• Computers and Concrete
• /
• v.1 no.4
• /
• pp.433-455
• /
• 2004

The paper presents results of FE-calculations on shear localizations in quasi-brittle materials during both an uniaxial plane strain compression and uniaxial plane strain extension. An elasto-plastic model with a linear Drucker-Prager type criterion using isotropic hardening and softening and non-associated flow rule was used. A non-local extension was applied in a softening regime to capture realistically shear localization and to obtain a well-posed boundary value problem. A characteristic length was incorporated via a weighting function. Attention was focused on the effect of mesh size, mesh alignment, non-local parameter and imperfections on the thickness and inclination of shear localization. Different methods to calculate plastic strain rates were carefully discussed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.55-58
• /
• 2007

To check the feasibility of SMART (Steam Methane Advanced Reforming Technology)system, an experimental investigation was conducted. A fluidized bed reactor of diameter 0.052 m was operated cyclically up to the $10^{th}$ cycle, alternating between reforming and regeneration conditions. FCR-4 catalyst was used as the reforming catalyst and calcined limestone (domestic, from Danyang) was used as the $CO_2$ absorbent. Hydrogen concentration of 98.2% on a dry basis was reached at $650^{\circ}C$ for the first cycle. This value is much higher than $H_2$ concentration of 73.6% in the reformer of conventional SMR (steam methane reforming) system. However, the hydrogen concentration decreased because the $CO_2$ capture capacity decreased as the number of cycles increased.

• Journal of Advanced Marine Engineering and Technology
• /
• v.12 no.3
• /
• pp.43-56
• /
• 1988

The image processing system consisted of the microcomputer IBM PC-XT and the graphic board (16 gray level and $640{\times}400$ pixels resolution) has been proposed, and the image processing softwares programmed in the BASIC and in the assembler language have been developed. The programs are consisted of the main menu and the sub menu, that have contained the subroutine for the capture for image data, the determination of region, the histogram, the change of value, the montage, the skeleton, the mask, the moving, the zoom, the disk access and the print. For the application, the photoelastic fringe data have been captured and analyzed. It was seen that the programs are available for the image processing.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.58-66
• /
• 2008

In this paper, we have proposed a method and procedure which can find out the unknown network protocol. Although it seems to be difficult to identify the protocol, we can find out the rule in the packet according to the method we have proposed. We have to recognize functions of the system and make the list of events first. Then we capture the network packet whenever the event are occurred. The captured packets are examined by means of the method that is finding repeated parts, changed parts according to the input value, fixed parts and changed parts according to regular rules. Finally we make the test program to verify the protocol. We applied this method and procedure to upgrade Electronic Warfare Test System which is operated by ADD. We have briefly described the redesign of control and analysis software for Electronic Warfare Test System

• Journal of Mechanical Science and Technology
• /
• v.20 no.3
• /
• pp.297-309
• /
• 2006

This paper deals with a novel structure for single-cell characterization which makes use of bimorph micro thermal actuators combined with electrical sensor device and integrated microfluidic channel. The goal for this device is to capture and characterize individual biocell. Quantitative and qualitative characteristics of bimorph thermal actuator were analyzed with finite element analysis methods. Furthermore, optimization for the dimension of cantilevers and integrated parallel probe systems with microfluidic channels is able to be realized through the virtual simulation for actuation and the practical fabrication of prototype of probes. The experimental value of probe deflection was in accordance with the simulated one.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3C
• /
• pp.257-267
• /
• 2009

This paper presents a training method for neural networks and the employment of MSE (mean scare error) values as the basis of a decision regarding the identity claim of a speaker in a recurrent neural networks based speaker verification system. Recurrent neural networks (RNNs) are employed to capture temporally dynamic characteristics of speech signal. In the process of supervised learning for RNNs, target outputs are automatically generated and the generated target outputs are made to represent the temporal variation of input speech sounds. To increase the capability of discriminating between the true speaker and an impostor, a discriminative training method for RNNs is presented. This paper shows the use and the effectiveness of the MSE value, which is obtained from the Euclidean distance between the target outputs and the outputs of networks for test speech sounds of a speaker, as the basis of speaker verification. In terms of equal error rates, results of experiments, which have been performed using the Korean speech database, show that the proposed speaker verification system exhibits better performance than a conventional hidden Markov model based speaker verification system.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.337-339
• /
• 2012

This study investigates the combustion and heat transfer characteristics of a 100MWe pulverized coal boiler retrofitted for demonstration of oxy-coal combustion. By computational fluid dynamics (CFD), the flame temperature and wall heat flux were compared for air-fuel and oxy-fuel combustion with different $O_2$ concentration in the oxidizers. It was found that the oxy-fuel combustion requires an $O_2$ concentration higher than 27 vol.% for the boiler to achieve the similar value of wall heat flux with air-fuel combustion.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.7
• /
• pp.299-306
• /
• 2003

Doubly-Fed Induction Generator(DFIG) is adequate to maximize the energy capture from wind energy, whereby the turbine speed can be adjusted to a speed, at which a rated tip speed ratio be kept. In this paper, a power analysis for DFIG and its characteristics of power flow in grid-connected operation, are dealt with in speed range of super- and sub-synchronous region. In a test of the machine, whereby a doubly excited circuit configuration in stator as well as rotor with back to back PWM inverter have been equipped, a constant input torque is given and in that condition, power new in stator and rotor circuit have been measured and compared with theoretical value. Furthermore, the power factor in stator and rotor circuit have been examined.

• Journal of Korean Society for Quality Management
• /
• v.37 no.4
• /
• pp.1-9
• /
• 2009

Supplier selection process is one of the most important arenas of production and logistics management for many companies. This study explores the application of the analytic network process (ANP) approach for the evaluation of suppliers based on several different evaluation criteria. The ANP approach in this study is capable of providing priorities of suppliers that capture network relationships among several evaluation criteria which are not independent. Therefore this study provides value to practitioners by providing a generic model for supplier selection. In addition, for researchers, it demonstrates further research possibilities for more complex decision making problems using ANP.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.74-82
• /
• 2004

This paper proposes a fast zooming and focusing technique for implementing a real-time surveillance camera system which can capture a face image in less than 1 second. It determines the positions of zooming and focusing lenses using two-step algorithm. In the first step, it moves the zooming and focusing lenses simultaneously to the positions calculated using the lens equations for achieving the predetermined magnification. In the second step the focusing lens is adjusted so that it is positioned at the place where the focus measure is the maximum. The camera system implemented for the experiments has shown that the proposed algorithm spends about 0.56 second on average fur obtaining a focused image.