• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.141-148
• /
• 2012

The power system of leisure ship has a character of stand-alone type, so it continuously checks the usable power. Especially, the leisure ship using renewable energy needs to adjust the power consumption of loads according to the usable power. Also, the important loads of leisure ship are different by operation mode. However, current power management system doesnot consider such character. This paper studied load management system of the SPMS(Smart Power Management System) and composed using the smart plug. The SPMS controls the loads depending on a user's pattern and character through variable priority number control. This control algorithm was verified through simulation of assumed user and situation using LabVIEW.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.2
• /
• pp.121-128
• /
• 2018

This work proposes a simple control method of a buck-type active power decoupling circuit that can minimize the ripple values in the dc link voltage. The proposed method utilizes a simplified duty calculation method and an optimal compensation gain tracking algorithm with variable-step approach. Thus, the dc link voltage ripple can be effectively reduced through the proposed method along with rapid response in tracking the optimum compensation gain. Moreover, the proposed method has better dynamic responses in the load fluctuation or abnormal situation. MATLAB/Simulink simulation and hardware-in-the-loop-simulation(HILS)-based experimental results are presented to validate the effectiveness of the proposed control method.

• Steel and Composite Structures
• /
• v.11 no.6
• /
• pp.505-524
• /
• 2011

Steel girder web panels have been subjected in recent decades, to a number of experimental and numerical studies but the mechanisms that regulate the behaviour of the panels composed by two subpanels with different thickness were not deeply studied. Furthermore specific design rules regarding the estimation of the buckling coefficient for panels with variable thickness are not included in the codes even if this is a common situation particularly for steel bridge girders with beams having significant height. In this framework,this work aims to investigate buckling behaviour of steel beams with webs composed of panels with different thicknesses subjected to both in-plane axial compression and bending moment and gives some simplified equations for the estimation of the buckling coefficient.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.3
• /
• pp.78-84
• /
• 2002

This research is basically deals with an inventory distribution system with several regional sides branches. Under the continuous review policy, each sales branch places an order to its supplier whenever on hand plus on order inventory falls on the order point, and the order quantity is received after elapsing a certain lead time. This research first shows the method how to apply the product with low lever of demand into the continuous review policy. For the application, we use an order level as the maximum level of inventory during an order cycle. Also we analyze the lost sales case as a customer behavior. Further we use variable demands and variable lead times for more realistic situation. Based on the above circumstances, the research mainly discusses those methods to decide the optimal order level, order point, and order quantity for each sales branch which guarantees the system wide goal level of service, while keeping the minimum level of the system wide total inventory.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.2
• /
• pp.215-233
• /
• 2007

Even though the ad hoc Shewhart methods remain controversial due to various mathematical flaws, there is little disagreement among researchers and practitioners when a set of process data has a skewness distribution. In the context and language of process control, the error related to the process data shows that time to signal increases when a control parameter shifts to a skewness direction. In real-world industrial settings, however, quality practitioners often need to consider a skewness distribution. To address this situation, we developed an enhanced design method to utilize advantages of the traditional attribute control chart and to overcome its associated shortcomings. The proposed design method minimizes bias, i.e., an average time to signal for the shift of process from the target value (ATS) curve, as well as it applies a variable sampling interval (VSI) method to an attribute control chart for detecting a process shift efficiently. The results of the factorial experiment obtained by various parameter circumstances show that the VSI c control chart using nearly unbiased ATS design provides the smallest decreasing rate in ATS among other charts for all experimental cases.

• Journal of Families and Better Life
• /
• v.2 no.1
• /
• pp.79-92
• /
• 1984

The purpose of this study is to identify family stress and to specify family stress and socio-psychological resources which are associated variable. For the evidence of this topic, research was conducted on 258 married persons dwelling in seoul. The questionnare was composed of Family Stressor Inventory referred by McCubbin's FILE(1981) and Sarason's LES(1979) and Socio-Psychological Family Resources Inventory referred by McCubbin's FIRM(1983). This study offers to us that family income significantly has positive correlation with socio-psychological family resources and family income is potential variable which intensifies family tension or burden. This study touched only some variables, moreover, this is only a starting-point of family stress study in Korea. So further studies would consider latent variables, process, limited situation, family interaction pattern, family orientation, etc., and subjective variables would be reflected.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.266-268
• /
• 2003

This paper proposes the Fault Location Estimation Algorithm in the parallel transmission lines. These algorithm uses a variable data window method based on least square error method to estimate fault impedance quickly. And it selects the optimal equation according to the operation situation and usable fault data for minimizing the fault estimation error effected by the zero sequence mutual coupling. After simulation result, we can see that these algorithm estimates fault location more rapidly and exactly.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.1
• /
• pp.1-11
• /
• 1995

A numerical shallow water wave deformation model to solve unsteady mild slope equation was develope(1. The energy equation of Izumiya and Horikawa(1984) for wave breaking and bottom friction was incorporated to estimate more realistically energy damping resulted from wave breaking and reflection. A numerical scheme for variable grid spacings was also introduced to complement the defect of unsteady mild slope equation limiting the grid spacings. This model was tested and compared with the existing analytic solutions and physical modelings, and applied to a practical situation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.5
• /
• pp.259-267
• /
• 2019

This paper proposes a structure of a variable impedance control system based on sensor-less external force estimator of industrial manipulators for cyber physical production systems (CPPS). To implement CPPS, a feedback system is constructed by using the robot operating system (ROS) and an external force estimator which is designed to measure the external force applied to the manipulator without a force sensor. Based on the robot dynamics, the robot-human cooperating system for the cyber physics production system is implemented through a controller that changes the impedance characteristics of the manipulator according to the situation using the external force estimator. Simulation and experimental results verify the effectiveness of the proposed control system.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.2 no.2
• /
• pp.39-45
• /
• 2019

The purpose of this study is to solve the problem of revision or abbreviation of questionnaires based on the previous studies suggested by many existing empirical studies. In addition, this study aims to provide the theoretical basis of the research method which has been variously approached since it presents the methodology that can directly measure the research object. For this purpose, this study proposed a more elaborate analysis method using the differences in perception of individuals who are interested in cognitive research. Specifically, the perception gap(D) can be used as an independent variable, a dependent variable, and a moderating variable. And this study suggested an effective research approach using the measurement of perception difference. The difference of perception suggested that it can be used as a measure to overcome the limitations of existing researches used it as independent variables or mediating variables that measure only one factor of expectation and performance or importance and satisfaction. In addition, it is highly likely that various analyzes on the perception differences, which are the result of measuring target factors for the same person, will be quite effective in the situation where follow-up of respondents is difficult. This study is expected to overcome various limitations reported by empirical studies such as scale utilization problem and follow-up survey difficulty. In future research, it was expected that the limitation of the factor derivation process in the research approach could be complemented by web crawling and text mining of big data analysis.