• 한국초전도ㆍ저온공학회논문지
• /
• 제23권4호
• /
• pp.35-38
• /
• 2021

Conventional direct current (DC) rotating machines are usually used for crane and press machine using high torque in metal and steel industries, because of a constant output power along variable rotating speed. A general DC motor with permanent field magnets could not increase a magnetic flux density at a gap between armature coils and field magnets. However, a superconducting DC motor has field magnets composed with high temperature superconducting (HTS) coils and it could increase the magnetic flux density at the gap to over 10 times than those of a general DC motor by control the excitation current into HTS coils. The superconducting DC motor could be operated with extremely high torque and constant output power at a low rotational speed. In this paper, a 500 W superconducting DC rotating machine was conceptually designed with a LN₂ (Liquid Nitrogen) cooling method and the operation characteristics results of HTS field magnets were presented. The two no-insulation HTS magnets for a 500 W superconducting DC rotating machine were fabricated. The excitation current for the HTS magnets could be controlled from 0 to 40 A. This test results will be available to design large-sized HTS magnets for a number of hundred kW class superconducting DC rotating machine under LN₂ cooling system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.990-992
• /
• 2002

30kW electrical power conversion system is delveloped for the variable speed wind turbine system. In the wind energy conversion system(WECS) a synchronous generator with field current excitation converts the mechanical energy into electrical energy. As the voltage and frequency of generator output vary according to the wind speed, a dc/dc boosting chopper is utilized to maintain constant dc link voltage. Grid connection type PWM inverter supply currents into the utility line by regulating the dc link voltage. The active power is controlled by q-axis current which the reactive power can be controlled by d-axis current reference change. The phase angle of utility voltage is detected using s/w PLL(Phased Locked Loop) in d-q synchronous reference frame. This scheme gives a low cost power solution for variable speed WECS.

• 대한전기학회논문지
• /
• 제39권6호
• /
• pp.545-556
• /
• 1990

A design method of a current source using 12-pulse phase-controlled rectifier (PCR) is presented. The critical inductance of the 12-pulse PCR is derived and it is shown that the critical inductance can be reduced using a current source. The control circuit of the 12-pulse PCR with an inner fast dynamic loop is proposed to give the frequency synchronism and to reduce the subharmonics due to the unbalance of the transformer of the power line. This circuit is analyzed and its dynamic loop is optimized. The optimal constant PIMF (proportional, integral and measurable variable feedback, and feedforware) controller is also designed using the time-weighted quadratic performance index. It is shown via experimental results that the proposed design method gives high dynamic and static performance of the current source using the 12-pulse PCR.

• 전력전자학회논문지
• /
• 제9권2호
• /
• pp.105-111
• /
• 2004

본 논문에서는 온도나 습도 등 주변 환경변화와 무관하게 항상 최적의 레이저 프리터의 출력특성을 유지하기 위한 OPC(Organic Photo Conductor)용 고압 전류형 전원특성에 관한 논문이다. 제안된 제어방식은 기존의 정전압 제어방식이 가지는 단점인 온도나 습도 및 OPC의 분포저항 변화에 따른 출력전류 변동으로 OPC 표면에 일정한 전위를 형성하는 것이 용이하지 않은 단점을 개선하고, 주변환경 변화요인을 프린터 주제어기에서 감지하여 최적의 출력전류 기준신호를 출력하고, 이 기준신호에 따라 최종 출력전류가 제어되어 일정한 화상상태가 유지되도록 제어하는 제어방식으로 실험을 통하여 제안된 제어방식의 타당성을 검증하였다.

• 전기의세계
• /
• 제30권8호
• /
• pp.501-508
• /
• 1981

A novel and simple method of designing the current feedback loop for the velocity controller of an armature controlled dc servo motor is presented. Instead of constructing the usual tight current feedback loop, a loose current feedback loop is suggested in this paper. More specifically, the armature current is not limited to a fixed constant value, but instead the upper bound value is allowed to be variable along with the present motor speed. The control system designed in this manner shows that the motor under control is robust to a wide range of loading conditions and yields a more rapid transient characteristics which is verified experimentally by applying the method in the design of the controller for an Industrial robot.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.647-657
• /
• 2011

The present paper proposes a sliding mode control with fixed switching frequency for three-phase three-leg voltage source inverter based four-wire shunt active power filter. The aim is to improve phase current waveform, neutral current mitigation, and reactive power compensation in electric power distribution system. The performed sliding mode for active filter current control is formulated using elementary differential geometry. The discrete control vector is deduced from the sliding surface accessibility using the Lyapunov stability. The problem of the switching frequency is addressed by considering hysteresis comparators for the switched signals generation. Through this method, a variable hysteresis band has been established as a function of the sliding mode equivalent control and a predefined switching frequency in order to keep this band constant. The proposed control has been verified with computer simulation which showed satisfactory results.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.532-540
• /
• 2014

It is necessary to measure the current of rotor for controlling the active and reactive power generated by the stator side of the doubly fed induction generator (DFIG) system. There are offset and scaling errors in the current measurement. The offset and scaling errors cause one and two times current ripples of slip frequency in the synchronous reference frame of vector control, respectively. This paper proposes a compensation method to reduce their ripples. The stator current is variable according to the wind force but the rotor current is almost constant. Therefore input of the rotor current is more useful for a compensation method. The proposed method adopts the synchronous d-axis current of the rotor as the input signal for compensation. The ripples of the measurement errors can be calculated by integrating the synchronous d-axis stator current. The calculated errors are added to the reference current of rotor as input of the current regulator, then the ripples are reduced. Experimental results show the effectiveness of the proposed method.

• 한국인터넷방송통신학회논문지
• /
• 제15권4호
• /
• pp.191-198
• /
• 2015

최근 에너지 절약과 친환경 조명에 대한 관심이 고조되면서 기존 광원보다 효율이 좋은 LED 조명에 대한 연구가 증가되고 있다. LED 조명은 타 조명에 비해 초절전, 친환경, 장수명으로 21세기에 적합한 조명이라고 할 수 있다. 본 연구의 목적은 기존의 LED 등기구 전원구동회로에 마이크로 컨트롤러 기반 볼트 레귤레이터를 이용한 전류 제어시스템을 장착하여 다양한 LED 등기구에 적합한 전류가변제어시스템을 개발하는 것이다. 이를 위해 가변저항과 보상저항을 이용하여 LED 순방향 전압값에 대한 영향이 최소화되도록 회로를 구성하여 안정적인 전원공급과 전류조정이 가능하도록 하는 전류가변제어시스템을 제안한다. 본 연구에서 제시한 마이크로 컨트롤러 기반 볼트 레귤레이터를 이용한 정전류 회로 및 이를 이용한 에너지 절감방법은 발광소자에 불필요한 발열을 최소화할 수 있고, 저항값을 세밀하게 조정할 수 있어 다양한 대용량 LED 등기구에 적용 가능하다. 본 연구는 궁극적으로 안정적인 전류 공급으로 LED 등기구의 신뢰성을 향상시킬 수 있을 것으로 기대된다.

• 융합신호처리학회논문지
• /
• 제4권2호
• /
• pp.61-69
• /
• 2003

본 논문에서는 반도체 소자의 DC 파라메터에 대한 특성을 검사하는 DC 파라메터 검사 시스템을 개발하였다. 개발된 시스템은 IBM-PC와 연결하기 위한 CPLD(Complex Programmable Logic Device)로 구현된 연결부와 ADC/DAC부, 전압원/전류원, 가변저항부, 측정부로 구성되어 있다. 제안된 시스템에서 정전압원과 정전류원은 하나의 회로로 설계하여 외부의 컴퓨터에서 주어지는 모드명령에 의해 선택되도록 하였으며, VHDL(VHSIC Hardware Description Language)을 사용하여 회로를 제어하고 신호를 변환하는 기능을 CPLD로 설계하였다. 제안된 시스템은 두 개의 채널을 가지고 있으며, VFCS(Voltage Force Current Sensing) 모드와 CFVS(Current Force Voltage Sensing) 모드로 동작할 수 있도록 하였다. 검사 전압의 범위는 0(V)-10(V)까지이고, 검사전류의 범위는 0[mA]-100[mA]까지로 다이오드를 사용하여 설계된 회로의 성능을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.148-150
• /
• 1996

This paper describes method of microstepping current control for linear pulse moor. The control method witch electrically subdivides 1 step of a LPM 125 micro step is realized using micro-step algorithm. The resolution of the system for microstepping is improved also by microstep control of driving current, which is followed by the increase of microstep subdivision coefficient, the precise position and velocity control of LPM can be realized and stabilization of the system is improved.