• 태양에너지
• /
• 제16권2호
• /
• pp.97-112
• /
• 1996

본 연구는 가정용 가스 보일러 순환펌프의 문제점 보완은 물론 펌프 외부에 설치되어 있는 3way valve를 하우징 내부에 부착한 3way valve 내장형 펌프 하우징을 개발하기 위한것이다. 기존 하우징이 부착된 canned type 순환펌프의 실험결과를 근거로 3way valve 내장형 하우징을 설계 제작하였으며 신형 하우징이 부착된 canned type 순환펌프의 성능실험 및 보일러 전체 시스템에서의 순환펌프 성능 실험을 실시하였다. 실험 결과 신형 3way valve 내장형 하우징을 부착할경우 펌프의 총양정은 평균 $1{\sim}1.7m$, 펌프 효율은 약 25%정도 높게 나타났으며 축동력은 약 4W 감소하였다. 특히 하우징의 중량은 1.4kg에서 0.4kg으로 줄어들었고 제작비는 개당 약 5000원정도 절감할수 있었으며 조립공정의 단축으로 생산비용은 보일러 1대당 약 2만원 정도의 원가절감을 예상할수 있다.

• 대한기계학회논문집A
• /
• 제30권1호
• /
• pp.52-59
• /
• 2006

The vibration of hydraulic piston pumps is induced by the periodically changing cylinder chamber pressure whose waveform is significantly influenced by valve plate geometry. In this study, the force input to the housing of a bent-axis type hydraulic piston pump was computed by deriving the dynamic equations of its piston and cylinder barrel. The vibration intensity of the pump was represented by the acceleration amplitude of its housing. In order to comparatively evaluate the influence of valve plate geometry on the vibration of pump housing, two different types of valve plate were tested. The computed results showed good agreement with the experimental data, indicating that the vibration acceleration of pump housing is rather dependent on the variation amplitude of balance coefficient than the changing slope or overshoot of cylinder chamber pressure. It was also confirmed that the design effect of valve plates could be directly examined out by monitoring the vibration acceleration of pump housing.

• 한국산업융합학회 논문집
• /
• 제9권2호
• /
• pp.105-110
• /
• 2006

Valve-housing parts in car steering system is a part of steering system and then take charge of the main functions for car steering system to reduce driver's handling-force. Recently it is still not developed reliable casting for many cars, so it produce as a Gravity casting which is more than triple for producing cost in Korea. In this research, we had conducted that 350t aluminum die casting is superior to mechanical property from established over 500t or not for Valve-housing, a parts of steering system which were produced as a cast-iron product and the most suitable conditions to extruding as die casting.

• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.27-35
• /
• 2006

Al used in automobiles is mostly material, and according to the innovation of technique is in rapid development. Al die casting is an important field as today's trend of lightweight on automobiles. Valve housing in steering system improves driver's controling. The valve housing which is widely reliable to the most automobiles are developed this moment in our automobile industry. Therefore, they are produced by casting method which cost three times or even more expensive in production. If valve housing which is a part of steering system is produced by gravity casting, the space for manufacturing equipment will be increased, and more time and workers would be brought into service. For such reason, die casting would replace gravity casting in order to minimize cost of time, manpower, and working space. This study is the forming analysis of the 2 cavity die casting for automobile valve housing.

• 한국산업융합학회 논문집
• /
• 제9권1호
• /
• pp.61-66
• /
• 2006

In perspective of saving natural resource and energy, today's automobiles are in process of regenerating by smaller and lighter. In order to achieve the sufficiency on the consumption of the fuel, new mechanism and new assembly are required. Therefore the expectations on the new materials are very high. Especially, AI materials are widely used to reduce the weight. AI that is used in automobiles is mostly casting material, and according to the innovation of technique is in rapid development. AI Die casting is an important field as today's trend of lightweight on automobiles. One of the parts in steering system, Valve Housing plays a role of reduce the operating effort of drivers. Unfortunately, the Valve Housing which is widely reliable to the most automobiles are not developed at this moment in our automobile industry. Therefore, they are produced by casting method which cost three times or even more expensive in production. If Valve Housing, which is a part of steering system is produced by Gravity Casting, the space that manufacturing equipment will be increased, and more time and workers would be brought into service. For such reason, Die Casting would replace Gravity Casting in order to minimize cost of time, manpower, and working space.

• 한국산업융합학회 논문집
• /
• 제9권4호
• /
• pp.301-308
• /
• 2006

Today's automobiles are changing into miniaturization and light weight for saving natural resources and energies. In order to raise the sufficiency of fuel consumption, new mechanism and components are required. Therefore, the expectations on the new materials are very high. Especially, Al materials are widely used to reduce the motors weight. Al using in automobiles is mostly casting material, and the material is developing rapidly in step with technical innovation. Al die casting has become an important field, as we are turning today's motor into light weight. One of the parts in steering system, valve housing, plays a role to reduce the operating effort of drivers. If valve housing being a part of steering system is produced by gravity casting, the space that manufacturing equipments are installed will be increased, and more energies and workers will be needed.

• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.155-158
• /
• 2003

자동차 부품 T/P housing과 valve에 사용되는 S20C 계열의 강에 Mn과 V 첨가에 따른 냉각속도의 영향과 조직의 거동, 단조 시 변형속도와 경도 변화를 조사하였다 냉각속도를 증가하면 오스테나이트 결정립에 의한 변태 지연에 의해 변태개시 온도가 저하되었다 미소한 Mn 함량의 증가는 냉각속도를 민감하게 하여 변태개시 온도를 감소 시켜 결정립 미세화를 일으킨다. 또한, 성형압이 클수록 내부보다 표면이 큰 경도값이 나타났다.

• 유공압시스템학회논문집
• /
• 제7권4호
• /
• pp.44-49
• /
• 2010

This paper represents solenoid design of control valve for incline angle control in variable compressor. Some theoretical and numerical analysis were performed to analyse solenoid and compared with experimental results. Maxwell program was used for numerical analysis. Through redesigns of housing body, plunger, core, and disk in control valve, the needed force was gotten. Reduction of core groove and housing body air-gap had a large influence on magnetic force. But increasing of disk thickness had little effect on magnetic force. Control valve efficiency could be improved through solenoid redesign.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1334-1338
• /
• 2005

A limit switch box is used for an indicator of a valve actuator. This device indicates an opening and closing of a valve or a throttle in the valve actuator. In a ship, equipments require safety and robustness because of a rough environment and a specific condition during a voyage. However, the limit switch box has been used in an indoor environment generally. This study developed a new limit switch box which can be used at an outdoor environment. This study designed the new limit switch box. The housing of the limit switch box was made by an aluminum die cast method with surface painting after anodizing or chromate coating. In order to evaluate the endurance of the housing, the endurance tests against salt water have been conducted. Experiment results showed that the proposed device provides a reliable performance against salt water.

• 한국소음진동공학회논문집
• /
• 제19권8호
• /
• pp.843-849
• /
• 2009

The reliable operation of a swing check valve in the main feed water system of a power plant is most essential for successful shout-down process. A failure to close the valve at proper time often leads to the instability of the main feed water system, or even to an emergency stop of the power plant. In reality it is a very difficult task to monitor the behavior of a swing check valve. Furthermore it is impossible to see the motion of the valve. In this work two measurements were carried out simultaneously to determine the precise valve closure time. The dynamic pressure measurements were made at the inlet and outlet regions of the swing check valve. The transient vibration of the valve housing in the direction of water flow was also measured, which enabled the measurement of the transient vibration of the valve housing near valve closure. By comparing the results produced from these measurements the precise valve closure time could be determined. By carrying out order tracking technique using the dynamic pressure signals and pump rpm signal, the complicated dynamic problems inside the main feed water system can be more easily dealt with. This measurement scheme might be implemented in a power plant on a real-time basis without much difficulty. If this could be implemented, valuable information essential for shut-down operations can readily be passed on to the main control room. The feasibility of this implementation was demonstrated by this experimental work.