• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2018-2030
• /
• 2015

A two stage ac drive configuration consisting of a single-phase line commutated rectifier and a three-phase voltage source inverter (VSI) is very common in low and medium power applications. The deterministic pulse width modulation (PWM) methods like sinusoidal PWM (SPWM) could not be considered as an ideal choice for modern drives since they result mechanical vibration and acoustic noise, and limit the application scope. This is due to the incapability of the deterministic PWM strategies in sprawling the harmonic power. The random PWM (RPWM) approaches could solve this issue by creating continuous harmonic profile instead of discrete clusters of dominant harmonics. Insufficient filtering at dc link results in the amplitude distortion of the input dc voltage to the VSI and has the most significant impact on the spectral errors (difference between theoretical and practical spectra). It is obvious that the sprawling effect of RPWM undoubtedly influenced by input fluctuation and the discrete harmonic clusters may reappear. The influence of dc link fluctuation on harmonics and their spreading effect in the VSI remains invalidated. A case study is done with four different filter capacitor values in this paper and results are compared with the constant dc input operation. This paper also proposes an ingenious RPWM, a ripple dosed sinusoidal reference-random carrier PWM (RDSRRCPWM), which has the innate capacity of suppressing the effect of input fluctuation in the output than the other modern PWM methods. MATLAB based simulation study reveals the fundamental component, total harmonic distortion (THD) and harmonic spread factor (HSF) for various modulation indices. The non-ideal dc link is managed well with the developed RDSRRCPWM applied to the VSI and tested in a proto type VSI using the field programmable gate array (FPGA).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.319-321
• /
• 2005

한국천문연구원에서는 한국우주전파관측망(Korean VLBI Network; KVN)에서 사용할 관측 시스템 중에서 소규모 자료획득시스템(DAS) 구축을 위하여 기가비트 고속샘플러, PC-VSI 보드, 소프트웨어 상관기를 도입하였다. 고속샘플러는 기가비트급 ADS1000, PC-VSI 보드는 VSI-H(VLBI Standard Interface Hardware) 표준을 따른 PCI 버스를 채택하고 있어 일반 컴퓨터에 설치하여 동작되며, 이 규격을 갖춘 시스템과의 데이터 입출력이 가능하다. 소프트웨어 상관기는 일본 NILT와의 연구협력을 통하여 본 연구원에서도 사용할 수 있게 되었으며, FX와 XF 형 2가지를 모두 갖추고 있다. 하지만 현재 구현된 소프트웨어 상관기는 측지 VLBI 관측을 위해 설계되어 있어, 향후 KVN의 하드웨어 상관기와 함께 천문 VLBI 관측을 위한 3기선 분의 소프트웨어 상관기로 개량하려고 한다. 이상에서 소개한 시스템을 좁은 의미로 K5 시스템이라고도 한다. 본 논문에서는 PC-VSI 보드에 대해 간략히 소개하고, K5 시스템을 이용하여 관측한 결과를 빨리 관측자가 원하는 정보를 얻을 수 있는 소프트웨어 상관기의 구조에 대해서도 소개하고자 한다.

• 천문학논총
• /
• 제20권1호
• /
• pp.125-134
• /
• 2005

In this paper, we propose a small-scale Gigabit VLBI observing system for the Korean VLBI Network (KVN) under construction. The system consists of high-speed sampler, IP-VLBI board, PC-VSI board, and software correlator. Radio signal received by receiver is sampled by high-speed sample. at 1 Gsps (Gigabit sample per second) rate with 2 bits quantization. The digitized signal is recorded in PC and the software correlator does the cross correlation. IP-VLBI board will be used for the geodesy VLBI observation, while PC-VSI board is for the astronomical VLBI observation. The PC-VSI board adopts the VSI-H (VLBI Standard Interface Hardware). The proposed system is based on commercial PCs and therefore can be built inexpensively.

• Journal of the Korean Data and Information Science Society
• /
• 제28권2호
• /
• pp.451-459
• /
• 2017

There are many researches showing that when a process change has occurred, variable sampling intervals (VSI) control chart is better than the fixed sampling interval (FSI) control chart in terms of reducing the required time to signal. When the process engineers use VSI control procedure, frequent switching between different sampling intervals can be a complicating factor. However, average number of samples to signal (ANSS), which is the amount of required samples to signal, and average time to signal (ATS) do not provide any control statistics about switching performances of VSI charts. In this study, we evaluate numerical switching performances of multivariate VSI EWMA chart including average number of switches to signal (ANSW) and average switching rate (ASWR). In addition, numerical study has been carried out to examine how to improve the performance of considered chart with accumulate-combine approach under several different smoothing constant and sample size. In conclusion, process engineers, who want to manage the correlation coefficients of related quality variables, are recommended to make sample size as large and smoothing constant as small as possible under permission of process conditions.

• Journal of the Korean Data and Information Science Society
• /
• 제20권4호
• /
• pp.741-747
• /
• 2009

Properties of multivariate Shewhart and EWMA (Exponentially Weighted Moving Average) control charts for monitoring variance-covariance matrix of quality variables are investigated. Performances of the proposed charts are evaluated for matched fixed sampling interval (FSI) and variable sampling interval (VSI) charts in terms of average time to signal (ATS) and average number of samples to signal (ANSS). Average number of swiches (ANSW) of the proposed VSI charts are also investigated.

• 산업경영시스템학회지
• /
• 제18권33호
• /
• pp.143-151
• /
• 1995

In this design the sampling interval that each sampling time changes according to the valuse of the previous to sample statistics, sample mean and ranges. The VSI scheme uses large sample if the sample statistics appear near in side the control limits and smaller sample otherwise. The efficiency of the VSI scheme is compare to the FSI. It is shown that VSI control chart improves the confidence of the procedure and performens better than FSI control chart.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.53-57
• /
• 1990

This paper propose Constant Frequency CR-PWM VSI. In which ON/OFF output of Hystersis comparator, which compares the amplitude of reference current with that of actual current, control the switching elements with a constant sampling period of $\mu$-processor. Speed control system of BLDCM driven by controller wi th CF CR - PWM VSI was built.

• 품질경영학회지
• /
• 제25권3호
• /
• pp.62-73
• /
• 1997

Previous VSI control chart works have been done on quality variable whose distribution is normal. But there are many situations in which hte assumption of not a, pp.opriate. Also, in many industrial processes, the interest is to monitor the number of defectives. In this paper, we will take the existing properties of VSI control chart developed for the normal distribution and a, pp.y them to the np-chart based on the discrete binomial distribution. We will consider the CUSUM chart for the number of defectives. Here, the interesting object is to compute the VSI ATS for CUSUM control chart using Markov chain a, pp.oach and to compare FSI ATS and VSI ATS.

• 전자공학회논문지B
• /
• 제28B권12호
• /
• pp.38-50
• /
• 1991

A current-controlled scheme of pulse width modulation voltage source inverter (PWM VSI) has attracted considerable attention due to its fast response with current limit and especially suitable for potentially high performance applications such as AC motor drives and UPS systems. These features yield near-sinusoidal currents in the load with reduced current peaks, lower inverter switching frequency and reduce inverter and load stresses. A high performance current-controlled inverter must have a quick response in transient state and low harmonic current in steady state. This paper compares and shows the controlled-characteristics with hysteresis controller(HC), ramp comparison controller(RCC) and predictive controller(PC) of PWM inverter to control actual current of VSI-IM.

• 품질경영학회지
• /
• 제35권2호
• /
• pp.37-44
• /
• 2007

Today, the statistical process control (SPC) in manufacture environment is an important role at the process by the productivity improvement of the manufacturing systems. The control chart in this statistical method is widely used as an important statistical tool to find the assignable cause that provoke the change of the process parameters such as the mean of interest or standard deviation. But the traditional SPC don't grasp the change of process according to the points fallen the near control limits because of monitoring the variance of process such as the fixed sampling interval and the sample size and handle the cost of the aspect of these sample point. The control chart can be divided into the statistical and economic design. Generally, the economic design considers the cost that maintains the quality level of process. But it is necessary to consider the cost of the process improvement by the learning effects. This study does the economic design in the VSI $\bar X$ control chart and added the concept of loss function of Taguchi in the cost model. Also, we preyed that the VSI $\bar X$ control chart is better than the FSI $\bar X$ in terms of the economic aspects and proposed the standard of the process improvement using the VSI $\bar X$ control chart.