• 한국재료학회지
• /
• 제23권12호
• /
• pp.714-721
• /
• 2013

A stoichiometric mixture of evaporating materials for $ZnAl_2Se_4$ single-crystal thin films was prepared in a horizontal electric furnace. These $ZnAl_2Se_4$ polycrystals had a defect chalcopyrite structure, and its lattice constants were $a_0=5.5563{\AA}$ and $c_0=10.8897{\AA}$.To obtain a single-crystal thin film, mixed $ZnAl_2Se_4$ crystal was deposited on the thoroughly etched semi-insulating GaAs(100) substrate by a hot wall epitaxy (HWE) system. The source and the substrate temperatures were $620^{\circ}C$ and $400^{\circ}C$, respectively. The crystalline structure of the single-crystal thin film was investigated by using a double crystal X-ray rocking curve and X-ray diffraction ${\omega}-2{\theta}$ scans. The carrier density and mobility of the $ZnAl_2Se_4$ single-crystal thin film were $8.23{\times}10^{16}cm^{-3}$ and $287m^2/vs$ at 293 K, respectively. To identify the band gap energy, the optical absorption spectra of the $ZnAl_2Se_4$ single-crystal thin film was investigated in the temperature region of 10-293 K. The temperature dependence of the direct optical energy gap is well presented by Varshni's relation: $E_g(T)=E_g(0)-({\alpha}T^2/T+{\beta})$. The constants of Varshni's equation had the values of $E_g(0)=3.5269eV$, ${\alpha}=2.03{\times}10^{-3}eV/K$ and ${\beta}=501.9K$ for the $ZnAl_2Se_4$ single-crystal thin film. The crystal field and the spin-orbit splitting energies for the valence band of the $ZnAl_2Se_4$ were estimated to be 109.5 meV and 124.6 meV, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that splitting of the ${\Delta}so$ definitely exists in the ${\Gamma}_5$ states of the valence band of the $ZnAl_2Se_4/GaAs$ epilayer. The three photocurrent peaks observed at 10 K are ascribed to the $A_1$-, $B_1$-exciton for n = 1 and $C_{21}$-exciton peaks for n = 21.

• 센서학회지
• /
• 제24권6호
• /
• pp.404-411
• /
• 2015

A stoichiometric mixture of evaporating materials for $BaAl_2Se_4$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $BaAl_2Se_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperatures were $610^{\circ}C$ and $410^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $BaAl_2Se_4$ single crystal thin films measured from Hall effect by van der Pauw method are $8.29{\times}10^{-16}cm^{-3}$ and $278cm^2/vs$ at 293 K, respectively. The temperature dependence of the energy band gap of the $BaAl_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=3.4205eV-(4.3112{\times}10^{-4}eV/K)T^2/(T+232 K)$. The crystal field and the spin-orbit splitting energies for the valence band of the $BaAl_2Se_4$ have been estimated to be 249.4 meV and 263.4 meV, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that the splitting of the ${\Delta}so$ definitely exists in the ${\Gamma}_5$ states of the valence band of the $BaAl_2Se_4/GaAs$ epilayer. The three photocurrent peaks observed at 10 K are ascribed to the $A_1$-, $B_1$-exciton for n =1 and $C_{31}$-exciton peaks for n=31.

• 센서학회지
• /
• 제16권1호
• /
• pp.1-6
• /
• 2007

A silver indium sulfide ($AgInS_{2}$) epilayer was grown by the hot wall epitaxy method, which has not been reported in the literature. The grown $AgInS_{2}$ epilayer has found to be a chalcopyrite structure and evaluated to be high quality crystal. From the photocurrent measurement in the temperature range from 30 K to 300 K, the two peaks of A and B were only observed, whereas the three peaks of A, B, and C were seen in the PC spectrum of 10 K. These peaks are ascribed to the band-to-band transition. The valence band splitting of $AgInS_{2}$ was investigated by means of the photocurrent measurement. The crystal field splitting, ${\Delta}cr$, and the spin orbit splitting, ${\Delta}so$, have been obtained to be 0.150 eV and 0.009 eV at 10 K, respectively. And, the energy band gap at room temperature has been determined to be 1.868 eV. Also, the temperature dependence of the energy band gap, $E_{g}$(T), was determined.

• ETRI Journal
• /
• 제38권2호
• /
• pp.265-271
• /
• 2016

We analyzed the interface characteristics of Zn-based thin-film buffer layers formed by a sulfur thermal cracker on a $Cu(In,Ga)Se_2$ (CIGS) light-absorber layer. The analyzed Zn-based thin-film buffer layers are processed by a proposed method comprising two processes - Zn-sputtering and cracker-sulfurization. The processed buffer layers are then suitable to be used in the fabrication of highly efficient CIGS solar cells. Among the various Zn-based film thicknesses, an 8 nm-thick Zn-based film shows the highest power conversion efficiency for a solar cell. The band alignment of the buffer/CIGS was investigated by measuring the band-gap energies and valence band levels across the depth direction. The conduction band difference between the near surface and interface in the buffer layer enables an efficient electron transport across the junction. We found the origin of the energy band structure by observing the chemical states. The fabricated buffer/CIGS layers have a structurally and chemically distinct interface with little elemental inter-diffusion.

• 대한화학회지
• /
• 제60권6호
• /
• pp.402-409
• /
• 2016

3-Mecaptopropionic acid (MPA) 리간드와 하이브리드 타입 리간드($MPA+CdCl_2$)로 각각 부동화(passivation) 된 2.8 nm 크기의 황화납 콜로이드 양자점 박막을 제작하고, 각각을 대기 중, 질소 분위기에서 열처리, 오존 처리 하였을 때 나타나는 두 양자점 박막의 전자 구조와 조성 원소의 변화를 광전자 분광법을 이용하여 연구하였다. 대기에서 열처리는 리간드 종류와 관계없이 황화납 양자점의 가전자대 시작점이 공통적으로 약한 p-도핑 효과가 있음을 직접적으로 확인할 수 있었다. 또한, 오존처리 후 두 황화납 양자점 표면에 공통적으로 $Pb(OH)_2$, $PbSO_x$, PbO를 형성하는 것을 확인하였다. 하지만, 오존에 의해 형성된 산화물 중 PbO 성분은 특별히 하이브리드 타입 리간드로 부동화 된 양자점에서 형성된 양이 MPA 리간드만으로 부동화 된 양자점과 비교했을 때 감소한 것을 확인할 수 있었다. 이것은 PbS(111) 격자면에 있는 과량의 Pb 표면이 $Cl_2$으로 부동화되면서, Pb 양이온과 오존의 반응을 차단함으로써 PbO의 형성을 어렵게 했기 때문으로 추정된다.

• Current Photovoltaic Research
• /
• 제3권2호
• /
• pp.65-70
• /
• 2015

We applied KF on CIGS film to modify CIGS surface with a wider-bandgap surface layer. With the KF deposition the surface of CIGS film had fine particle on the CIGS surface at 350 and $300^{\circ}C$. No fine particle was detected at 500 and $250^{\circ}C$. With the KF treatment, the Ga and O content increased at the surface, while the In and Cu content decreased. The valence band maximum was lowered with KF treatment. The composition profile and band structure were positive side of applying KF on the CIGS surface. However, the efficiency decreased with the KF treatment due to high series resistance, probably due to too thick surface layer. A smaller amount of KF should be supplied and more systematic analysis is necessary to obtain a reproducible higher efficiency CIGS solar cells.

• 센서학회지
• /
• 제1권2호
• /
• pp.165-172
• /
• 1992

3가와 5가 이온의 첨가가 전기전도도 및 감응도에 어떤 영향을 미치는가를 확인하기 위하여, In와 Sb를 Tin Oxide에 공침법으로 첨가하였다. Sb는 5가 이온으로 cassiterite 구조에 들어가서 열에너지에 의하여 이들 이온을 여기시켜 전도대로 밀어올리리라고 여겨진다. In 이온은 결정격자 속에 $In^{3+}$로 들어가서 원자가대로 부터 전자를 받게 되고 그러므로써 1가나 2가가 되리라 생각한다. 그러나, 이러한 현상들이 $SnO_{2}$에 존재하는 전위장벽을 2종의 이온첨가에 의하여 일어나는 resistivity에 끼치는 영향과 비교해 볼 때 감응도에는 어떤 영향을 보이는지 고찰하였다.

• 한국재료학회지
• /
• 제4권6호
• /
• pp.620-625
• /
• 1994

자자들은 최근 비고용 Cu-Ta계의 기계적 합금화(Mechanical Alloying) 방법을 이용하여 이계에 있어서 비정질상의 형성에 대한 구조적 확인을 중성자 회절과 EXAFS(Extended X-ray Absorption Fine Structure)의 실험결과로 부터 얻었다. Cu-Ta계와 같이 혼합 엔탈피(Heat of Mixing: $\Delta$ Hmix)가 정인계에 있어서 비정질상 형성에 대한 연구는 구조적인 측면 뿐만 아니라. 시료의 전자물성에 대해서도 많은 연구가 되어야만 할 것으로 사료된다. 따라서 본 논문에서는 120시간 MA방법으로 제작한 시료에 대하여 초전도 천이온도 및 X선 광전자분광 실험에서 얻은 가전자대 구조의 전자물성을 측정하고, 그 결과로부터 이종원자 Cu와 Ta간의 결합은 화하결합에 의한 생성임을 확인하였는데, 이들 결과로부터 120시간 MA를 행하여 얻어진 시료는 확실하게 비정질 합금임을 알 수 있었다.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1190-1195
• /
• 2018

By employing soft X-ray magnetic circular dichroism (XMCD), soft X-ray absorption spectroscopy (XAS), and photoemission spectroscopy (PES), we have investigated the electronic structure of the candidate zero-moment half-metallic $Mn_3Ga$. We have studied the ball-milled and annealed $Mn_3Ga$ powder samples that exhibit nearly zero magnetization. Mn 2p XAS revealed that Mn ions in $Mn_3Ga$ are nearly divalent for both of the Mn ions having the locally octahedral symmetry and those having the locally tetrahedral symmetry. The measured Mn 2p XMCD spectrum of $Mn_3Ga$ is very similar to that of ferrimagnetic $MnFe_2O_4$ having divalent Mn ions. The sum-rule analysis of the Mn 2p XMCD spectrum shows that both the spin and orbital magnetic moments of Mn ions in $Mn_3Ga$ are negligibly small, in agreement with the nearly compensated-ferrimagnetic ground state of $Mn_3Ga$. The valence-band PES spectrum of $Mn_3Ga$ agrees well with the calculated density of states, supporting the half-metallic electronic structure of $Mn_3Ga$.

• Transactions on Electrical and Electronic Materials
• /
• 제7권1호
• /
• pp.26-29
• /
• 2006

We present the structural, magnetic, and electrical properties in the (Al,Mn)N films with various Mn concentrations grown by plasma-enhanced molecular beam epitaxy. X-ray diffraction analyses reveal that the (Al,Mn)N films have the wurtzite structure without secondary phases. All (Al,Mn)N films showed the ferromagnetic ordering. Particularly, ($Al_{1-x}Mn_{x}$)N film with x = 0.028 exhibited the highest magnetic moment per Mn atom at room temperature. Since all the films exhibit the insulating characteristics, the origin of ferromagnetism in (Al,Mn)N might be attributed to either indirect exchange interaction caused by virtual electron excitations from Mn acceptor level to the valence band within the samples or a percolation of bound magnetic polarons arisen from exchange interaction of localized carriers with magnetic impurities in a low carrier density regime.