• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.541-545
• /
• 2014

Rec. ITU-R M.1842-1 is international recommendation for VHF band communication guideline in maritime mobile service RR Appendix 18 channels. In this paper, we simulate 28.8 kbps VHF ${\pi}$/4-DQPSK digital baseband modem compatible with the recommendation, then it is designed and implemented with FPGA. Cazac sequence is used as a preamble since packet format is not defined untill now in the recommendation. Baseband modem is designed by VHDL language and implemented on NEXYS4 development platform having Atrix7 FPGA chip from Xilinx. For wireless communication test of total prototype system, ADC/DAC board is implemented and EV9730 RF module is utilized. From the experimental results, implemented FPGA modem shows spectral bandwidth of 25 kHz and successful data exchanges between tx and rx communication platform.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.256-260
• /
• 2005

For the structure of AVLS is required to the GPS-MDT for realtime acquisition the position reporting of vehicle and traffic management S/W. It is necessary that the MODEM using VHF transceiver base on GPS and monitoring program for display base on GIS the traffic status by vehicles position report in management system. The other wise, vehicles among management system that is required the automatic communications protocol for GPS information and mobile's ID. In this paper have studied the VHF modem for transmission the voice and data at same time and S/W for management system using GIS-tool.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.473-478
• /
• 2015

In this paper, we suggest a flexible multiband antenna which can be equipped on an inflatable life-jacket. The antenna can send distress alert and location data of survivors to assist rescue operation when crew or people are in distress. The antenna operate in three frequency bands such as VHF-DSC band (156MHz), COSPAS-SARSAT band (406MHz) and GPS band (1,575MHz). The GPS band is implemented with a square ring-slot planar antenna, the COSPAS-SARSAT band and the VHF-DSC band antenna is implemented by monopole type. In order to give flexibility of substrate to be equipped on life-jacket, FR4-epoxy substrate of thickness 0.2mm is used to make antenna. The reflection coefficients of the fabricated antenna are -8.8dB, -20.4dB and -10.7dB at each bandwidth like VHF-DSC, COSPAS-SARSAT and GPS band, respectively, when people are wearing life-jacket integrated multiband antenna.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.529-534
• /
• 2002

It was recommended for all ship engaged in international voyages to carry the dedicated Digital Selective Calling receiver, DSC equipment, VHF transceiver, etc according to Global Maritime Distress & Safety System. Also International Maritime Organization recommended for navigation and communication equipments to applicate the EMC regulations, therefore most of electronic equipments using in the vessel to be faced with problems to cope with new regulations. This study has applied and analyzed the EMC for an equipment integrated with Ch.70 dedicated DSC receiver, DSC equipment, VHF transceiver and groped for solutions to cope with. The test has applied the electromagnetic interference such as the measurement for unwanted emissions from conductive & radio emission and the electromagnetic susceptibility such as the immunity from voltage, frequency variation and electro static discharge, hence comes to be understand the problems related with the power and the earth.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.403-408
• /
• 2015

A text-based communication system has been developed with a communication function on AIS and display and input function on ECDIS as a way to complement voice communication. It features no linguistic error and is not affected by VHF restrictions on use and noise. The text communication system is designed to use messages for clear intentions and further improves convenience of users by using various UI through software. It works without additional hardware installation and modification and can transmit a sentence by selecting only via Message Banner Interface without keyboard input and furthermore has a advantage to enhance processing speed through its own message coding and decoding. It is determined as the most useful alternative to reduce language limitations and recognition errors of the user and solve the problem of various voice communications on VHF. In addition, it will help to prevent collisions between ships with decrease in VHF use, accurate communication and request of cooperation based on text at heavy traffic areas.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2642-2648
• /
• 2010

The design of coupling and rectifying circuits for the maritime VHF digital modem is investigated in this paper. To monitor the transmitting power of the modem, a directional coupler which is used to extract a small fraction of the transmitter signal power, and a rectifying circuit which make DC voltage proportional to the coupled rf power are designed and fabricated. The parallel-coupled line coupler with directivity of above 25 dB at 160 MHz bands is designed and it is shown that the output voltage of the rectifying circuit is linearly changing from 0.85 V to 1.6 V when the transmitting power of the modem is varying from 1 W to 25 W. The proposed coupler and rectifying circuits are expected to be suitable for maritime VHF digital modem.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.8
• /
• pp.2736-2750
• /
• 2022

As demands for the maritime communications increase, a variety of functions and information are required to exchange via elements of maritime systems, which leads communication traffic increases in maritime frequency bands, especially in VHF (Very High Frequency) band. Thus, effective resource management is crucial to the future maritime communication systems not only to the typical terrestrial communication systems. VHF data exchange system (VDES) enables to utilize more flexible configuration according to the communication condition. This paper focuses on the VDES communication system among VDES terminals such as shore stations, ship stations and aids to navigation (AtoN) to address efficient resource allocation. We propose a resource management method considering a MIMO (Multiple Input Multiple Output) technique in VDES, which has been widely used for modern terrestrial wireless networks but not for marine environments by scheduling the essential communication resources. We introduce the general channel model in marine environment and give two metrics, spectral and the energy efficiencies to examine our resource scheduling algorithm. Based on the simulation results and analysis, the proposed method provides a possibility to enhance spectral and energy efficiencies. Additionally, we present a trade-off relationship between spectral and energy efficiencies. Furthermore, we examine the resource efficiencies related to the imperfect channel estimation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.6
• /
• pp.681-688
• /
• 2016

Several VHF bands for the use in analog communications has been changed to those for the use in new maritime digital communications by WRC-12. ITU-R M. 1842-1 has been also standardized, recommending the characteristics of maritime digital communication systems. In addition, a Shipborne Ad-hoc Network (SANET) has been introduced by IMO in order to provide ships, which cannot be connected to a shore directly, with maritime digital data exchange services with the help of ad-hoc communication. In this paper, several functionalities of the SANET, including channel access, route determination to a shore, and data exchange, are verified via sea trials. It is expected that the SANET can be applicable to collecting and analyzing maritime information, facilitating the entry and departure of vessels, and the communication infrastructure of e-navigation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1457-1467
• /
• 2015

Depending on the type of Tx-Rx pairs, VHF Data Exchange System (VDES) for maritime communication is expected to employ the different frequency channels. Load imbalance between the different channels turns out to be a critical problem for the multi-hop communication using Ad-hoc Self-Organizing TDMA (ASO-TDMA) MAC protocol, which has been proposed to provide the connectivity between land station and remote ship stations. In order to handle the inter-channel load imbalance problem, we consider a model of the stochastic geomety in this paper. After analyzing the spatial reuse efficiency in each hop region by the given model, we show that the resource utility can be maximized by balancing the inter-channel traffic load with optimal resource allocation in each hop region.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1999-2007
• /
• 2017

In this paper, we implement a multi-band network selection (MNS) system based on Linux operating system which determines the optimal communication link for given network conditions among the available LTE, very high frequency (VHF), and high frequency (HF). The implemented software consists of a network interface, an MNS server, and a user GUI. We perform indoor test to verify the function of the implemented MNS system using two sets of MNS system. To this end, two types of VHF communication links that follow ITU-R M.1842-1 Annex 1 and Annex 4 are emulated in software. In addition, the HF transmission (reception) port of one MNS is directly connected to the HF reception (transmission) port of another MNS. We demonstrate through indoor tests that the implemented MNS system can support seamless maritime communication service in spite of artificial disconnection or re-connection of LTE, VHFs, and HF. The implemented MNS system is applicable to various maritime communication services including e-navigation.