• Journal of the Korean Vacuum Society
• /
• v.11 no.3
• /
• pp.151-158
• /
• 2002

Fabricated were ultra-shallow $p^+-n$ junctions on n-type Si(100) substrates using decaborane $(B_{10}H_{14})$ ion implantation. Decaborane ions were implanted at the acceleration voltages of 5 kV to 10 kV and at the dosages of $1\times10^{12}\textrm{cm}^2$.The implanted specimens were annealed at $800^{\circ}C$, $900^{\circ}C$ and $1000^{\circ}C$ for 10 s in $N_2$ atmosphere through a rapid thermal process. From the measurement of the implantation-induced damages through $2MeV^4 He^{2+}$ channeling spectra, the implanted specimen at the acceleration voltage of 15 kV showed higher backscattering yield than those of the bare n-type Si wafer and the implanted specimens at 5 kV and 10 kV. From the channeling spectra, the calculated thicknesses of amorphous layers induced by the ioin implantation at the acceleration voltages of 5 kV, 10 kV and 15 kV were 1.9 nm, 2.5 nm and 4.3 nm, respectively. After annealing at $800^{\circ}C$ for 10 s in $N_2$ atmosphere, most implantation-induced damages of the specimens implanted at the acceleration voltage of 10 kV were recovered and they exhibited the same channeling yield as the bare Si wafer. In this case, the calculated thickness of the amorphous layer was 0.98 nm. Hall measurements and sheet resistance measurements showed that the dopant activation increased with implantation energy, ion dosage and annealing temperature. From the current-voltage measurement, it is observed that leakage current density is decreased with the increase of annealing temperature and implantation energy.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.199-201
• /
• 2003

Because of Korean power system characteristics and increasing power demand, the need of 765kV transmission line is growing gradually. Now a days, KEPCO's 765kV transmission line has been tested and stands for commercial operation. During the first stage, 765kV transmission line will be operated with two voltage grades of 765kV and 345kV, which results the unbalance of power system. So unbalanced current such as zero sequence current flows in the transmission line. In this paper, we describes the simulation study of 765/345kV parallel transmission line by using EMTDC program.

• Journal of the Chungcheong Mathematical Society
• /
• v.26 no.1
• /
• pp.221-229
• /
• 2013

We show that if X is a space such that ${\beta}QF(X)=QF({\beta}X)$ and each stable $Z(X)^{\sharp}$-ultrafilter has the countable intersection property, then there is a homeomorphism $h_X:vQF(X){\rightarrow}QF(vX)$ with $r_X={\Phi}_{vX}{\circ}h_X$. Moreover, if ${\beta}QF(X)=QF({\beta}X)$ and $vE(X)=E(vX)$ or $v{\Lambda}(X)={\Lambda}(vX)$, then $vQF(X)=QF(vX)$.

• Applied Biological Chemistry
• /
• v.37 no.5
• /
• pp.370-378
• /
• 1994

Soybean curd added with 40% of cow’s milk was prepared with eight coagulants such as calcium acetate, calcium lactate, calcium chloride, calcium sulfate, magnesium chloride, glucono-delta lactone (GDL), acetic acid and lactic acid. The curd products were evaluated by the chemical composition, coprecipitation porperties, mineral content, yield, color and textural characteristics. The lowest concentrations for protein coprepitation were 0.3% (v/v) for calcium salts, 0.4% (v/v) for magnesium chloride, 0.2% (v/v) for organic acids. Turbidity and crude protein of whey were markedly decreased at these concentrations. The optimal concentrations of coagualnts used for soybean curd preperation were 1.2% (v/v) for calcium acetate, calcium sulfate and calcium lactate, 1.0% (v/v) for calcium chloride and GDL, 0.8% (v/v) for magnesium chloride and lactic acid, 0.6% (v/v) for acetic acid. It was observed that of the eight coagulants tested, calcium chloride provided a satisfactory curd in quality. Calcium content of soybean curds by the calcium salt coagulants was higher than that by organic acid coagulants. Through the examination on the textural properties by a texturemeter was found out that acetic acid treated soybean curd among the organic acids, calcium salts and magnesium chloride treated curds had very high hardness value. All the curd products prepared in this experiment had a pale yellow color as affected by the value of L (lightness), a (redness) and b (yellowness). Although the colorimetric readings showed that the soybean curds prepared with the organic acids had higher L value but lower a and b value in comparison to calcium salts and magnesium chloride treated curds.

• Journal of fish pathology
• /
• v.22 no.1
• /
• pp.23-33
• /
• 2009

Vibrio harveyi was a significant pathogenic agent and cause a high mortality of cultured fish and shrimp in the aquaculture industry. In this study, we have investigated biochemical, physiological, serological and immunological characteristics of V. harveyi isolated from marine cultured fish. The phenotypes of V. harveyi were differentiated with their own biochemical characteristics and colors of colony on the TCBS agar. V. harveyi were classified into more than four serogroups by agglutination test. Most isolates were classified into a group A which is categorized with the same band pattern generated by western blotting. Group A was characterized by a major protein, which is ranged from 26 and 34 kDa in size, and has a virulence to oliver flounder more than reference strain KCCM40866. Oliver flounders vaccined with FKC of V. harveyi C05011 were highly resistant to infection by other strains of group A.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.3
• /
• pp.148-151
• /
• 2017

This research concerns field rings for 3.3kV planar gate power insulated-gate bipolar transistors (IGBTs). We design an optimal field ring for a 3.3kV power IGBT and analyze its electrical characteristics according to field ring parameters. Based on this background, we obtained 3.3kV high breakdown voltage and a 2.9V on state voltage drop. To obtain high breakdown voltage, we confirmed that the field ring count was 23, and we obtained optimal parameters. The gap distance between field rings $13{\mu}m$ and the field ring width was $5{\mu}m$. This design technology will be adapted to field stop IGBTs and super junction IGBTs. The thyristor device for a power conversion switch will be replaced with a super high voltage power IGBT.

• Journal of Ginseng Research
• /
• v.40 no.1
• /
• pp.47-54
• /
• 2016

Background: The roots of Panax ginseng contain noble tetracyclic triterpenoid saponins derived from dammarenediol-II. Dammarene-type ginsenosides are classified into the protopanaxadiol (PPD) and protopanaxatriol (PPT) groups based on their triterpene aglycone structures. Two cytochrome P450 (CYP) genes (CYP716A47 and CYP716A53v2) are critical for the production of PPD and PPT aglycones, respectively. CYP716A53v2 is a protopanaxadiol 6-hydroxylase that catalyzes PPT production from PPD in P. ginseng. Methods: We constructed transgenic P. ginseng lines overexpressing or silencing (via RNA interference) the CYP716A53v2 gene and analyzed changes in their ginsenoside profiles. Result: Overexpression of CYP716A53v2 led to increased accumulation of CYP716A53v2 mRNA in all transgenic roots compared to nontransgenic roots. Conversely, silencing of CYP716A53v2 mRNA in RNAi transgenic roots resulted in reduced CYP716A53v2 transcription. HPLC analysis revealed that transgenic roots overexpressing CYP716A53v2 contained higher levels of PPT-group ginsenosides ($Rg_1$, Re, and Rf) but lower levels of PPD-group ginsenosides (Rb1, Rc, $Rb_2$, and Rd). By contrast, RNAi transgenic roots contained lower levels of PPT-group compounds and higher levels of PPD-group compounds. Conclusion: The production of PPD- and PPT-group ginsenosides can be altered by changing the expression of CYP716A53v2 in transgenic P. ginseng. The biological activities of PPD-group ginsenosides are known to differ from those of the PPT group. Thus, increasing or decreasing the levels of PPT-group ginsenosides in transgenic P. ginseng may yield new medicinal uses for transgenic P. ginseng.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.5 s.176
• /
• pp.1124-1132
• /
• 2000

Viscoplastic response and densification behaviors of Ti-6AI-4V powder compacts under uniaxial compression are studied at room and high temperatures with various initial relative densities and strain rates. The yield function and strain-hardening law proposed by Kim and co-workers were implemented into a finite element program (ABAQUS) to compare experimental data with finite element calculations for porous Ti6A14V powder compacts. Displacement-relative density, displacement-load relations and deformed geometry of Ti-A14V powder compacts were compared with finite element results. Density distributions in Ti-6AI-4V powder compacts were also measured and compared with finite element results.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.2
• /
• pp.87-100
• /
• 2008

A total of 792 CCD images of V523 Cas were obtained on four nights of Jan. 2003 with the bvri CCD photometric system attached to a 61cm reflector of Sobaeksan Optical Astronomy Observatory (SOAO). The 17 standard stars in the images were used to establish transformation relations between our bvri system and the standard Johnson-Cousins BVRI system. We derived the tentative equations of transformation between two photometric systems as follows; V=v-0.0689(B-V)+0.0063, B-V=1.3197(b-v)-0.1733, V-R=0.9210(v-r)-0.1309, R-I=0.8892(r-i)-0.1055. Using these equations standard V magnitudes and their color indexes (B-V, V-R, R-I) for 57 stars in the field of the image were determined.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.63-69
• /
• 2017

This paper presents a highly efficient power management system for UAV-drones. For free from the battery cell-balancing issue, the proposed system allows the drone to utilize a single-cell Li-Po battery. To realize low-voltage input of 3.7V, the switch-mode step-up DC-DC converter is optimally designed with high power efficiency. The prototype DC-DC converter was implemented with an output voltage of 5V, which will be provided to digital parts of the drone. The power efficiency was measured to be max. 91.3% with low surface temperature. The measured line and load regulations were 0.02V/V and 0.15V/A, respectively. Thanks to the proposed power management system, the available time-to-fly of the drone is expected to be significantly extended in virtue of the enhanced power efficiency.