• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.7-12
• /
• 2018

The Korean New Car Assessment Program (KNCAP) is a program to evaluate the safety of automobiles. In the safety assessment method, there are frontal collision, partial frontal collision, side collision, pillar collision, and left stability in the collision safety category. Among them, Korean in-depth analysis data shows that there are a lot of side collision accidents and it is necessary to protect them. This study will analyze the side collision accident that occurred in actual traffic accident based on Korea In-Depth Accident Study (KIDAS) and investigate the effect of center airbag on passenger in under side collision. In addition, with simulated side collision scenarios in the various side impact directions, it was investigated how the center airbag affects the driver and passenger in terms of kinematic and injury levels.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.131-136
• /
• 2010

This study deals with the accident models of arterial link sections by vehicle type. The objectives are to analyze the characteristics of accidents, and to develop the models by type. In pursuing the above, this study uses the data of 414 accidents occurred on 24 major arterial links in 2007. The main results analyzed are as follows. First, the number of accidents is analyzed to account for about 47% in passenger car, 15% in SUV and 10% in trucks. Second, 3 Poisson regression models which are all statistically significant are developed using passenger car, SUV and truck as dependant variables. Finally, AADT and the number of traffic islands as common variables, and the number of pedestrian crossings, lanes, connecting roads, intersections(4-Leg), rate of medians and the number of bus stops as specific variables of the models are selected.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.4
• /
• pp.14-19
• /
• 2017

The mortality rate of car-pedestrian accidents is quite high compared to the frequency of accident. Recently, governments and insurance companies tend to establish and implement new safety standards for pedestrian protection such as EURO-NCAP and K-NCAP. The performance for the pedestrian protection has been gradually improved, but it is still insufficient. Therefore, various studies for the pedestrian protection are being carried out. The car-pedestrian accident is simulated in order to study to the upper legform test of the EURO-NCAP protocol. A pedestrian dummy model is employed and the results are discussed.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1524-1530
• /
• 2008

Generally a road vehicle's wrong entry into level crossing gives rise to hazardous events, the eventual collision with a approaching train depends on the effective operation of safety barriers such a abnormal condition detecting or emergency braking. In this paper, the risk assessment models developed for the level-crossing accidents will be introduced. The definition of hazardous events and the related hazardous factors are identified by the review of the accident history and engineering interpretation of the accident behavior. A probability of the hazardous events will be evaluated by the FTA, which is based on the accident scenario. For the severity estimation, the critical factors which can effect on the consequence will be reviewed during the ETA. Finally, the number of casualty for the public(vehicle drivers) and the train passengers are converted into an equivalent fatality.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.54-63
• /
• 2023

Pedestrian traffic needs to be accurately quantified to predict effectively pedestrian traffic accidents, however, pedestrian traffic is more difficult to measure than vehicle traffic. In this study, we suggest the time-and cost-effective application of mobile closed-circuit television (CCTV) using a smartphone as an alternative that can collect and analyze real-time data with little. In the present investigation, the pedestrian-vehicle conflict that can develop into an accident was defined as the pedestrian accident exposure. After installing mobile CCTV in 40 sections of Dongseong-ro, Daegu, the pedestrian accident exposure was estimated through negative binomial regression analysis using the collected data. The results of the analysis showed statistically significant changes in the pedestrian accident exposure variables. Based on the present results, a pedestrian accident exposure estimation model was developed which can be used in sections where pedestrian accidents may occur.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.71-82
• /
• 2020

Traffic accidents due to excessive speed frequently occur in places where traffic signal controllers are installed, places where sharp curves exist, or places where the traffic signal cycle does not match the current time. These traffic accidents cause economic loss due to the destruction of road facilities and structures, and cause a big problem of increasing the number of traffic accident deaths. When a traffic accident occurs, leaving a tire mark before or after a car crash, pre-collision speed of the car is calculated using the law of conservation of momentum or the skid mark formula. In the skip skid mark generated in ABS brake vehicles and the combshaped yaw mark generated by tire trace caused by lateral sliding, there is a difference of 30-40% in the reliability of the vehicle speed calculated by the smite mark. In this paper, we propose an algorithm that can improve the calculation reliability in vehicle speed by using skid marks in order to compensate for this problem. In addition, we present an intelligent speed calculation algorithm for traffic safety and a computer simulation in order to prevent traffic accidents by estimating the speed of a vehicle, using Skid marks, Yaw marks, and ABS brake characteristics and fuzzy rules.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.319-324
• /
• 2012

Vehicle safety communications is one among the important technologies in order to protect a car accident. For this, many protocols forwarding a safe message have studied to protect a chain-reaction collision when a car accident occurs. most of these protocols assume that the time of generating a safe message is the same as an accident's. If a node predicts some traffic hazard and forwards a safe message, a driver can response some action quickly. So, In this paper, we proposes a traffic hazard prediction algorithm using the communication technique. As a result, we show that the frame reception success rate of using our algorithm to the previous protocol improved about 4~5%.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.3
• /
• pp.53-58
• /
• 2023

Defects in the vehicle itself were considered the biggest risk factor for traffic accidents as the electrical and electronic components of vehicles, which were not there before, increase. Therefore, the vehicles have been developed based on ISO 26262 (an international functional safety standard) which is focusing on functional defect safety evaluation of electrical and electronic component systems. However, in the future, as autonomous driving technology is applied, even vehicles without functional defects must be prepared for the dangerous traffic situation that may arise from exceptional or external factors. SOTIF (Safety Of The Intended Functionality) is a concept to prevent exceptional or external factors. The main objective of SOTIF is to decrease Unknown & Unsafe factors as much as possible by finding Known factors and Unsafe factors. In this study, Prescan provided SIEMENS, one of the autonomous driving simulators, is used to make scenarios of IGLAD traffic accident cases. From the simulation results, Unsafe & Safe cases were classified and analyzed to derive unsafe factors.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.157-159
• /
• 2008

This paper has been studied traffic accident using intelligence prediction algorithm. and wish to prevent accident by guiding in 2 km ahead the accident that occur in fog section and a snow-covered road, sudden roadworks and sharp curve section, etc and removing fog and snow automatically using the ubiquitous and intelligence technique. If we can predict of traffic accident, we can prevent the many traffic accident. In this paper, we present neural network approach for prediction of traffic accident. Computer simulation results prove that reducing the average vehicle waiting time which proposed considering prevention of traffic algorithm for optimal traffic cycle is better than fixed signal method which dose not using prevention of traffic algorithm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.7
• /
• pp.688-698
• /
• 2012

This paper deals with ROLSO (Reduced Order Luenberger State Observer) design to prevent jackknifing phenomenon of articulated vehicles consisting of the tractor and semi-trailer by using GPS. In addition, by applying the regulator system using ROLSO feedback system, simulation's result presents that articulated vehicle's states are stabilized than the human's PR time (Preception Response time) rapidly. This simulation verifies that the automatic control of articulated vehicle's can be applied for the accident prevention for the time that the driver is unable to manage with the sudden accident. For this simulation, by using the equation of planar motion, the modeling of the articulated vehicle was performed. This modeling was expressed in the state space model. And FOLSO (Full Order Luenberger State Observer), ROLSO were designed by using the state space model of an articulated vehicle's dynamics.