slip generated on each wheel when a four-wheel independent drive platform is traveling in a harsh environment. When the slip is detected, a compensation control algorithm is activated to compensate the torque of the motor mounted on the platform to improve the trajectory tracking performance of the platform. The four-wheel independent drive platform developed for this study verified the algorithm. The wheel slip detection and the compensation control algorithm of the platform are expected to improve the stability of trajectory tracking.

• 한국지능시스템학회논문지
• /
• 제17권3호
• /
• pp.343-348
• /
• 2007

전 세계적으로 차량의 급속한 증가로 인해 지능형 교통시스템에 대한 연구가 활발히 진행 되고 있다. 그중 차량의 자율주행에 관한 연구가 한 분야를 차지한다. 그리고 차량의 자율주행은 경로인식이 기본적인 요소이다. 기존의 자계기반 자율주행 시스템은 3축 자계 센서로 자석마커의 3차원의 데이터를 분석하여 경로를 인식하였다. 그러나 본 논문에서는 Magnetic Wire와 자기거리계를 이용하여 측면 이탈거리를 계측하여 주행하는 시스템을 제안한다. 그리고 기존 자율주행 차량의 시스템과 비교하고 제안하는 시스템이 저사양의 하드웨어와 간단한 알고리즘으로 자율주행이 가능함을 실험을 통해 검증하고자 한다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권4호
• /
• pp.201-212
• /
• 2000

In this paper, an adaptive mechanism based on immune algorithm is designed and it is applied for the autonomous guided vehicle(AGV) driving. When the immune algorithm is applied to the PID controller, there exists the cast that the plant is damaged due to the abrupt change of PID parameters since the parameters are adjusted almost randomly. To solve this problem, a neural network is used to model the plant and the parameter tuning of the model is performed by the immune algorithm. After the PID parameters are determined in this off-line manner, these gains are then applied to the plant for the on-line control using immune adaptive algorithm. Moreover, even though the neural network model may not be accurate enough intially, the weighting parameters are adjusted to be accurate through the on-line fine tuning. The computer simulation for the control of steering and speed of AGV is performed. The results show that the proposed controller has better performances than other conventional controllers.

• 제어로봇시스템학회논문지
• /
• 제16권5호
• /
• pp.489-497
• /
• 2010

This paper presents the design of hardware platform, which is a test bed for the navigation system and hovering type AUV (Autonomous Underwater Vehicle) under the OCP (Open Control Platform). The developed AUV test bed consists of two hulls, four thrusters, and the navigation system which uses a SBC2440II with IMU (Inertial Measurement Unit). And the SMC (Sliding Mode Control) is chosen for the diving and steering control of the AUV. This paper uses ACE/TAO RTEC (Real-Time Event Channel) as a middleware platform in order to control and communicate in the developed AUV test bed. In this paper, two computers are used and each of them is dedicated for the specific purpose, the first computer is used as the SMC module and the middleware platform for the ACE/TAO RTEC and the second computer is used for the sensor controller. We analyze the performance of the AUV test bed under the OCP.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.142-153
• /
• 2005

The brake judder is a phenomenon that the steering wheel is abnormally vibrating when the car is braked at a high speed. It is classified by the cold and the hot judder. The former is generated due to the initial uneven disk surface and the latter is resulted from the uneven heat spots on disc surface by repeatedly braking. There are two ways to reduce the judder. One is to control vibration by modification of the disk shapes and pad ingredients. The other is to improve modal characteristics of the suspension system. The latter approach is used in this research. In this paper, the real vehicle test and computer simulation are considered to systematically understand the judder phenomenon of the vehicle. The Macpherson strut suspension is employed. Especially, the judder sensitivity is calculated based on design sensitivity analysis. A bush stiffness was reworked and braking test was done to verify the sensitivity result. The judder reduction by the mode control was verified.

• 한국항해항만학회지
• /
• 제35권5호
• /
• pp.359-363
• /
• 2011

본 연구에서는 만타 형상을 가진 무인잠수정(Manta-type unmanned underwater test vehicle)의 제어 성능 평가를 수행 하였다. 제어 방법으로서 PID제어, Fuzzy 제어가 적용되었으며, 6자유도 운동 수학모델과 Matlab Simulink을 이용하여 조종 운동 시뮬레이션을 수행하였다. 또한, 설계된 제어기로 수심제어 및 방위제어에 적용하여, 조류의 외란 하에서 제어 성능을 평가하였다.

• 한국항만학회지
• /
• 제14권2호
• /
• pp.187-197
• /
• 2000

In this paper, an adaptive mechanism based on immune algorithm is designed and it is applied to the driving control of the autonomous guided vehicle(AGV). When the immune algorithm is applied to the PID controller, there exists the case that the plant is damaged by the abrupt change of PID parameters since the parameters are adjusted almost randomly. To solve this problem, a neural network used to model the plant and the parameter tuning of the model is performed by the immune algorithm. After the PID parameters are determined through this off-line manner, these parameters are then applied to the plant for the on-line control using immune adaptive algorithm. Moreover, even though the neural network model may not be accurate enough initially, the weighting parameters are adjusted more accurately through the on-line fine tuning. The experiment for the control of steering and speed of AGV is performed. The results show that the proposed controller provides better performances than other conventional controllers.

• International Journal of Automotive Technology
• /
• 제6권2호
• /
• pp.141-148
• /
• 2005

In order to reduce the time and costs of improving the performance of vehicle suspensions, the techniques for optimizing damping and air spring characteristic were proposed. A full vehicle model for a bus is constructed with a car body, front and rear suspension linkages, air springs, dampers, tires, and a steering system. An air spring and a damper are modeled with nonlinear characteristics using experimental data and a curve fitting technique. The objective function for ride quality is WRMS (Weighted RMS) of the power spectral density of the vertical acceleration at the driver's seat, middle seat and rear seat. The objective function for handling performance is the RMS (Root Mean Squares) of the roll angle, roll rate, yaw rate, and lateral acceleration at the center of gravity of a body during a lane change. The design variables are determined by damping coefficients, damping exponents and curve fitting parameters of air spring characteristic curves. The Taguchi method is used in order to investigate sensitivity of design variables. Since ride and handling performances are mutually conflicting characteristics, the validity of the developed optimum design procedure is demonstrated by comparing the trends of ride and handling performance indices with respect to the ratio of weighting factors. The global criterion method is proposed to obtain the solution of multi-objective optimization problem.