• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.4
• /
• pp.1575-1579
• /
• 2014

Background: There is a close relationship between Helicobacter pylori (H pylori)-specific factors and different gastroduodenal diseases. The present study aimed to investigate the prevalence of vacA d1, d2 genotypes in the H pylori isolates from patients with gastric adenocarcinoma, peptic ulcer disease (PUD) and gastritis in East Azerbaijan region, where the incidence of gastric cancer (GC) is high. Strains isolated from this area are likely to be of European ancestry. Materials and Methods: In this study, genotyping of the vacA d region of 115 isolates obtained from patients with different gastrodoudenal diseases was accomplished by PCR methods. In addition to PCR amplification of H pylori 16S rDNA, rapid urease tests or histological examination were used to confirm the presence of H pylori in biopsy specimens. Data were collected and analyzed using SPSS version 19. Results: Of the total of 83 H pylori isolates, 36 (43.4%) contained the d1 allele and 47 (56.6%) were subtype d2. The results of the multiple linear/logistic regression analysis showed high correlation between allele d1 and gastric adenocarcinoma or PUD. Conclusions: This study suggests that the H pylori vacA d1 genotype helps predict risk for gastric adenocarcinoma and PUD in East Azerbaijan, Iran.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.610-620
• /
• 2000

Vinyl acetate (VAc) was polymerized at 30, 40, and 5$0^{\circ}C$ using 2,2'-azobis (2,4-dimethylvaleronitrile) (ADMVN) and tertiary butyl alcohol (TBA) as the initiator and the solvent, respectively. High molecular weight (HMW) atactic poly(vinyl alcohol) (PVA) was prepared by saponifying the poly(vinyl acetate) (PVAc) synthesized. The effect of polymerization conditions were investigated in terms of conversion, degree of branching for acetyl group of PVAc, and molecular weight of both PVAc and PVA. The polymerization rate of VAc in TBA was proportional to the 0.49th power of ADMVN concentration in good accordance with the theoretical value of 0.5. HMW-PVA with high yield could be obtained successfully, probably due to lower polymerization temperature and decreased chain transfer reaction rate which was achieved by adopting ADMVN and TBA. PYAc having average degree of polymerization (P$_{n}$) of 10000~13000 was obtained at the conversion of 35~70%. Saponification of so prepared PVAc yielded PVA having P$_{n}$ of 2400~6100. The syndiotactic diad content increased with decreasing polymerization temperature and increasing VAc concentration due to a steric hindrance effect of TBA during polymerization.

• Archives of Plastic Surgery
• /
• v.45 no.1
• /
• pp.45-50
• /
• 2018

Background Free muscle flaps are a mainstay for reconstruction of distal third leg wounds and for large lower extremity wounds with exposed bone. However a major problem is the significant postoperative flap swelling, which may take months to resolve. We studied the efficacy and safety of immediate application of a vacuum assisted closure (VAC) dressing after a free muscle flap to the lower extremity. Methods Over a 19 months period, all consecutive free muscle flaps for lower extremity reconstruction at a Level I trauma center were evaluated prospectively for postoperative flap thickness, complications and flap survival. Immediate application of a VAC dressing was performed in 9 patients, while the flap was left exposed for monitoring in 8 patients. Results There was no statistically significant difference in flap survival between both cohorts. Mean flap thickness at postoperative day 5 for the VAC group was $6.4{\pm}6.4mm$, while flap thickness for the exposed flap group was $29.6{\pm}13.5mm$. Flap thickness was significantly decreased at postoperative day 5 for the VAC dressing group. Conclusions Immediate application of VAC dressing following free muscle flaps to the lower extremity does not compromise flap survival or outcomes and results in decreased flap thickness and a better aesthetic outcome.

• Natural Product Sciences
• /
• v.9 no.3
• /
• pp.158-160
• /
• 2003

Polyacetylenes were isolated from Panax ginseng C.A. Meyer (Family Araliaceae), and their inhibitory effects on growth, infection and VacA vacuolation of Helicobacter pylori (HP) were investigated. Ginseng polyacetylenes did not inhibit the infection of HP into KATO cells. However, polyacetylenes inhibited HP growth and vacuolation of Hela by VacA toxin. Panaxytriol showed the most potent inhibition with $IC_{50}$ values of 0.05 and 0.046 mg/ml, respectively.

• Journal of Microbiology
• /
• v.44 no.6
• /
• pp.660-664
• /
• 2006

The relationship between H. pylori clarithromycin resistance and genetic pattern distribution has been differently explained from different geographic areas. Therefore, we aimed to assess the clarithromycin resistance rate, to evaluate the bacterial genetic pattern, and to search for a possible association between clarithromycin resistance and cagA or vacA genes. This prospective study enrolled 62 consecutive H. pylori infected patients. The infection was established by histology and rapid urease test. Clarithromycin resistance, cagA and vacA status, including s/m subtypes, were assessed on paraffin-embedded antral biopsy specimens by TaqMan real time polymerase chain reaction (PCR). Primary clarithromycin resistance was detected in 24.1 % of cases. The prevalence of cagA was 69.3%, and a single vacA mosaicism was observed in 95.1 % cases. In detail, the s1m1 was observed in 23 (38.9%) patients, the s1m2 in 22 (37.2%), and the s2m2 in 14 (23.7%), whereas the s2m1 combination was never found. The prevalence of cagA and the vacA alleles distribution did not significantly differ between susceptible and resistant strains. Primary clarithromycin resistance is high in our area. The s1m1 and s1m2 are the most frequent vacA mosaicisms. There is no a relationship between clarithromycin resistance and bacterial genotypic pattern and/or cagA positivity.

• Journal of Gastric Cancer
• /
• v.2 no.1
• /
• pp.12-19
• /
• 2002

Purpose: The H. pylori cagA gene, vacA gene and iceA gene are considered to be important virurence factors that have been implicated in the development of gastric adenocarcinoma. It was reported that the presence of IS605 elements may be responsible for rearrangements and lead to partial or total deletions of the cag pathogenicity island (PAI) and the virulence of cag PAI may be changed. However, different results regarding the association between these virulence factors and clinical disease have been reported from different geographic regions. This study evaluated the relationship between H. pylori virulence factors such as cagA, vacA, iceA, IS605 and gastric adenocarcinoma. Materials and Methods: H. pylori isolates were obtained from 54 infected patients (24 cases of gastric adenocarcinoma, 30 cases of control). H. pylori isolates were identified by PCR with ureC gene and 16S rRNA. PCR was performed to examine cagA, vacA, iceA and IS605 genotypes. Results: Significant difference was found in the negative rates of cagA between gastric adenocarcinoma group and control ($62.5\%\;vs.\;33.3\%$ P=0.033). No significant difference was found in the prevalence of iceA, vacA between gastric adenocar cinoma and control. The genotype of cagA+ vacA s1-m1 iceA1 was predominant in H. pylori isolates irrespective of the clinical outcome. IS605 in PAI was not found in gastric adenocarcinoma gruop and control. The positive rates of IS605 in genome were $33.3\%$ in gastric adenocarcinoma group and $36.7\%$ in control (P>0.05). In gastric carcinoma, the positive rate of $cagA^{+}/IS605$ was lower than in control ($12.5\%\;vs\;40.0\%$, P=0.025) and the positive rate of cagA-/IS605 was higher than in control ($54.2\%\;vs\;23.3\%$, P=0.02). Conclusion: H. pylori virulence factors had not related significantly with gastric adenocarcinoma. Further study is needed to examine the specificity of H. pylori strains.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.3
• /
• pp.368-379
• /
• 2021

Two virulence factors of Helicobacter pylori, cagA and vacA, have been known to play a role in the development of severe gastric symptoms. However, they are not always associated with peptic ulcer or gastric cancer. To predict the disease outcome more accurately, it is necessary to understand the risk of severe symptoms linked to other virulence factors. Several other virulence factors of H. pylori have also been reported to be associated with disease outcomes, although there are many controversial descriptions. H. pylori isolates from Koreans may be useful in evaluating the relevance of other virulence factors to clinical symptoms of gastric diseases because the majority of Koreans are infected by toxigenic strains of H. pylori bearing cagA and vacA. In this study, a total of 116 H. pylori strains from Korean patients with chronic gastritis, peptic ulcers, and gastric cancers were genotyped. The presence of virulence factors vacAs1c, alpA, babA2, hopZ, and the extremely strong vacuolating toxin was found to contribute significantly to the development of severe gastric symptoms. The genotype combination vacAs1c/alpA/babA2 was the most predictable determinant for the development of severe symptoms, and the presence of babA2 was found to be the most critical factor. This study provides important information on the virulence factors that contribute to the development of severe gastric symptoms and will assist in predicting clinical disease outcomes due to H. pylori infection.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.25-28
• /
• 2002

비공역형 단량체인 비닐아세테이트(VAc)는 공역형 비닐계 단량체와 달리 라디칼의 활성이 너무 커서 중합 도중 빈번한 연쇄이동반응과 정지반응에 의해 분지구조의 고분자가 얻어지며 고분자량의 폴리비닐아세테이트를 얻기가 어려운 것으로 알려져 있다. 폴리비닐알코올(PVA)은 비닐알코을 단량체의 호변이성질화 때문에 단량체의 직적중합에 의해서는 얻을 수 없고 일반적으로 비닐아세테이트(VAc)를 라디칼 중합하여 얻어진 폴리비닐아세테이트(PVAc)를 비누화하여 합성한다. (중략)

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.242-243
• /
• 2012

In this paper, 200 W power supply for LED driver has been designed, analyzed, simulated and tested. Input AC voltage of 100VAC-240VAC was converted to DC voltage by high power factor converter. Output voltage was controlled, and output current was controlled by constant current when output current was reached to LED maximum rated current. By simulation and experimental test, voltage and current control and high power factor characteristics are verified.

• 프린팅코리아
• /
• s.48
• /
• pp.97-97
• /
• 2006