• 한국전통조경학회지
• /
• 제40권2호
• /
• pp.34-43
• /
• 2022

본 연구는 역사상 상호 지정학적·문화적 영향관계 속에서 발전해 온 중국과 베트남의 문화유산 특성을 비교한 결과 다음과 같은 결론을 얻었다. 첫째, 중국과 베트남의 문화유산 정의는 양국이 유사한 의미를 지닌다. 문화유산 분류의 경우 양국 모두 무형문화유산의 법적 개념을 유네스코를 통해 본격적으로 도입하게 되면서, 무형문화유산 진흥정책 측면에서 유사성을 지니고 있다. 둘째, 중국은 유형문화유산과 무형문화유산을 관리하는 법이 각각 따로 존재하는 반면, 베트남은 두 유형의 문화유산을 단일 법령에 의해 통합적으로 관리하고 있다. 베트남은 중국에 비해 문화유산 개념의 도입은 늦은 면이 있지만, 체계적인 측면에서는 높은 통합성을 보이고 있다. 셋째, 중국과 베트남의 유산은 모두 등급화가 나타나며, 이는 유산의 유형에 따라 다르게 적용된다. 지정방식은 양국이 수직적 구조를 가지고 단계를 높여가는 유사성을 지니고 있다. 이러한 단계적 검토를 통한 유산의 가치 복원 및 완전성의 보완으로 관광을 통한 유산 향유, 경제적 효과 창출을 통한 전국의 균형적 발전을 꾀하고 있다. 넷째, 문화유산 관리기구는 양국 모두 중앙정부의 관리기관이 존재하지만, 중국의 경우 베트남에 비해 지방정부의 권한이 높은 것으로 확인되었다. 또한, 유형문화유산과 무형문화유산을 통합적인 기관에서 관리하는 베트남과 달리 중국은 무형문화유산을 관장하는 기관이 별도로 존재하였다. 다섯째, 중국은 유산의 보호와 활용을 조화롭게 한 지속가능성에 초점을 맞추어 보존관리 정책을 수립하고 있다. 베트남은 협약의 내용과 정신을 문화유산, 특히 무형문화유산과 경제·사회 전반에 관련된 법률, 프로그램, 프로젝트에 통합하고 이를 발전시키기 위해 노력을 기울이고 있다. 그러나 아직은 선진국의 원조와 국제기구의 영향에 의존하고 있는 실정이다. 여섯째, 중국과 베트남은 유형문화유산 중심의 문화유산 보호정책에서 벗어나 현재는 근래 도입한 무형문화유산에 관심을 기울이고 있다. 또한, 문화유산을 통해 국민을 결집시키고 국가의 통일된 정책 목표를 달성하고자 한다. 양국은 무형문화유산을 지역 공동체나 지역을 보존하는 효율적 보존 수단으로 활용할 필요가 있다. 무형문화유산의 구성요소를 하나의 단위로 통합할 수 있는 각 주체별 문화유산 보존 네트워크를 구축하여 국민들의 향유 기반을 마련하여야 한다. 본 연구는 중국과 베트남의 문화유산 체제와 보존관리 현황에 주목해 비교한 연구의 단계로 한계를 지니며 유형별 문화유산 정책의 특성비교는 차후 연구과제로 남긴다.

• 청정기술
• /
• 제29권1호
• /
• pp.10-21
• /
• 2023

천연 고분자 이중 네트워크를 기반으로 하는 하이드로젤은 뛰어난 생체 적합성, 낮은 세포 독성, 높은 함수율을 가져 다양한 의학 분야 재료로서 우수한 성능을 가지며 생체 조직 내 표적 약물 전달 시스템에의 응용에도 많은 주목을 받고 있지만 상대적으로 약한 기계적 물성에 의한 한계를 가진다. 본 연구에서는 천연 고분자 산화 알지네이트(alginate di-aldehyde, ADA)와 젤라틴(gelatin)이 형성하는 이중 네트워크 기반의 하이드로젤을 합성하였으며 하이드로젤 내부의 기능기와 수소 결합을 할 수 있는 다량의 수산기(-OH) 기능기를 가지는 과분지 고분자(hyperbranched polyglycerol, HPG)를 0~25%의 범위로 조절하여 첨가하여 최종적으로 기계적 물성이 향상된 천연 고분자 기반 하이드로젤을 합성하였다. 또한, 자철석 나노 입자(Fe₃O₄ nanoparticles (NPs))를 하이드로젤 내부에 in-situ 방법으로 합성하여 자성이 부여된 천연고분자 하이드로젤의 제조 및 특성 분석을 진행하였다. 결과적으로 Fe₃O₄ NPs를 도입한 15% HPG 함량의 하이드로젤은 3.8 emu g^-1의 포화자화 값을 가지는 초상자성을 보였고, 변형률 67.4%에서 최대 압축 강도 1.1 MPa으로 높은 기계적 물성을 가졌다. 향상된 기계적 물성을 가지는 천연 고분자 기반의 초상자성 하이드로젤은 약물 전달 시스템 및 생체 재료에 매우 중요한 잠재적 용도가 있을 것으로 사료된다.

• 지능정보연구
• /
• 제29권2호
• /
• pp.101-114
• /
• 2023

유사시 종심 깊숙한 곳에서 적을 타격하는 임무를 수행하는 항공기의 경우 격추될 위험에 항시 노출되어 있다. 현대전의 핵심 전투력으로써 최첨단의 무기체계를 운용하는 공중근무 요원은 양성하는데 많은 시간과 노력, 국가 예산이 소요되며 그들이 가진 작전 능력과 군사기밀이 매우 중요하기에 공중근무 요원의 생환은 매우 중요한 문제이다. 따라서, 본 연구에서는 적지에서 비상탈출한 조난자가 장애물을 피해 목표지점까지 도피·탈출을 시행할 경로를 예측하는 경로 문제를 연구하였으며 이를 통해 비상탈출한 조난자의 무사 생환 가능성을 높이고자 하였다. 본 연구 주제와 관련된 기존 연구들은 경로 문제를 네트워크 기반 문제로 접근하여 TSP, VRP, Dijkstra 알고리즘 등으로 문제를 변형하여 최적화 기법으로 접근한 연구가 있었다. 본 연구에서는 동적 환경을 모델링 하기에 적합한 MDP(마코프 의사결정과정)를 적용하여 연구하였다. 또한 GIS를 이용하여 지형정보 데이터를 추출하여 활용함으로써 모형의 객관성을 높였으며, MDP의 보상구조를 설계하는 과정에서 기존 연구 대비 모형이 좀 더 현실성을 가질 수 있도록 보다 상세히 지형정보를 반영하였다. 본 연구에서는 조난자가 지형적 이점을 최대한 이용함과 동시에 최단거리로 이동할 수 있는 경로를 도출하기 위하여 가치 반복법 알고리즘, 결정론적 방법론을 사용하였으며 실제 지형정보와 조난자가 도피·탈출 과정에서 만날 수 있는 장애요소들을 추가하여 모형의 현실성을 더하고자 하였다. 이를 통해 조난자가 조난 상황에서 어떠한 경로를 통해 도피·탈출을 수행할지 예측해 볼 수 있었다. 본 연구에서 제시한 모형은 보상구조의 재설계를 통해 여러 가지 다양한 작전 상황에 응용이 가능하며 실제 상황에서 조난자의 도피·탈출 경로를 예측하고 전투 탐색구조 작전을 진행시키는 데 있어 다양한 요소가 반영된 과학적인 기법에 근거한 의사결정 지원이 가능할 것이다.

• Asia Marketing Journal
• /
• 제13권4호
• /
• pp.105-137
• /
• 2012

1980년대 마케팅 분야에서 Relationship Marketing이란 새로운 접근방법이 등장한 이후 미국, 유럽 및 아시아 등지에서 다양한 연구가 활발히 이루어져 왔다. 급속한 환경변화와 경쟁의 세계화로 말미암아 기업들은 보다 적극적으로 환경과의 관계를 고려하지 않을 수 없게 된 상황에서 Relationship Marketing은 마케팅뿐만 아니라 전략분야에서도 중추적인 패러다임으로 자리를 잡아가면서 전통적인 마케팅 연구의 한계를 극복하는 동시에 기업의 마케팅 활동에 보다 풍부한 시사점을 제공하고 있다. 그러나 Relationship Marketing의 연구들은 마케팅 시스템의 상적 영역(commercial sector)에서의 관계구조 및 특성에 초점을 맞추는 조직간 관계 중심이 대부분이었다. 역설적으로 Relationship Marketing에 있어서 다시금 소비자 측면을 고려하지 않으면 안 되는 상황이 전개되고 있다. 1990년대 정보통신 기술의 발달과 웹의 상업적 적용이 빠르게 적용되고 있고, 이러한 새로운 기술들은 커뮤니케이션 개념을 변화시키고 있다. 2000년대 뉴미디어와 혁신 기술의 발달로 소비자들은 스스로 확대된 정보 네트워크를 갖추고 활발하게 정보교환을 하면서 생산이나 판매에 참여하고 있다(Kelly 1998: Jenkins 2006). 이러한 기업과 소비자의 변화는 기업과 소비자의 관계를 근본적으로 변화시키고 있는데, 그에 따라 최근 소비현상에서 소비자의 주도적인 역할이 자주 논의되고 있다.(Seybold 2000: Sharma and Sheth 2004: 임종원, 양석준 2006). 디지털 모바일환경에서의 서비스 유통구조인 플랫폼을 통한 새로운 관계 지배구조로서의 공동체(community)가 연구대상이 되고 있고, 행위적 측면에서도 디지털 환경과 맞물린 소비자 참여 역할 변화는 마케팅 시스템에서 커다란 변화를 요구하고 있다. 본 연구는 지금까지의 Relationship Marketing 연구 성과를 (1) 철학적 측면, (2) 구조적 측면, (3) 행동적 측면, (4) 마케팅 성과 측면에서 전통적 마케팅 연구 관점과 비교 검토하는 동시에 21세기의 새로운 현실, 즉 디지털 환경에서 뉴미디어의 보편화와 고객 참여의 고도화에 따른 마케팅 환경과 마케팅 시스템의 변화에 초점을 맞추어 소비자의 조직화라는 관점에서 공동 가치창조를 위한 연결마케팅공동체의 형성 가능성을 제시하고 향후 Relationship Marketing 연구의 방향을 모색해보고자 하였다.

• 벤처창업연구
• /
• 제18권1호
• /
• pp.203-223
• /
• 2023

최근 글로벌 시장에서 플랫폼 산업이 급격히 성장함과 동시에 경쟁이 심화되고 있으며, 향후 다양한 산업분야와 접목하여 플랫폼 산업의 영역과 범위는 더욱 확대될 전망이다. 따라서 플랫폼 시장에서 국내 플랫폼 기업들이 글로벌 경쟁력을 갖추기 위해서는 플랫폼 비즈니스 생태계 및 성공요인에 대한 연구가 필요하다. 그러나 최근 플랫폼 관련 연구는 플랫폼 비즈니스 현황분석, 플랫폼 경제, 플랫폼의 간접 네트워크 외부성 등의 특성에 관한 이론적 연구가 대부분을 차지했다. 따라서 본 연구는 기존 선행연구들에서 제안되고 있는 실리콘밸리 기업생태계의 성공요인들을 통합적으로 분석하고, 동시에 실제 실리콘밸리 플랫폼 기업생태계의 이해관계자들을 대상으로 추출된 성공요인들을 분석하였다. 그리고 이러한 요인들을 기반으로 플랫폼 기업생태계 이해관계자들에게 성공방안을 제안하기 위한 방안으로 IPA분석과 심층인터뷰(in-depth interview)를 진행하였다. 분석 결과, 선행연구들을 통해 수집한 성공요인들 중 비교적 현재 실리콘밸리에서 중요도와 만족도가 모두 잘 유지되고 있는 요인은 인력, 자본, 도전문화가 확인되었다. 결국 현재의 실리콘밸리가 우수한 인적자원과 풍부한 자본을 바탕으로 이를 활용해 마음껏 도전해볼 수 있는 환경과 문화가 조성된 것이 실리콘밸리의 플랫폼 비즈니스의 성공에 가장 크게 기여하고 있다는 것을 알 수 있다. 한편, 실리콘밸리의 플랫폼 기업생태계에 있어서 중요도는 높지만, 현재 이해관계자들의 만족도가 상대적으로 낮게 나타나는 요인으로는 '활발한 기업 간의 학습과 벤치마킹', '구성원 간의 강한 유대감과 협력관계'임을 확인되었고, 향후 해당 요인들을 강화하기 위한 관심과 노력이 필요한 것으로 분석되었다. 마지막으로 최소한의 관리만이 필요한 요인들은 시장의 자율경쟁에 필요한 제도 및 정책들과 '기업지원 서비스 산업', '네임밸류', '분사창업' 등이었으며, 이러한 요인들은 문헌조사에서는 중요하게 지적되었지만, 시대와 환경의 변화로 인해 그 중요도와 만족도에 있어서 우선순위가 낮아졌다는 연구결과가 도출되었다. 본 연구는 기존 선행연구들에서 제안되고 있는 실리콘밸리 기업생태계의 성공요인들을 통합적으로 분석하고, 동시에 실제 실리콘밸리 플랫폼 기업생태계의 이해관계자들을 대상으로 추출된 성공요인들을 분석하였다는데 이론적 의의를 찾을 수 있다. 또한, 추출된 다양한 요인들을 기반으로 IPA 분석을 통해 중요도 및 만족도를 동시에 살펴보았다는 점에서 또 다른 학문적 의의가 있다 하겠다. 실무적인 시사점으로는 정부 및 기업에게 국내 플랫폼 기업의 성장을 위한 이론적 근거와 플랫폼 기업 생태계의 성공요인에 대한 구체적인 정보를 제공함으로써 국내 플랫폼 생태계 형성에 기여하였다는 점에서 의의를 가진다.

• 벤처창업연구
• /
• 제18권3호
• /
• pp.97-113
• /
• 2023

본 연구는 협력지향성이 추가된 사회적기업가정신 모형을 일반화하고 모형의 이론적·실무적 활용 가능성을 높이고자 측정도구를 개발하여 사회적기업의 경영자 389명을 대상으로 실증하였다. 측정도구 개발은 선행연구 고찰을 통해 예비측정문항을 구성하고 측정문항에 대한 전문가 패널 검토를 거쳐 잠정적으로 다섯 개 영역, 40개의 측정문항으로 설문지를 구성하였다. 한국의 사회적기업 경영자를 대상으로 설문조사를 실시하여 총 389부의 설문이 수집되었으며, 이 중 분석 가능한 설문지 375부를 활용하여 탐색적 요인분석과 확인적 요인분석을 실시하였다. 탐색적 요인분석과 신뢰도 분석을 통해 24개의 문항에 대한 다섯 개 요인이 도출되었다. 일·이차 확인적 요인분석을 포함한 일련의 분석과정을 통하여 새롭게 구성된 사회적기업가정신 연구모형의 모형적합성을 확인하고 척도의 타당성과 신뢰성을 검증하였다. 본 연구에서는 협력지향성이 추가된 사회적기업가정신: 사회적가치지향성; 혁신성; 진취성; 위험감수성; 협력지향성 모형을 측정하는 도구를 새롭게 개발하고 양적연구를 수행하여 연구모형을 객관화함으로써 모형의 일반화 가능성을 입증하였다. 또한 연구를 통해 협력지향성이 사회적기업의 자원동원 및 역량강화, 기회 및 성과 창출, 사회적 자본 및 네트워크 강화, 거버넌스 구축을 위한 기업의 의사결정 및 활동의 행태로 발현됨을 확인하였다. 이러한 연구의 결과는 사회적기업가정신 연구의 이론적 설명력을 향상시킴과 동시에 후속 연구의 이론적 확장 근거와 토대를 제공한다. 다음으로 본 연구에서 타당성과 신뢰성이 검증된 사회적기업가정신 척도는 사회적기업가정신을 측정하는 도구로 학술연구와 실무에서 폭넓게 활용될 수 있다. 새롭게 개발된 척도는 사회적기업가정신 관련 연구에 있어서 조직차원의 행동적 관점에서 사회적기업가정신을 측정하는 도구로 활용될 수 있는 학술적 근거를 마련하였으며, 실무적으로도 기업의 기업가적 활동을 증진하고 자생력 강화를 지원하기 위한 조직의 사회적기업가정신 수준 측정 및 진단 도구로 활용될 수 있다.

• 경영정보학연구
• /
• 제21권4호
• /
• pp.99-123
• /
• 2019

지식 정보화 시대에 대표적인 고부가가치 산업으로서 소프트웨어 산업에 대한 중요성이 증대되고 있으며, 그 중에서도 오픈소스 소프트웨어는 소스코드 공개, 자유로운 수정과 배포, 공급업체에 대한 의존성 탈피, 비용 절감과 같은 이점을 바탕으로 빠르게 활동 영역을 확장해가고 있다. 특히, 오픈소스 소프트웨어는 클라우드, 사물인터넷, 인공지능, 빅데이터 등과 같은 새로운 정보기술과 접목하여 활용도가 높을 것으로 예상되고 소프트웨어의 신기술 발전을 주도할 수 있다는 점에서 다양한 긍정적인 효과를 얻을 수 있을 것으로 전망되고 있다. 글로벌 IT 기업들은 이러한 오픈소스 소프트웨어를 비즈니스 혁신을 위해 적극적으로 활용하고 있으며 국내에서도 오픈소스 소프트웨어를 활성화하기 위한 관련정책과 기업들의 노력이 이어지고 있다. 오픈소스 소프트웨어가 주목 받음에 따라 이와 관련된 연구도 활발하게 진행되고 있으나 조직들이 어떠한 이유로 기존의 비공개 소프트웨어에서 오픈소스 소프트웨어로 전환하게 되는가에 하는 연구는 미비한 실정이다. 이에 본 연구는 인간의 이주행동을 설명하는데 유용한 이론적 틀로 알려진 Push-Pull-Mooring 프레임워크를 기반으로 오픈소스 소프트웨어로의 전환에 영향을 미치는 요인들을 제안하고 그 관계를 실증분석을 통해 확인하고자 하였다. 이를 위해 관련 기업에서 수집된 총 268부를 바탕으로 본 연구에서 제안한 연구모형의 가설을 검증하였다. 연구결과, push 요소인 지속적 유지비용, 벤더 의존성, 기능적 무차별성, SW 자원의 비효율성, 그리고 pull 요소인 네트워크 기반지원, 시험 가능성, 전략적 유연성이 오픈소스 소프트웨어 전환에 유의미한 영향을 미치는 것으로 나타났지만, 지식수준향상은 유의 하지 않은 것으로 판명 되었다. 또한, Mooring 효과로 관리자의 SW 경쟁력 확보의지는 push와 pull요소 중 지식수준향상과 OSS 전환 관계를 제외한 모든 관계를 강화시키는 것으로 나타났다. 본 연구의 결과는 오픈소스 소프트웨어에 대한 연구를 확장할 수 있는 기반을 제공하고 관련 기업들에게 OSS로의 전환에 대한 유용한 정보를 제공할 수 있을 것이다.

• 기록학연구
• /
• 제79호
• /
• pp.5-32
• /
• 2024

한국 정부가 UN의 2022년 전자정부 발전 지수에서 UN가입 193개국 중 3위에 랭크됐다. 그동안 꾸준히 상위국으로 평가된 한국은 분명 세계 전자정부의 선도국이라 할 수 있다. 전자정부의 윤활유는 데이터다. 데이터는 그 자체로 정보가 아니고 기록도 아니지만 정보와 기록의 원천이며 지식의 자원이다. 전자적 시스템을 통한 행정 행위가 보편화된 이후 당연히 데이터에 기반한 기록의 생산과 기술이 확대되고 진화하고 있다. 기술은 가치중립적인 듯 보이지만 사실 그 자체로 특정 세계관을 반영하고 있다. 더구나 비물질적 유통을 기반으로 하는 디지털 세계, 온라인 네트워크의 또 다른 아이러니는 반드시 물리적 도구를 통해서만 접속하고 접촉할 수 있다는 점이다. 디지털 정보는 논리적 대상이지만 반드시 어떤 유형이든 그것을 중계할 장치 없이는 디지털 자원을 읽어 내거나 활용할 수 없다. 초연결, 초지능을 무기로 하는 새로운 기술의 디지털 질서는 전통적인 권력 구조에 깊은 영향력을 끼칠 뿐만 아니라 기존의 정보 및 지식 전달 매개체에도 마찬가지의 영향을 미치고 있다. 더구나 데이터에 기반한 생성형 인공지능을 비롯해 새로운 기술과 매개가 단연 화두다. 디지털 기술의 전방위적 성장과 확산이 인간 역능의 증강과 사유의 외주화 상황까지 왔다고 볼 수 있을 것이다. 여기에는 딥 페이크를 비롯한 가짜 이미지, 오토 프로파일링, 사실처럼 생성해 내는 AI 거짓말(hallucination), 기계 학습데이터의 저작권 침해에 이르기까지 다양한 문제점 또한 내포하고 있다. 더구나 급진적 연결 능력은 방대한 데이터의 즉각적 공유를 가능하게 하고 인지 없이 행위를 발생시키는 기술적 무의식에 의존하게 된다. 그런 점에서 지금의 기술 사회의 기계는 단순 보조의 수준을 넘어서고 있으며 기계의 인간 사회 진입은 고도의 기술 발전에 따른 자연적인 변화 양상이라고 하기에는 간단하지 않은 지점이 존재한다. 시간이 지나며 기계에 대한 관점이 변화하게 될 것이기 때문이다. 따라서 중요한 것은 기계를 통한 커뮤니케이션, 행위의 결과로서의 기록이 생산되고 사용되는 방식의 변화가 의미하는 사회문화적 함의에 있다. 아카이브 영역에서도 초지능, 초연결사회를 향한 기술의 변화로 인해 데이터 기반 아카이브 사회는 어떤 문제에 직면하게 될 것인지, 그리고 그 속에서 누가 어떻게 기록과 데이터의 지속적 활동성을 입증하고 매체 변화의 주요 동인이 될 것인가에 대한 연구가 필요한 시점이다. 본 연구는 아카이브가 행위의 결과인 기록뿐만 아니라 데이터를 전략적 자산으로 인식할 필요성에서 시작했다. 이를 통해 전통적 경계를 확장하고 데이터 중심 사회에서 어떻게 재영토화를 이룰 수 있을지를 알아보았다.

• 마케팅과학연구
• /
• 제18권3호
• /
• pp.59-88
• /
• 2008

Digital Convergence means integration between industry, technology, and contents, and in marketing, it usually comes with creation of new types of product and service under the base of digital technology as digitalization progress in electro-communication industries including telecommunication, home appliance, and computer industries. One can see digital convergence not only in instruments such as PC, AV appliances, cellular phone, but also in contents, network, service that are required in production, modification, distribution, re-production of information. Convergence in contents started around 1990. Convergence in network and service begins as broadcasting and telecommunication integrates and DMB(digital multimedia broadcasting), born in May, 2005 is the symbolic icon in this trend. There are some positive and negative expectations about DMB. The reason why two opposite expectations exist is that DMB does not come out from customer's need but from technology development. Therefore, customers might have hard time to interpret the real meaning of DMB. Time is quite critical to a high tech product, like DMB because another product with same function from different technology can replace the existing product within short period of time. If DMB does not positioning well to customer's mind quickly, another products like Wibro, IPTV, or HSPDA could replace it before it even spreads out. Therefore, positioning strategy is critical for success of DMB product. To make correct positioning strategy, one needs to understand how consumer interprets DMB and how consumer's interpretation can be changed via communication strategy. In this study, we try to investigate how consumer perceives a new product, like DMB and how AD strategy change consumer's perception. More specifically, the paper segment consumers into sub-groups based on their DMB perceptions and compare their characteristics in order to understand how they perceive DMB. And, expose them different printed ADs that have messages guiding consumer think DMB in specific ways, either cellular phone or personal TV. Research Question 1: Segment consumers according to perceptions about DMB and compare characteristics of segmentations. Research Question 2: Compare perceptions about DMB after AD that induces categorization of DMB in direction for each segment. If one understand and predict a direction in which consumer perceive a new product, firm can select target customers easily. We segment consumers according to their perception and analyze characteristics in order to find some variables that can influence perceptions, like prior experience, usage, or habit. And then, marketing people can use this variables to identify target customers and predict their perceptions. If one knows how customer's perception is changed via AD message, communication strategy could be constructed properly. Specially, information from segmented customers helps to develop efficient AD strategy for segment who has prior perception. Research framework consists of two measurements and one treatment, O1 X O2. First observation is for collecting information about consumer's perception and their characteristics. Based on first observation, the paper segment consumers into two groups, one group perceives DMB similar to Cellular phone and the other group perceives DMB similar to TV. And compare characteristics of two segments in order to find reason why they perceive DMB differently. Next, we expose two kinds of AD to subjects. One AD describes DMB as Cellular phone and the other Ad describes DMB as personal TV. When two ADs are exposed to subjects, consumers don't know their prior perception of DMB, in other words, which subject belongs 'similar-to-Cellular phone' segment or 'similar-to-TV' segment? However, we analyze the AD's effect differently for each segment. In research design, final observation is for investigating AD effect. Perception before AD is compared with perception after AD. Comparisons are made for each segment and for each AD. For the segment who perceives DMB similar to TV, AD that describes DMB as cellular phone could change the prior perception. And AD that describes DMB as personal TV, could enforce the prior perception. For data collection, subjects are selected from undergraduate students because they have basic knowledge about most digital equipments and have open attitude about a new product and media. Total number of subjects is 240. In order to measure perception about DMB, we use indirect measurement, comparison with other similar digital products. To select similar digital products, we pre-survey students and then finally select PDA, Car-TV, Cellular Phone, MP3 player, TV, and PSP. Quasi experiment is done at several classes under instructor's allowance. After brief introduction, prior knowledge, awareness, and usage about DMB as well as other digital instruments is asked and their similarities and perceived characteristics are measured. And then, two kinds of manipulated color-printed AD are distributed and similarities and perceived characteristics for DMB are re-measured. Finally purchase intension, AD attitude, manipulation check, and demographic variables are asked. Subjects are given small gift for participation. Stimuli are color-printed advertising. Their actual size is A4 and made after several pre-test from AD professionals and students. As results, consumers are segmented into two subgroups based on their perceptions of DMB. Similarity measure between DMB and cellular phone and similarity measure between DMB and TV are used to classify consumers. If subject whose first measure is less than the second measure, she is classified into segment A and segment A is characterized as they perceive DMB like TV. Otherwise, they are classified as segment B, who perceives DMB like cellular phone. Discriminant analysis on these groups with their characteristics of usage and attitude shows that Segment A knows much about DMB and uses a lot of digital instrument. Segment B, who thinks DMB as cellular phone doesn't know well about DMB and not familiar with other digital instruments. So, consumers with higher knowledge perceive DMB similar to TV because launching DMB advertising lead consumer think DMB as TV. Consumers with less interest on digital products don't know well about DMB AD and then think DMB as cellular phone. In order to investigate perceptions of DMB as well as other digital instruments, we apply Proxscal analysis, Multidimensional Scaling technique at SPSS statistical package. At first step, subjects are presented 21 pairs of 7 digital instruments and evaluate similarity judgments on 7 point scale. And for each segment, their similarity judgments are averaged and similarity matrix is made. Secondly, Proxscal analysis of segment A and B are done. At third stage, get similarity judgment between DMB and other digital instruments after AD exposure. Lastly, similarity judgments of group A-1, A-2, B-1, and B-2 are named as 'after DMB' and put them into matrix made at the first stage. Then apply Proxscal analysis on these matrixes and check the positional difference of DMB and after DMB. The results show that map of segment A, who perceives DMB similar as TV, shows that DMB position closer to TV than to Cellular phone as expected. Map of segment B, who perceive DMB similar as cellular phone shows that DMB position closer to Cellular phone than to TV as expected. Stress value and R-square is acceptable. And, change results after stimuli, manipulated Advertising show that AD makes DMB perception bent toward Cellular phone when Cellular phone-like AD is exposed, and that DMB positioning move towards Car-TV which is more personalized one when TV-like AD is exposed. It is true for both segment, A and B, consistently. Furthermore, the paper apply correspondence analysis to the same data and find almost the same results. The paper answers two main research questions. The first one is that perception about a new product is made mainly from prior experience. And the second one is that AD is effective in changing and enforcing perception. In addition to above, we extend perception change to purchase intention. Purchase intention is high when AD enforces original perception. AD that shows DMB like TV makes worst intention. This paper has limitations and issues to be pursed in near future. Methodologically, current methodology can't provide statistical test on the perceptual change, since classical MDS models, like Proxscal and correspondence analysis are not probability models. So, a new probability MDS model for testing hypothesis about configuration needs to be developed. Next, advertising message needs to be developed more rigorously from theoretical and managerial perspective. Also experimental procedure could be improved for more realistic data collection. For example, web-based experiment and real product stimuli and multimedia presentation could be employed. Or, one can display products together in simulated shop. In addition, demand and social desirability threats of internal validity could influence on the results. In order to handle the threats, results of the model-intended advertising and other "pseudo" advertising could be compared. Furthermore, one can try various level of innovativeness in order to check whether it make any different results (cf. Moon 2006). In addition, if one can create hypothetical product that is really innovative and new for research, it helps to make a vacant impression status and then to study how to form impression in more rigorous way.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.