• 자동차안전학회지
• /
• 제10권3호
• /
• pp.7-12
• /
• 2018

The Korean New Car Assessment Program (KNCAP) is a program to evaluate the safety of automobiles. In the safety assessment method, there are frontal collision, partial frontal collision, side collision, pillar collision, and left stability in the collision safety category. Among them, Korean in-depth analysis data shows that there are a lot of side collision accidents and it is necessary to protect them. This study will analyze the side collision accident that occurred in actual traffic accident based on Korea In-Depth Accident Study (KIDAS) and investigate the effect of center airbag on passenger in under side collision. In addition, with simulated side collision scenarios in the various side impact directions, it was investigated how the center airbag affects the driver and passenger in terms of kinematic and injury levels.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.131-136
• /
• 2010

This study deals with the accident models of arterial link sections by vehicle type. The objectives are to analyze the characteristics of accidents, and to develop the models by type. In pursuing the above, this study uses the data of 414 accidents occurred on 24 major arterial links in 2007. The main results analyzed are as follows. First, the number of accidents is analyzed to account for about 47% in passenger car, 15% in SUV and 10% in trucks. Second, 3 Poisson regression models which are all statistically significant are developed using passenger car, SUV and truck as dependant variables. Finally, AADT and the number of traffic islands as common variables, and the number of pedestrian crossings, lanes, connecting roads, intersections(4-Leg), rate of medians and the number of bus stops as specific variables of the models are selected.

• 자동차안전학회지
• /
• 제9권4호
• /
• pp.14-19
• /
• 2017

The mortality rate of car-pedestrian accidents is quite high compared to the frequency of accident. Recently, governments and insurance companies tend to establish and implement new safety standards for pedestrian protection such as EURO-NCAP and K-NCAP. The performance for the pedestrian protection has been gradually improved, but it is still insufficient. Therefore, various studies for the pedestrian protection are being carried out. The car-pedestrian accident is simulated in order to study to the upper legform test of the EURO-NCAP protocol. A pedestrian dummy model is employed and the results are discussed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1524-1530
• /
• 2008

Generally a road vehicle's wrong entry into level crossing gives rise to hazardous events, the eventual collision with a approaching train depends on the effective operation of safety barriers such a abnormal condition detecting or emergency braking. In this paper, the risk assessment models developed for the level-crossing accidents will be introduced. The definition of hazardous events and the related hazardous factors are identified by the review of the accident history and engineering interpretation of the accident behavior. A probability of the hazardous events will be evaluated by the FTA, which is based on the accident scenario. For the severity estimation, the critical factors which can effect on the consequence will be reviewed during the ETA. Finally, the number of casualty for the public(vehicle drivers) and the train passengers are converted into an equivalent fatality.

• 한국ITS학회 논문지
• /
• 제22권2호
• /
• pp.54-63
• /
• 2023

보행 교통사고를 예측하기 위해서는 보행 및 차량 통행량을 정확히 반영해야 한다. 그러나 보행량은 차량 통행량에 비해 측정에 어려움이 있다. 기존 연구는 직접 조사, 가구통행실태조사 등을 통해 추정하였지만 이는 많은 비용과 시간이 소요되며 정확도가 떨어진다. 이에 본 연구는 적은 시간과 비용으로 실시간으로 데이터를 수집 및 분석할 수 있는 스마트폰을 활용한 모바일 cctv를 대안으로 제시하였다. 본 연구는 사고로 발전할 수 있는 보행자-차량간 상충을 보행사고 노출로 정의하였다. 대구 동성로 일대의 40개 구간에 모바일 cctv를 설치한 후, 수집된 데이터를 활용하여 음이항 회귀분석을 통해 보행사고 노출을 추정한다. 분석 결과 보행사고 노출 변수들도 통계적으로 유의한 결과를 보인다. 분석 결과를 통해 보행사고 노출 추정 모형을 개발하였고, 이를 통해 잠재적으로 보행사고 발생할 수 있는 구간을 도출하는 것에 활용될 수 있음을 보여준다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권4호
• /
• pp.71-82
• /
• 2020

Traffic accidents due to excessive speed frequently occur in places where traffic signal controllers are installed, places where sharp curves exist, or places where the traffic signal cycle does not match the current time. These traffic accidents cause economic loss due to the destruction of road facilities and structures, and cause a big problem of increasing the number of traffic accident deaths. When a traffic accident occurs, leaving a tire mark before or after a car crash, pre-collision speed of the car is calculated using the law of conservation of momentum or the skid mark formula. In the skip skid mark generated in ABS brake vehicles and the combshaped yaw mark generated by tire trace caused by lateral sliding, there is a difference of 30-40% in the reliability of the vehicle speed calculated by the smite mark. In this paper, we propose an algorithm that can improve the calculation reliability in vehicle speed by using skid marks in order to compensate for this problem. In addition, we present an intelligent speed calculation algorithm for traffic safety and a computer simulation in order to prevent traffic accidents by estimating the speed of a vehicle, using Skid marks, Yaw marks, and ABS brake characteristics and fuzzy rules.

• 디지털융복합연구
• /
• 제10권9호
• /
• pp.319-324
• /
• 2012

차량 안전 통신은 교통사고 예방에 중요한 기술 중 하나이다. 이를 위해 교통사고가 발생하면 연쇄 추돌 사고를 예방하기 위한 안전 메시지를 전달하는 많은 프로토콜이 연구되었다. 이러한 프로토콜은 노드가 안전 메시지를 발생시키는 시점을 교통사고가 발생 했을 경우로 가정한다. 만약, 교통사고 위험을 예측하여 안전 메시지를 전달한다면 운전자는 빠른 대응 조치가 가능하다. 그래서 본 논문에서는 통신 기법을 이용한 교통사고 위험 예측 알고리즘을 제안한다. 결과적으로, 제안된 알고리즘을 기존 프로토콜에 적용한 결과 약 4~5 %의 더 높은 프레임 수신율을 보여주었다.

• 자동차안전학회지
• /
• 제15권3호
• /
• pp.53-58
• /
• 2023

Defects in the vehicle itself were considered the biggest risk factor for traffic accidents as the electrical and electronic components of vehicles, which were not there before, increase. Therefore, the vehicles have been developed based on ISO 26262 (an international functional safety standard) which is focusing on functional defect safety evaluation of electrical and electronic component systems. However, in the future, as autonomous driving technology is applied, even vehicles without functional defects must be prepared for the dangerous traffic situation that may arise from exceptional or external factors. SOTIF (Safety Of The Intended Functionality) is a concept to prevent exceptional or external factors. The main objective of SOTIF is to decrease Unknown & Unsafe factors as much as possible by finding Known factors and Unsafe factors. In this study, Prescan provided SIEMENS, one of the autonomous driving simulators, is used to make scenarios of IGLAD traffic accident cases. From the simulation results, Unsafe & Safe cases were classified and analyzed to derive unsafe factors.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2008년도 춘계학술발표논문집
• /
• pp.157-159
• /
• 2008

AHP를 사용하 교통망 사고 예방 처리 기법은 아직 우리나라에서는 처음 시도되어지는 예방법이라 할수 있다. 인공지능을 사용하여 사고처리하는 방법을 시도를 하였보았으나 그 외의 방법은 문외한이라 할수 있을 정도로 우리나라에서는 보기드문 현상이라 할수 있다. 따라서 계층분석기법을 사용하여 요소분석보다 훨씬 나은 처리방법이므로 좀더 나은 기법이 될 것 같고 다음으로 처리되는 방법의 기본 모티브가 될 영향이 크다라고 한다.

• 제어로봇시스템학회논문지
• /
• 제18권7호
• /
• pp.688-698
• /
• 2012

This paper deals with ROLSO (Reduced Order Luenberger State Observer) design to prevent jackknifing phenomenon of articulated vehicles consisting of the tractor and semi-trailer by using GPS. In addition, by applying the regulator system using ROLSO feedback system, simulation's result presents that articulated vehicle's states are stabilized than the human's PR time (Preception Response time) rapidly. This simulation verifies that the automatic control of articulated vehicle's can be applied for the accident prevention for the time that the driver is unable to manage with the sudden accident. For this simulation, by using the equation of planar motion, the modeling of the articulated vehicle was performed. This modeling was expressed in the state space model. And FOLSO (Full Order Luenberger State Observer), ROLSO were designed by using the state space model of an articulated vehicle's dynamics.