• The Journal of the Acoustical Society of Korea
• /
• 제12권1E호
• /
• pp.39-47
• /
• 1993

2-Dimension IIR 디지털 필터를 시스토릭 어레이 구조로 실현하는 방법을 보였다. 시스토릭 어레이는 1-D IIR 디지털 필터로 부분 실현한 후 종속연결하여 구현하였다. 부분 실현한 시스토릭 어레이의 종속 연결은 신호 지연에 사용되는 요소를 감소 시킨다. 여기서 1-D 시스토릭 어레이는 local communication 접근에 의해 DG를 설계한후 SFG로의 사상을 통해 유도하였다. 유도된 구조는 매우 간단하며, 입력 샘플이 공급되어지면 매 샘플링 기간마다 새로운 출력을 얻는 매우 높은 데이터 처리율을 갖는다. 2-Dimension IIR 디지털 필터를 시스토릭 어레이로 실현함으로써 규칙적이고, modularity, local interconnection, 높은 농기형 다중처리의 특징을 갖기 때문에 VLSI 실현에 매우 적합하다. 또한 PE셀의 승산기 설계에서는 modified Booth's 알고리즘과 Ling's 알고리즘에 기초를 두고 고도의 병렬처리를 행할수 있도록 설계하였다.

• ETRI Journal
• /
• 제29권1호
• /
• pp.79-88
• /
• 2007

This paper proposes a novel concept of adjusting the hardware size in a multi-carrier code division multiple access (MC-CDMA) receiver in real time as per the channel parameters such as delay spread, signal-to-noise ratio, transmission rate, and Doppler frequency. The fast Fourier transform (FFT) or inverse FFT (IFFT) size in orthogonal frequency division multiplexing (OFDM)/MC-CDMA transceivers varies from 1024 points to 16 points. Two low-power reconfigurable radix-4 256-point FFT processor architectures are proposed that can also be dynamically configured as 64-point and 16-point as per the channel parameters to prove the concept. By tailoring the clock of the higher FFT stages for longer FFTs and switching to shorter FFTs from longer FFTs, significant power saving is achieved. In addition, two 256 sub-carrier MC-CDMA receiver architectures are proposed which can also be configured for 64 sub-carriers in real time to prove the feasibility of the concept over the whole receiver.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.375-378
• /
• 2000

This paper discusses on application of meta-heuristic algorithms such as the genetic algorithm (GA) and the simulated annealing (SA) to the LSI module placement. We propose useful crossover method for improving of searching capability in genetic algorithm. By using our proposed crossover method, we have been able to keep good schemata in the chromosome and the variety of the solution. From the experimental results, we have obtained better result than the simulated annealing method by starting from the initial placement of the min-cut method.

• 전기학회논문지P
• /
• 제52권4호
• /
• pp.141-147
• /
• 2003

Security of the electronic commercial transaction especially through the mobile communication network is gaining its significance due to rapid development of information and communication related fields. For that, some kind of cryptographic algorithm is already in use for the smart card. However, the growing needs of handling multimedia and real time communication bring the smart card into more stringent use of its resources. Therefore, we proposed a hybrid cryptosystem of the smart card to facilitate multimedia communication and real time communication.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2206-2208
• /
• 1998

The modular Lateral Information Propagation Networks(LIPN) has been designed. The LIPN has shown to be useful for interpolation of information[3]. The problem is the fact that only the small number of nodes can be implemented in a IC chip with the circuit VLSI technology. The proposed modular architecture is for enlarging the neural network through inter module connections. For such inter module connections, the host(computer or logic) mediates the exchange of information among modules. Also border nodes in each module have capacitors for temporarily retaining the information from outer modules. The LIPN with $4{\times}4$ modules has been designed and simulation of interpolation with the designed LIPN has been done.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2470-2472
• /
• 1998

In this paper, we proposed the method to improve the performance of Viterbi decoder by applying Concatenated structure. Proposed decoder for Concatenated Code is designed with inner Viterbi decoder, block deinterleaver and outer Viterbi decoder. Inner Viterbi decoder (K=7, R=1/2) has 8-level soft decision, but outer decoder (K=7, R= 1/2) has 2-level hard decision. Applied interleaving scheme make decoder to have better BER performance in Concatenated code. The designed VLSI shares inner decoder with outer decoder. Because of sharing structure, complexity of decoder can be reduced to half. But it required about twice clock speed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.575-578
• /
• 1998

In this paper, we propose a VLSI architecture of Reed-Solomon decoder. Our goal is the development of an architecture featuring parallel and pipelined processing to improve the speed and low power design. To achieve the this goal, we analyze the RS decoding algorithm to be used parallel and pipelined processing efficiently, and modified the Euclid's algorithm arithmetic part to apply the parallel structure in RS decoder. The overall RS decoder are compared to Shao's, and we show the 10% area efficiency than Shao's time domain decoder and three times faster, in addition, we approve the proposed RS decoders with Altera FPGA Flex 10K-50, and Implemeted with LG 0.6{\mu}$ processing.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2016년도 추계학술대회
• /
• pp.129-130
• /
• 2016

본 논문에서는 다중 입력의 크기를 비교하기 위한 알고리즘 및 VLSI 구조를 제안한다. 제안하는 알고리즘은 여러 입력을 동시에 비교한 후에 간단한 디지털 논리 함수를 이용하여 그 입력들 중에서 가장 큰 값(혹은 가장 작은 값)을 검출하는 방법을 제공할 수 있다. 이 방식의 단점은 하드웨어 자원이 증가하는 것인데, 이를 위해 중복된 논리 연산을 재사용하는 방법도 제안한다. 제안하고자 하는 방식은 회로 속도의 증가, 즉 지연시간의 감소에 초점을 맞추었다. 제안한 비교 알고리즘은 HDL로 설계한 후에 Magna Chip의 $0.18{\mu}m$ CMOS 라이브러리를 이용하여 구현하였다. 제안한 비교방법은 전통적인 방식에 비해서 4 및 8 입력인 경우에 약 0.5 및 1.1배 만큼 하드웨어 자원을 더 소비하면서, 약 1.5 및 1.8배 만큼 동작 주파수를 향상시킬 수 있었다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권6호
• /
• pp.403-408
• /
• 2005

As the increasing integrity of VLSI, the BIST(Built-In Self Test) is used as an effective method to test chips. Generally the pseudo-random test pattern generation is used for BIST. But it requires too many test patterns when there exist random This paper proposes and presents a new efficient network architecture for Reflective Memory System (RMS). A time to copy shared-data among nodes effects critically on the entire performance of the RMS. In this paper, the recent researches about the RMS are investigated and compared. The device named Topology Conversion Switch(TCS) is introduced to realize the proposed network architecture. One of the RMS based industrial control networks, Ethernet based Real-time Control Network (ERCnet), is adopted to evaluate the performance of the proposed network architecture for RMS.

• 한국정보처리학회논문지
• /
• 제6권3호
• /
• pp.766-772
• /
• 1999

With the increase of portable system and high-density IC, power consumption of VLSI circuits is very important factor in design process. Power estimation is required in order to estimate the power consumption. A simple and correct solution of power estimation is to use circuit simulation. But it is very time consuming and inefficient way. Probabilistic method has been proposed to overcome this problem. Transition density using probability was an efficient method to estimate power consumption using BDD and Boolean difference. But it is difficult to build the BDD and compute complex Boolean difference. In this paper, we proposed Propowest. Propowest is building a digraph of circuit, and easy and fast in computing transition density by using modified COP algorithm. Propowest provides an efficient way for power estimation.