• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.693-696
• /
• 2001

Ketoprofen racemate is very useful pharmaceutical intermediate, but the hardness of separation to each enantiomer is most a barrier to apply pharmaceutical industry. To overcome this difficulty, we would like to separate S-ketoprofen from ketoprofen racemate. To design suitable mobile phase, hexane and t-BME(tri-buthyl-methyle-ether) were used to elute peaks of ketoprofen racemate separately. When the ratio of hexane/t-BME/acetic acid was 60/40/0.1(%v/v), each component was separated successfully. In order to separate large amount of S-ketoprofen, sample concentration was increased from 100ppm to 2000ppm. In this case, resolution was decreased due to the overlapping of peaks(1.65${\rightarrow}$0.94).

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.249-252
• /
• 1998

ETSI(European Telecommunications Standards Institute) 300 34701, ITU-T(International Telecommunication Union) G.965 recommended PSTN, CONTROL, LINK CONTROL, BCC, PROTECTION protocols on V-Interfaces. But it is possible to occur misalignment between LE(Local Exchange) and AN(Access Network), especially in link identification procedure because there isn't any comment about V5.2 system management. In this paper we propose S/W guard timer to improve reliability in V5.2 link identification procedure in scope of Recommendation.

• Bulletin of the Korean Mathematical Society
• /
• v.46 no.3
• /
• pp.499-510
• /
• 2009

For a Borel function ${\psi}:\mathbb{R}{\times}\mathbb{R}{\rightarrow}\mathbb{R}$ satisfying the functional equation $\psi$ (s + t, u + v) + $\psi$(s - t, u - v) = $2\psi$(s, u) + $2\psi$(t, v), we show that it satisfies the functional equation $$\psi$$(s, t) = s(s - t)$$\psi$$(1, 0) + $$st\psi$$(1, 1) + t(t - s)$$\psi$$(0, 1). Using this, we prove the stability of the functional equation f(ax + ay, bz + bw) + f(ax - ay, bz - bw) = 2abf(x, z) + 2abf(y,w) in Banach modules over a unital $C^*$-algebra.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.40-47
• /
• 2001

The structural dependence of the performance of an 1.55 $1.55{\mu}m$ InGaAsPIInGaAsP MQW electro-absorption modulator for highspeed digital fiber communication was systematically investigated. The effects of n-doped SCH region length $t_n$ as well as the general structure parameters including quantum well number $N_w$, well-thickness $t_w$, detuning wavelength $\Delta\lambda$, and device length L were thoroughly analyzed. Thereby, a high-pelfoIDlance electro-absorption modulator with device length L of $100{\mu}m$ was successfully designed. The designed structure showed excellent characteristics that have residual loss less than -1.5 dB, operational voltage from 0 V to -2V, and extinction ratios of -2.92 dB at $V_{\alpha}$=-1 V and -10 dB at $V_{\alpha}$=-2V.X>=-2V.

• IMMUNE NETWORK
• /
• v.5 no.1
• /
• pp.23-29
• /
• 2005

Background: Interleukin-7 receptor (IL-7R) ${\alpha}$-deficient mice have small numbers of B cells and ${\alpha}{\beta}$T cells in periphery, they totally lack ${\gamma}{\delta}$T cells. In addition, the V-J recombination and transcription of TCR ${\gamma}$ genes is also severely impaired in IL-7R ${\alpha}$-deficient mice. Stat5, a signaling molecule of the IL-7R, induces germline transcription in the TCR ${\gamma}$ locus, and promotes V-J recombination and ${\gamma}{\delta}$T cell development. However, the roles for IL-7R signaling pathway in thymic or extrathymic ${\gamma}{\delta}$T cell development are largely unknown. Methods: To clarify the role of the IL-7 receptor in proliferation and survival of ${\gamma}{\delta}$T cells, we introduced the TCR ${\gamma}{\delta}$ transgene, $V_{{\gamma}2}/V{\delta}_5$, into IL-7R ${\alpha}$-deficient mice, and investigated the development of ${\gamma}{\delta}$T cells. Results: We found that $V_{{\gamma}2}/V{\delta}_5$ transgene restored ${\gamma}{\delta}$T cells in the epithelium of the small intestine (IEL) but not in the thymus and the spleen. Further addition of a bcl-2 transgene resulted in partial recovery of ${\gamma}{\delta}$T cells in the thymus and the spleen of these mice. Conclusion: Taken together, this study revealed that the IL-7R ${\alpha}$ is indispensable for proliferation and survival mainly in thymic ${\gamma}{\delta}$T cell development.

• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.366-369
• /
• 2008

To evaluate the performance of a bipolar packed bed cell (BPBC) filled with granular aluminium, the experiments were carried out in two groups as batch and continuous processes. In a batch process, removal efficiency of total phosphate (T-P) was 88% in case of electrolytic treatment of phosphate solution, T-P 10 mg/L at 6 V during 3 h by BPBC filled with granular aluminium. In a continuous process, residual T-P concentration was about 2 mg/L in case of electrolytic treatment of phosphate solution, 10 mg/L at 6 V, HRT 3 h by BPBC filled with granular aluminium. Break-through point was observed after running for 120 h at hydraulic retention time (HRT) of 3 h.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.793-798
• /
• 2016

In this work, the memory window characteristics of vertical nanowire device with asymmetric source and drain was analyzed using bipolar junction transistor mode for 1T-DRAM application. A gate-all-around (GAA) MOSFET with higher doping concentration in the drain region than in the source region was used. The shape of GAA MOSFET was a tapered vertical structure that the source area is larger than the drain area. From hysteresis curves using bipolar junction mode, the memory windows were 1.08V in the forward mode and 0.16V in the reverse mode, respectively. We observed that the latch-up point was larger in the forward mode than in the reverse mode by 0.34V. To confirm the measurement results, the device simulation has been performed and the simulation results were consistent in the measurement ones. We knew that the device structure with higher doping concentration in the drain region was desirable for the 1T-DRAM using bipolar junction mode.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.3
• /
• pp.235-242
• /
• 2018

The objective of the paper is to investigate the effect of mix designing factors on the workability and rheological parameters of self compacting concrete in order to facilitate the difficulties of quality control of high sensitivity of SCC. Mix proportions of SCC were prepared with various conditions of coarse, and fine aggregate, and unit water content, and the SCC mixtures were tested on workability, rheological properties to provide basic data for quantitative evaluation. Test results indicated that the yield stress of SCC decreased with increasing the coarse aggregate volume ratio, and increased with increasing the amount of VMA. However, unit water content, fine aggregate type, and air content didn't affect the yield stress value. The plastic viscosity according to the mixing factors showed a similar tendency to the yield stress. In addition, there was no correlation between yield stress and workability (flow, T50, V-lot). However, there was closely correlation among plastic viscosity and T50 and V-lot. Especially, T50 and V-lot time decreased with decreasing plastic viscosity.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.2
• /
• pp.54-58
• /
• 2004

This paper presents the iron core design method of a high temperature superconducting (HTS) transformer considering voltages per turn (V/T). In this research, solenoid type HTS coils were selected for low voltage (LV) winding and double pancake coils for high voltage (HV) winding, just as in conventional large power transformers. V/T is one of the most fundamental elements used in designing transformers, as it decides the core cross sectional area and the number of primary and secondary winding turns. By controlling the V/T, the core dimension and core loss can be changed diversely. The leakage flux is another serious consideration in core design. The magnetic field perpendicular to the HTS wire causes its critical current to fall rapidly as the magnitude of the field increases slowly. Therefore in the design of iron core as well as superconducting windings, contemplation of leakage flux should be preceded. In this paper, the relationship between the V/T and core loss was observed and also, through computational calculations, the leakage magnetic fields perpendicular to the windings were found and their critical current decrement effects were considered in relation to the core design. The ％ impedance was calculated by way of the numerical method. Finally, various models were suggested.

• Korean Journal of Crystallography
• /
• v.13 no.1
• /
• pp.36-40
• /
• 2002

The order-disorder phase transition of (Fe/sub 0.61/Ni/sub 0.39/)₃V alloy that is annealed at various temperatures and time conditions was sty(lied with the examination of long-range order parameter(S) by using neutron diffraction method. As a result, the structure of the sample annealed at 680℃ for 94 h was not changed; that is, it existed iii perfect disordered state and showed face-centered cubic structure. Otherwise, samples which were annealed at temperature below 640℃ showed the value of long-range order parameter with 0 < S < 1 and phase transition into simple cubic structure partly. It was found that the annealed sample at 465℃ for 144 h is the most approximated to the thermal equilibrium state from the S-T/T/sub c/ related equation of Cowley.