• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제29권4호
• /
• pp.745-762
• /
• 2015

최근 우리나라 수학교육에 있어서 정의적 영역이 강조되고 있는데, 특히 수학 학업성취도와 관련하여 수학적 성향이 중요시되고 있다. 한편 우리나라 교육과정은 자주 바뀌었는데, 7차 교육과정에서 인문계는 미적분을 배우지 않았으나 2007 개정 교육과정에서는 인문계도 미적분을 배웠다. 본 연구에서는 D대학교 공과대학에 입학한 7차 교육과정 세대인 2011년과 2007 개정 교육과정 세대인 2015년 신입생들을 대상으로 수학적 성향의 변화를 분석하였다. 이를 위하여 수학적 성향 검사를 실시하였고, 학생들의 수학적 배경 및 대학수학에 대한 학습목표를 설문하였으며 수학기초학력을 평가하여 고등학교 계열별, 대학수학능력시험 수학 영역 유형별, 대학수학 학습목표별, 수학기초학력별로 2011년과 2015년 수학적 성향의 각 요인의 변화를 분석하였다. 그 결과, 2011년과 2015년 학생들 사이에는 자신감, 융통성, 의지력, 호기심, 가치, 심미성 등 수학적 성향에서 많은 차이를 보였다.

• 한국공작기계학회논문집
• /
• 제10권4호
• /
• pp.55-64
• /
• 2001

In this study, hemisphere and cylindrical shapes were machined for different tool paths and machining conditions with ball endmill cutters. Tool deflection, cutting forces and shape accuracy were measured according to the inclination position of the sculptured surface. As the decreasing of inclination position angle, the tool deflection was increased due to the decreased cutting speed when the cutting edge is approaching toward the center. Tool deflection when upward cutting is obtained less than that of downward cutting and down-milling in upward cutting showed the least tool deflection for the sculptured surface. Roundness values were found in least roundness error when down-milling in upward cutting. It is obtained the very little difference between 90。and 45。 of inclination position angle. The best surface roughness value was obtained in upward up-milling and showed different tendency with tool deflection and cutting force. For down-milling, the cutting resistance of the side wall direction is larger than that of feed direction. Therefore, this phenomenon which is received over cutting resistance can be caused of chatter.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 봄 학술발표회 논문집
• /
• pp.83-88
• /
• 1994

The DDC(dynamic deep compection) was carried out the main method of ground improvement for construction of municipal high way. The project area is composed of the municipal waste dumped, demolished building debris, coal ash and industrial waste made between 1983 and 1989. From the result of fileld measurement, it was found that waste landfill was compressed considerably (15 ~ 20% of full depth), and the strength was increased satisfactorily(20 ~ 120% of original N-value, 55 ~ 230% of original dynamic cone penetration resistance). And the chemical inclination of the municipal waste landfill was analyzed for expection and control of settlement.

• 한국조리학회지
• /
• 제23권4호
• /
• pp.56-65
• /
• 2017

This study investigated quality characteristics of sourdough bread using fermented fig. Bread containing sourdough, compared with control group, showed high inclination in moisture content. Sample with 20% of sourdough was the highest, and sample with 40% of sourdough was the lowest. There was a significant difference among samples. As for appearance and cross structure of sourdough bread with fermented fig, there was an inclination that the bigger sourdough bread is, the bigger cell is and the more even its structure is. As for the chromaticity, sample with 20% of sourdough showed the lowest value of L and value of b. Value of L and b got lower as its volume got bigger. Value of a, on the one hand, showed no fixed inclination. As for textural characteristics, sourdough bread showed lower hardness, cohesiveness, and gumminess, and higher springiness and cohesiveness than control group. There were significant differences among all items, but there was no significant difference in hardness, springiness, cohesiveness, and gumminess among samples. Changes in result of sensory analysis suggested that sample with 20% of sourdough showed the highest overall preference including color, flavor, taste, and appearance. On the other hand, sample with 40% of sourdough showed the lowest overall preference. Considering preference through sensory analysis and quality characteristics of sourdough bread with fermented fig, therefore, it seemed that sourdough bread with 20% of sourdough had the best characteristics.

• 설비공학논문집
• /
• 제15권10호
• /
• pp.787-794
• /
• 2003

The effect of inclination angle on natural convection heat transfer has been studied for water layers. The range of the Raleigh number was from the subcritical value to 1.4${\times}$10$^{7}$ , and the range of the inclination angle, $\theta$, measured from the horizontal was 0$\leq$$\theta$$\leq$180$^{\circ}$. For horizontal water layers, present results agreed well with the results of previous investigators and also showed significant departures from the results of air layers in the turbulent regime. Inclined cylindrical water layers showed secondary maxima in heat transfer, whereas rectangular air layers showed continuous decline of Nusselt number.

• Archives of Plastic Surgery
• /
• 제40권5호
• /
• pp.559-563
• /
• 2013

Background One of the reasons women with macromastia chose to undergo a breast reduction is to relieve their complaints of back, neck, and shoulder pain. We hypothesized that changes in posture after surgery may be the reason for the pain relief and that patient posture may correlate with symptomatic macromastia and may serve as an objective measure for complaints. The purpose of our study was to evaluate the effect of reduction mammaplasty on the posture of women with macromastia. Methods A prospective controlled study at a university medical center. Forty-two patients that underwent breast reduction were studied before surgery and an average of 4.3 years following surgery. Thirty-seven healthy women served as controls. Standardized lateral photos were taken. The inclination angle of the back was measured. Regression analysis was performed for the inclination angle. Results Preoperatively, the mean inclination angle was 1.61 degrees ventrally; this diminished postoperatively to 0.72 degrees ventrally. This change was not significant (P-value=0.104). In the control group that angle was 0.28 degrees dorsally. Univariate regression analysis revealed that the inclination was dependent on body mass index (BMI) and having symptomatic macromastia; on multiple regression it was only dependent on BMI. Conclusions The inclination angle of the back in breast reduction candidates is significantly different from that of controls; however, this difference is small and probably does not account for the symptoms associated with macromastia. Back inclination should not be used as a surrogate "objective" measure for symptomatic macromastia.

• 대한치과교정학회지
• /
• 제50권1호
• /
• pp.26-32
• /
• 2020

Objective: The Heat Induction Typodont System (HITS), used in some recent studies, has a distinct advantage over previous tooth movement simulation methods. This study aimed to compare inclination and vertical changes between the single-wire and double-wire techniques during en masse retraction with different lengths of lever arms in lingual orthodontics using an upgraded version of the HITS. Methods: Duet lingual brackets, which have two main slots, were used in this study. Forty samples were divided into four groups according to the length of the lever arm (3-mm or 6-mm hook) and the retraction wire (single-wire or double-wire). Four millimeters of en masse retraction was performed using lingual appliances. Thereafter, 3-dimensional-scanned images of the typodont were analyzed to measure inclination and vertical changes of the anterior teeth. Results: Incisor inclination presented more changes in the single-wire groups than in the double-wire groups. However, canine inclination did not differ between these groups. Regarding vertical changes, only the lateral incisors in the single-wire groups presented significantly larger values than did those in the double-wire groups. Combining the effect of hook lengths, among the four groups, the single-wire group with the 3-mm hook had the highest value, while the double-wire group with the 6-mm hook showed the least decrease in crown inclination and extrusion. Conclusions: The double-wire technique with an extended lever arm provided advantages over the single-wire technique with the same lever arm length in preventing torque loss and extrusion of the anterior teeth during en masse retraction in lingual orthodontics.

• 한국학교수학회논문집
• /
• 제4권2호
• /
• pp.61-74
• /
• 2001

The purposes of this study are to develop the mathematical performance assessment tasks and to apply them to the middle school students. And I also intend to know the students' inclination and learning attitude to mathematics. In order to satisfy this study, I developed the performance assessment tasks and the standard program of marking about the mathematical function and statistics for the first grade students at middle school. After examining the students' basic investigation, their inclination and learning attitude to mathematics, I applied these developed tasks to them After that I put both classes and performance assessment into operation in all 15 periods. I set up two classes of the first grade students (49 students) at J middle school in Kongju, Chungcheongnam-do as a model group. The results of this study are as follows: First, owing to the developed performance assessment tasks of function and statistics, the teachers can operate the assessment system as a process of teaching and learning. Second, because of the application of mathematical performance assessment tasks, we can change the students' inclination and learning attitude to mathematics affirmatively. And by using these tasks, we can help the students to think mathematically. In this way, the students will be able to realize the real value of mathematics and have a growing interest in mathematics through all these meaningful processes. Judging from this study, we can elevate the students' abilities of problem solving and reasoning and improve teaching-learning method by applying the performance assessment tasks to them. Thanks to these tasks, the students will be changed affirmatively in their inclination and learning attitude to mathematics. I think that these tasks are very good assessment method which can call forth curiosity and interest. Besides, they can also help the students realize the real value of mathematics.

• Geomechanics and Engineering
• /
• 제15권6호
• /
• pp.1193-1205
• /
• 2018

A footing located on slopes possess relatively lower bearing capacity as compared to the footing located on the level ground. The bearing capacity further reduces under seismic loading. The adverse effect of slope inclination and seismic loading on bearing capacity can be minimized by proving sufficient setback distance. Though few earlier studies considered setback distance in their analysis, the range of considered setback distance was very narrow. No study has explored the critical setback distance. An attempt has been made in the present study to comprehensively investigate the effect of setback distance on footing under seismic loading conditions. The pseudo-static method has been incorporated to study the influence of seismic loading. The rate of decrease in seismic bearing capacity with slope inclination become more evident with the increase in embedment depth of footing and angle of shearing resistance of soil. The increase in bearing capacity with setback distance relative to level ground reduces with slope inclination, soil density, embedment depth of footing and seismic acceleration. The critical value of setback distance is found to increase with slope inclination, embedment depth of footing and density of soil. The critical setback distance in seismic case is found to be more than those observed in the static case. The failure mechanisms of footing under seismic loading is presented in detail. The statistical analysis was also performed to develop three equations to predict the critical setback distance, seismic bearing capacity factor ($N_{{\gamma}qs}$) and change in seismic bearing capacity (BCR) with slope geometry, footing depth and seismic loading.

• Journal of Oral Medicine and Pain
• /
• 제21권2호
• /
• pp.393-405
• /
• 1996

This study was performed to investigate the effects of changes of head posture and cervical spine shape on the mandibular resting or clenching electromyographic(EMG) activity in anterior temporalis(TA), masseter(MM), sternocleidomastoid muscle(SCM) and trapezius insertion(TI). 30 patients with Temporomandibular Disorders(TMDs) participated in this study. EMG activity($\mu$V) at rest and clenching was observed in four head postures, namely natural head posture(NHP), forward head posture(FHP), upward head posture(UHP), and downward head posture(DHP). For taking in upward or downward head posture head was inclined 10$^{\circ}$ upward or downward and CROM$^\textregistered$(cervical-range-of motion, Performance attainment Inc., USA) was used to maintain same posture during the procedure, and BioEMG$^\textregistered$ (Bioelectromyograph, Bioresearch Inc., USA) was used to record EMG activity in the above four muscles at eight locations on both sides. The recorded EMG activity($\mu\textrm{V}$) were compared and analyzed by cervical spine shape such as the head position from plum line, cervical curvature, and cervical inclination. Head position from plum line was measured in vertical plate calibrated with cm scale, comical curvature by radius was measured with adjustable curved ruler, and cervical inclination by cervical vertebrae tangent(CVT)was measured in lateral cephalograph. The results obtained were as follows : 1. Mean value of head position from plum line, cervical curvature, and cervical inclination were 4.8cm, 26.7cm, and 86.6$^{\circ}$, respectively, And There were no correlationship among these items. 2. For resting EMG activity by head posture, the value in anterior temporalis was higher at FHP than at DHP, the value in masseter was higher at FHP than at NHP, and DHP, the value in sternocleidomastoid muscle was higher at UHP than at NHP, and the value in trapezius insertion was higher at FHP and DHP than, NHP and UHP. The clenching EMG activity, however, did not show any difference by head posture. 3. Comparison of resting and clenching EMG activity between higher and lower groups by head position from plum line, cervical curvature, and cervical inclination did not show any significant difference. From this result, the author concluded that the cervical spine shape had not significantly affected to EMG activity in usual patients with TMDs.