• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.579-593
• /
• 2010

Low-power radio frequency (RF) chip transceiver technology and the associated structural health monitoring platforms have matured recently to enable high-rate, lossless transmission of measurement data across large-scale sensor networks. The intrinsic value of these advanced capabilities is the allowance for high-quality, rapid operational modal analysis of in-service structures using distributed accelerometers to experimentally characterize the dynamic response. From the analysis afforded through these dynamic data sets, structural identification techniques can then be utilized to develop a well calibrated finite element (FE) model of the structure for baseline development, extended analytical structural evaluation, and load response assessment. This paper presents a case study in which operational modal analysis is performed on a three-span prestressed reinforced concrete bridge using a wireless sensor network. The low-power wireless platform deployed supported a high-rate, lossless transmission protocol enabling real-time remote acquisition of the vibration response as recorded by twenty-nine accelerometers at a 256 Sps sampling rate. Several instrumentation layouts were utilized to assess the global multi-span response using a stationary sensor array as well as the spatially refined response of a single span using roving sensors and reference-based techniques. Subsequent structural identification using FE modeling and iterative updating through comparison with the experimental analysis is then documented to demonstrate the inherent value in dynamic response measurement across structural systems using high-rate wireless sensor networks.

• Journal of Welding and Joining
• /
• v.29 no.3
• /
• pp.76-81
• /
• 2011

Recently, the structural failures due to fatigue occur frequently with the increase of size of ships and offshore structures. In this respect, the assessment of fatigue life and the residual strength are very important. Currently, the smart materials technology has demonstrated a variety of possibilities for a diagnosis of structural strength and structural health condition for large structures. The benefits and feature of the MFC sensor are more flexible, durable and reliable than conventional smart material. In this study, Micro Fiber Composite (MFC) sensor for the measurement of stress intensity factor (SIF) of two dimensional cracks induced in a structure is developed. Two MFC sensors are placed in the vicinity of the crack tip close to each other with the crack tip in between them. The SIFs of Mode I($K_I$) as well as of Mode II($K_{II}$) based on the piezoelectric constitutive law and fracture mechanics are calculated. In this study, the SIF values measured by MFC sensors are compared with the theoretical results and measured value.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.707-714
• /
• 2024

Different degrees of natural radioactivity found in quartz can have negative consequences on health. Quartz vein along the investigated Abu Ramad area, Egypt, had its natural radioactivity assessed. The HPGe spectrometer was used to determine the role played by the radionuclides ²³⁸U, ²³²Th, and ⁴⁰K in the gamma radiation that was emitted, and the results showed that these concentrations are 484.64 ± 288.4, 36.8 ± 13.1 and 772.2 ± 134.6 Bq kg^-1 were higher than the corresponding reported global limits of 33, 45, and 412 Bq kg^-1 for each radionuclide (²³⁸U, ²³²Th, and ⁴⁰K). Among the radiological hazard parameters, the excess lifetime cancer risk (ELCR) is estimated and it's mean value of ELCR (1.2) is higher than the permissible limit of 0.00029. The relationship between the radionuclides and the associated radiological hazard characteristics was investigated based on multivariate statistical methods including Pearson correlation, principal component analysis (PCA), and hierarchical cluster analysis (HCA). According to statistical research, the radioactive risk of quartz is primarily caused by the ²³⁸U, ²³²Thand ⁴⁰K. Finally, applying quartz to building materials would pose a significant risk to the public.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.5
• /
• pp.711-720
• /
• 2019

Objective: This study was conducted to assess the effect of potassium humate and enzymes (Xylanase+Amylase+Protease) inclusion in diets on carcass characteristics, meat quality and fatty acid profiles of broilers fed canola-based diets. Methods: Two hundred and twenty broilers randomly allotted to 5 dietary treatments: the control (commercial broiler diet); CM (17.5% canola meal inclusion); CMEnz (17.5% CM inclusion+0.3 g/kg Axtra XAP); CMPh (17.5% CM inclusion+1.5% Potassium Humate, PH); and CMEnzPh (17.5% CM inclusion+1.5% PH+0.3 g/kg Axtra XAP) were slaughtered at day 42 for assessment of carcass and meat quality parameters. Results: Diet had no effect on carcass traits apart from breast muscle weight and breast muscle index. The highest breast muscle weight was observed in broilers fed CMEnz ($487.6{\pm}17.5g$) followed by those fed the control diet ($474.37{\pm}17.5g$). Diet also had no significant dietary effect on pH, temperature, drip loss and shear force values of the breast muscle. However, diet significantly affected meat colour and water-holding capacity. Broilers in the control and CMPh groups ($52.94{\pm}0.67$ and $52.91{\pm}0.67$) had the highest (p<0.05) values for lightness ($L^*$), whilst those fed CMEnzPh had the lowest value ($47.94{\pm}0.67$). In contrast, CM group had the lowest (p<0.05) value for redness ($a^*$) with CMEnzPh group having the highest values. The proportion of polyunsaturated fatty acids (PUFAs), n-6 and n-3 fatty acids and the PUFA/saturated fatty acid ratio were increased in CM-based diets containing enzymes and humic acid. Conclusion: It can, therefore, be concluded that CM can be included in broiler diets in the presence of enzymes and humic acid with positive effects on meat quality and important fatty acids that are beneficial to the health of consumers.

• Journal of radiological science and technology
• /
• v.44 no.5
• /
• pp.489-494
• /
• 2021

In this study, radioactivity quantitative analysis was performed on radon contained in cigarette, and the effective dose was calculated using the result value to determine the amount of exposure caused by smoking. A total of 5 types of cigarettes were sampled. Cigarette smoke was collected by using activated carbon, and tobacco were measured by homogenizing for quantitative analysis. For each sample, Bi-214 and Pb-214 were subjected to gamma nuclide analysis to observe the uranium-based radioactive material contained in cigarette, and a measurement time of 30,000 seconds was set for the sample based on the results of previous studies. As a result of measuring the radioactivity of tobacco, a maximum of 0.715 Bq/kg was derived, and in the case of cigarette smoke measured using activated carbon, a maximum of 3.652 Bq/kg was derived. Using this measurement, the average effective dose to the lungs is 0.938 mSv/y, and it was found that there is a possibility of receiving exposure up to 1.099 mSv/y depending on the type of tobacco. It was found that the exposure dose due to cigarette occupies a large proportion of the annual effective dose limit for the general public. Therefore, more diverse studies on radioactive substances in cigarette are needed, and measures to monitor and reduce the incidental exposure to radon should be established.

• 재활복지
• /
• v.17 no.4
• /
• pp.401-420
• /
• 2013

This study was performed to investigate the impact of the Neurocognitive Rehabilitation Therapy on the upper limb function recovery of patients with stroke and their abilities to perform daily activities and to provide basic data for a long-term treatment. A total of 30 patients with hemiplegia that occurred due to stroke were recruited as subjects of the present study, and 15 patients were randomly assigned to a Neurocognitive Rehabilitation Therapy group and a conventional treatment group, respectively. And, tests were performed over four weeks, five times a week, and 30 minutes a session. Manual Function Test(MFT), Fugl-Meyer Assessment Scale(FMA), and Korean-Modified Bathel Index(K-MBI) were used to measure the degree of the functional recovery before and after the experiment. According to the data of this study, in the upper limb function test, the Neurocognitive Rehabilitation Therapy group showed significant increase of the measurement values of MFT and FMA(p <.05), and when the difference between the two groups were compared, the upper limb function showed a statistically significant difference. In the daily activity performance test, only the Neurocognitive Rehabilitation Therapy group showed a significant improvement of K-MBI value(p <.05). Based on the results of the present study, it was demonstrated that the Neurocognitive Rehabilitation Therapy was effective in enhancing the upper limb functions and daily activity performance of patients with stroke.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.6
• /
• pp.2917-2921
• /
• 2016

Background: To explore factors that influence quality of life (QOL) in patients receiving breast conserving therapy (BCT). Materials and Methods: In this sequential mixed methods study, 118 women from Songklanagarind Hospital were included. We used participants' characteristics, Body Image Scale (BIS), and Functional Assessment of Cancer Therapy with the Breast Cancer Subscale (FACT-B) for analysis. The BIS transformed into presence of body image disturbance (BID). Factors that influenced QOL were determined by stepwise multiple linear regression. Forty-one participants were selected for qualitative analysis. Our female researcher performed the semi-structured interviews with questions based on the symbolic interaction theory. Final codes were analysed using thematic analysis along with investigator triangulation methods. Results: Ninety percent had early stage breast cancer with post-completed BCT, for an average of 2.7 years. The median BIS score and FACT-B score were 2 (IQR=10) and 130 (IQR=39). In the regression analysis, an age of more than 50 years and BID were significant factors. As for the value of conserved breasts, two themes emerged: a conserved breast is an essential part of a participant's life and also the representation of her womanhood; the importance of a breast is related to age. Conclusions: Body image influenced QOL in post BCT participants. The conserved breasts also lead to positive and better impact on their body image as an essential part of their life.

• Journal of dental hygiene science
• /
• v.16 no.6
• /
• pp.464-471
• /
• 2016

The purpose of this study was to provide information on the labeling of nutritional components on beverages to aid in nutrition education and oral health promotion. The study was conducted to evaluate nutritional effects and risk factors associated with the consumption of different beverages with respect to oral health. A total of 52 products from seven different types of beverages were analyzed for their nutrient content, sugar content, and pH. The sugar content per serving size, based on the nutrition labeling of beverages, was highest for the milk beverages, at 26.6 g, and lowest for the teas, at 13.0 g. According to the recommendation of the World Health Organization (WHO), beverages should contain less than 10% (50 g) total sugars. Our assessment revealed that total sugars in and carbonated beverages were 53.2% and 50.0% of daily value, respectively. Therefore, the milk and carbonated beverages contained more than 50% sugars per serving size, exceeding the recommendation of WHO. The pH of the beverages, from the most acidic to the least acidic were: carbonated beverages, pH 3.0; fruit and vegetable beverages, pH 3.1; mixed beverages, pH 3.6; fruit and vegetable juices, pH 3.7; teas, pH 4.7; coffees, pH 6.6; and milk beverages, pH 6.8. The intake of acidic and sweetened beverages could potentially cause dental caries and erosion. Therefore, the results of this study could be used by oral health care professionals to counsel their patients by providing relevant information on the possibility of oral disease caused by consumption of commercial beverages.

• Clean Technology
• /
• v.24 no.3
• /
• pp.166-174
• /
• 2018

Since particulate matter has high impacts on human health and everyday life, the dual fuel systems utilizing diesel and compressed natural gas have been developed to improve the environmental performance of diesel vehicles. The objective of this study is to estimate the economic feasibility of the dual fuel system based on real operating data of dual fuel buses and diesel buses. The system is economically feasible if the annual mileage of the dual bus is higher than 30,000 km, or if the unit fuel price of diesel is higher than that of CNG by 408 won. The uncertainty analysis results show that the economic feasibility of the system is probabilistically high, regardless of the variability of input data such as mileage and unit prices for the fuels. The sensitivity analysis results show that diesel and CNG prices are the highest contributor to the net present value of the system. Based on these results, economic incentives are suggested to disseminate the systems. This study would provide valuable economic information for bus business industry and policy maker to help make decisions for applying and disseminating the dual fuel systems to mitigate particulate matter problems.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.4
• /
• pp.382-392
• /
• 2018

Objective: Allergic diseases such as asthma due to fungal exposure in houses have increased, and proper management is urgent. Mold can grow in the air, floor, walls, and other areas according to environmental conditions, and there are many limitations to the conventional methodology for examining fungal exposure. For this reason, the degree of fungal contamination is being evaluated by ERMI (Environmental Relative Moldiness Index), a quantitative analysis method proposed by the EPA. In this study, we compared ERMI values between water-damaged dwellings and non-damaged ones to evaluate the effectiveness of Korean ERMI values. We also explored the association of ERMI values with the level of airborne mold and characteristics of dwellings. Methods: Floor dust was collected after installing a Dustream collector on the suction port of a vacuum cleaner. The collected samples were filtered to remove only 5 mg of dust, and DNA was extracted using the FastDNA SPIN KIT protocol. Results: The ERMI values were found to be 19.6 (-6.9-58.8) for flooded houses, 7.5 (-29.2-48.3) for leaks/condensation, and 0.8 (-29.2-37.9) for non-damaged dwellings. The airborne concentration of mold for flooded, leakage or condensed, and non-damaged houses were $684CFU/m^3$, $566CFU/m^3$, and $378CFU/m^3$, respectively. The correlation between ERMI values and the levels of airborne mold was low (R = 0.038), but a weakly significant association of the ERMI values with the concentration of particulate matter ($PM_{10}$) was observed as well(R=0.231,P<0.05). Conclusions: Our findings show that the reference value using ERMI can be used to distinguish water-damaged and non-damaged dwellings. It is believed that ERMI values could be a promising tool for assessing long-term fungal exposure in dwellings.