• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1B
• /
• pp.1-11
• /
• 2010

In this study, To analyzed the monthly long-term change characteristics of Chukwooki rainfall data set (CWK) and modern rain gage rainfall data set (MRG), tests of trend or variation were performed of each data sets using five statistical trend or variation test method. furthermore, changing characteristics of rainfall was analyzed through the accomplishment of the 2-dimensional LOWESS regression (or smoothing) which can consider both annual time-variation and inter-monthly time-variation. From the trend test, it is difficult to confirm that given data sets have significant trends. From the 2-dimensional LOWESS analysis for four rainfall characteristics, after near A.D. 1980, inter-monthly variation width in addition to quantative increment of rainfall are increased rapidly and persistently.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.214-215
• /
• 2007

Int this paper, we studied the analysis on long-term durability and output power characteristics of PV modules by variation on local thermal property. Using 5 modules(80W), we measured the maximum output power change during the test period. And the optical transmittance of glass was compared with PV module's maximum power fluctuation. The external environment change effected contamination on the entire or local surface of module. This caused the local temperature variation of each solar cell on PV module. The specific analysis is shown in the following paper.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.233-236
• /
• 2006

In this paper, I try to measure the electrical characteristics of PV cell for lanterns with solar simulator and simulated with PC1D software. 1 keep my eye on the characteristics variation of PV cell as a temperature change. Therefore, I try to increase a temperature of controlled block from $10^{\circ}C\;to\;50^{\circ}C$ while measuring the PV cell. As a result A variation caused by voltage have an effect on the efficacy of PV cell. Hence, it is an important variable when a designer plan to make a solar cell for lanterns.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.6
• /
• pp.497-506
• /
• 2015

Gravity variations due to the 2011 Tohoku (M9.0) earthquake, which occurred at the plate boundaries near the northeastern coast of Japan, were estimated through the GRACE spherical harmonic (Stokes) coefficients derived from the CSR. About -5 μGal gravity variation by the GRACE data was found in the back-arc basin area with respect to a reference gravity model. The mean gravity variations in the back-arc basin area and the Japan Trench area were -4.4 and -3.2 μGal in order. The small negative gravity variations around the Japan Trench area can be interpreted by both crustal dilatation and the seafloor topography change in comparison with the large negative gravity variations in the back-arc basin area by co-seismic crustal dilatation of the landward plate. From the results of the gravity variations, vertical displacements generated from relatively short wavelength caused by the earthquake were estimated by use of multi-beam bathymetric measurements obtained from JAMSTEC. The maximum seafloor topography changes of about ±50 m were found at west side of the Japan Trench axis by the earthquake. The seafloor topography change by the megathrust earthquake can be considered as the results of the landslide of the seafloor throughout the landward side.

• Smart Structures and Systems
• /
• v.17 no.6
• /
• pp.859-880
• /
• 2016

This study aims to establish an effective methodology for the detection of instant damages occurred in cable-stayed bridges with the measurements of cable vibration and structural temperatures. A transfer coefficient for the daily temperature variation and another for the long-term temperature variation are firstly determined to eliminate the environmental temperature effects from the cable force variation. Several thresholds corresponding to different levels of exceedance probability are then obtained to decide four upper criteria and four lower criteria for damage detection. With these criteria, the monitoring data for three stay cables of Ai-Lan Bridge are analyzed and compared to verify the proposed damage detection methodology. The simulated results to consider various damage scenarios unambiguously indicate that the damages with cable force changes larger than ${\pm}1%$ can be confidently detected. As for the required time to detect damage, it is found that the cases with ${\pm}2%$ of cable force change can be discovered in no more than 6 hours and those with ${\pm}1.5%$ of cable force change can be identified in at most 9 hours. This methodology is also investigated for more lightly monitored cases where only the air temperature measurement is available. Under such circumstances, the damages with cable force changes larger than ${\pm}1.5%$ can be detected within 12 hours. Even though not exhaustively reflecting the environmental temperature effects on the cable force variation, both the effective temperature and the air temperature can be considered as valid indices to eliminate these effects at high and low monitoring costs.

• The Journal of Engineering Geology
• /
• v.24 no.3
• /
• pp.333-341
• /
• 2014

The construction of roads, tunnels, and bridges results in changes to the local terrain that may influence the ground safety factor, which represents the stability of geotechnical structures. In this study, we assessed construction sites that had collapsed as a result of terrain change, and then simulated variation in the ground safety factor with respect to terrain change caused by road construction. We assumed steep slopes to simulate changes in terrain in a mountainous area and assumed that earthworks took place for road construction by cutting a platform into the slope and altering the slope angle of the terrain both above and below the road. We calculated values of the ground safety factor through a stability analysis of the slope both above and below the road, and examined the variation in the safety factor of the above- and below-road slopes with respect to changes in road width. We found that if the slope angle was the same above and below the road, then the change in the ground safety factor during/after road construction occurred in the slope below the road, and if the slope angle above the road differed from that below, then the change occurred in both the above- and below-road slopes. Furthermore, the ground safety factor was essentially constant for road widths exceeding 2-6 m, depending on both above- and below-road slope angle. The findings of this study can be used to guide the management of construction sites and to assess changes in ground stability during road construction work, particularly in the early stages of earthworks, when the road width is narrow.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.206-209
• /
• 2006

In this paper, I try to measure the electrical characteristics of PV cell for lanterns with solar simulator and simulated with PC1D software. I keep my eye on the characteristics variation of PV cell as a temperature change. Therefore, I try to increase a temperature of controlled block from $10^{\circ}C$ to $50^[\circ}C$ while measuring the FV cell. As a result, A variation caused by voltage have an effect on the efficacy of PV cell. Hence it is an important variable when a designer plan to make a solar cell for lanterns.

• Tribology and Lubricants
• /
• v.11 no.2
• /
• pp.44-55
• /
• 1995

Frictional characteristics with the change of dynamic parameters, such as stiffness, inertia and damping, in the friction measurement at dry sliding surfaces were experimentally and theoretically investigated throughout the study. Dynamic frictional force and the variation in the normal load were mainly measured at the various conditions of system dynamic parameters with which stiffness in the normal direction, loading mechanisms and test materials were varied. For the normal load, mechanisms using both a dead weight and a pneumatic cylinder were applied, which resulted in change of the inertia and damping of the test rig. Test materials were steel, rosin and PTFE, which have different types of intrinsic frictional characteristics. Test results showed that frictional characteristics under different dynamic parameters could be different even though the operating variables were the same and also they could result in the variation in the normal load, which could consequently affect the wear mechanism.

• Health Policy and Management
• /
• v.11 no.3
• /
• pp.121-150
• /
• 2001

This study was conducted to investigate provider's behavior change after releasing the information on the Cesarean section rate. Claims data filed at the National Health Insurance Corporation was used for this analysis and the focus of this study was the change of cesarean rate after the public disclosure of information. Average rates of the year 1999 and 2000 were compared, on the institutional basis, and range and coefficient of variation were estimated. For the last decade, Cesarean section rate has been increased dramatically. Clinical or demographic factors could not adequately explain the increase. Instead, nonclinical factors, such as financial incentive, physician's convenience, practice characteristics, etc., were more significant in explaining the increasing rate. Providers' behavior was significantly affected by the public release of information: after the release, average rate was decreased by 10.2%, and variations were also decreased. In particular, the extent of decrease was explained mainly by nonclinical factor rather than clinical ones. The results suggest that disseminating practice information to providers and consumers could contribute to reducing unnecessary medical service.

• Journal of Environmental Science International
• /
• v.22 no.5
• /
• pp.625-638
• /
• 2013

Recently, the occurrences of droughts have been increased because of global warming and climate change. Water resources that mostly rely on groundwater are particularly vulnerable to the impact of precipitation variation, one of the major elements of climate change, are very sensitive to changes in the seasonal distribution as well as the average annual change in the viewpoint of agricultural activity. In this study, the status of drought for the present and future on Jeju Island which entirely rely on groundwater using SPI and PDSI were analyzed considering regional distribution of crops in terms of land use and fluctuation of water demand. The results showed that the precipitation distribution in Jeju Island is changed in intensity as well as seasonal variation of extreme events and the amount increase of precipitation during the dry season in the spring and fall indicated that agricultural water demand and supply policies would be considered by regional characteristics, especially the western region with largest market garden crops. Regarding the simulated future drought, the drought would be mitigated in the SPI method because of considering total rainfall only excluding intensity variation, while more intensified in the PDSI because it considers the evapotranspiration as well as rainfall as time passed. Moreover, the drought in the northern and western regions is getting worse than in the southern region so that the establishment of regional customized policies for water supply in Jeju Island is needed.