• Current Research on Agriculture and Life Sciences
• /
• v.31 no.2
• /
• pp.139-147
• /
• 2013

This study analyzed agricultural water distribution systems for the utilization of water demand-oriented water supply systems. Three major TM/TC(telemeter/telecontrol) districts of agricultural water management were selected for analyzing the characteristics of the water distribution systems. In addition, the characteristics of the water supply systems for general water supply zones based on irrigation facilities were also investigated, along with the case of special water management during the drought season. As a result, high annual and monthly variations were observed for the water supply facilities, including the reservoirs and pumping stations. In particular, these variations were more obvious during the drought season, depending on the type of facility. The operations of the pumping stations and weirs were more sensitive to the stream levels than the reservoirs, and the smaller reservoirs were influenced more than the larger reservoirs. Therefore, a water-demand-oriented water supply system should consider the existing general practices of water management in the agricultural sector, and focus on achieving a laborsaving system rather than water conservation in the case of reservoirs. Equal water distribution from the start to the end point of irrigation channels could be an effective solution for managing pumping stations.

• Journal of Korea Multimedia Society
• /
• v.8 no.1
• /
• pp.119-127
• /
• 2005

Each university in Korea has connected its campus network to outer network with a variety methods since every year KREN adopted an open bid in selecting a network service company. In particular many universities connected two or more outer networks have faced more complex decision problems about their network operations due to the intricacy of the networks. So, those university needs the system which helps the managers to select the optimum operating method for their campus networks. In this paper, campus network traffic efficiency based on utilization was analyzed using the manager's answers to the questions for traffic management. And, by the result of analysis, the link strategy to outer networks was suggested for the universities running simultaneously two outer networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1501-1518
• /
• 2016

This paper presents an effective management of VM (Virtual Machine) for heterogeneous cloud using Common Deployment Model (CDM) brokering mechanism. The effective utilization of VM is achieved by means of task scheduling with VM placement technique. The placements of VM for the physical machine are analyzed with respect to execution time of the task. The idle time of the VMis utilized productively in order to improve the performance. The VMs are also scheduled to maintain the state of the current VM after the task completion. CDM based algorithm maintains two directories namely Active Directory (AD) and Passive Directory (PD). These directories maintain VM with proper configuration mapping of the physical machines to perform two operations namely VM migration and VM roll back. VM migration operation is performed from AD to PD whereas VM roll back operation is performed from PD to AD. The main objectives of the proposed algorithm is to manage the VM's idle time effectively and to maximize the utilization of resources at the data center. The VM placement and VM scheduling algorithms are analyzed in various dimensions of the cloud and the results are compared with iCanCloud model.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.2
• /
• pp.17-26
• /
• 2022

In this paper, we propose a novel method of performing convolutional operations on a 2-D Processing Element(PE) array. The conventional method [1] of mapping the convolutional operation using the 2-D PE array lacks flexibility and provides low utilization of PEs. However, by mapping a convolutional operation from a 2-D PE array to a 1-D PE array, the proposed method can increase the number and utilization of active PEs. Consequently, the throughput of the proposed Deep Convolutional Neural Network(DCNN) accelerator can be increased significantly. Furthermore, the power consumption for the transmission of weights between PEs can be saved. Based on the simulation results, the performance of the proposed method provides approximately 4.55%, 13.7%, and 2.27% throughput gains for each of the convolutional layers of AlexNet, VGG16, and ResNet50 using the DCNN accelerator with a (weights size) x (output data size) 2-D PE array compared to the conventional method. Additionally the proposed method provides approximately 63.21%, 52.46%, and 39.23% power savings.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.188-198
• /
• 2013

In order to increase its performance, NAND flash memory-based storage is composed of data buses that are shared by a number of flash memories and uses a parallel technique that can carry out multiple flash memory operations simultaneously. Since the storage performance is strongly influenced by the performance of each data bus, it is important to improve the utilization of the bus by ensuring effective scheduling of operations by the storage controller. However, this is difficult because of dynamic changes in buses due to the unique characteristics of each operation with different timing, cost, and usage by each bus. Furthermore, the scheduling technique for increasing bus utilization may cause unanticipated operation delay and wastage of storage resource. In this study, we suggest various dynamic operation scheduling techniques that consider data bus performance and storage resource efficiency. The proposed techniques divide each operation into three different stages and schedule each stage depending on the characteristics of the operation and the dynamic status of the data bus. We applied the suggested techniques to the controller and verified them on the FPGA platform, and found that program operation decreased by 1.9% in comparison to that achieved by a static scheduling technique, and bus utilization and throughput was approximately 4-7% and 4-19% higher, respectively.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.3 s.43
• /
• pp.400-411
• /
• 1993

The aim of this study is to analyze the variations among hospitals and hospital groups in resource use and procedures of diagnostic and therapeutic process, such as laboratory tests, radiologic examinations, tissue diagnosis, timing of surgery after admission, the time required for operation. The study was performed for five procedures including cesarean section (C/S), appendectomy, cholecystectomy, cataract extraction, and pediatric pneumonia. The 2,316 subjects were selected from medical insurance claims list, and from this list 413 cases were sampled for medical record review. The patterns of resource utilization and process of treatment were described according to hospitals and characteristics of hospital groups. The major results were as follows : 1. The numbers of laboratory and radiologic tests showed significant difference among hospitals and hospital groups. In case of hospital groups, we could find tendencies of more tests with increasing hospital bed size. 2. In general, the proportion of operative cases evaluated by tissue diagnosis postoperatively among all operations ranged from 28.3% to 100%. The proportion varied among hospital groups, of which general hospital A group(more than 15 specialty) showed the highest proportion. 3. Post-admission delay until operation and the time required for operative procedure were not invariable among hospitals and hospital groups. The duration of operation in tertiary hospitals was slightly shorter than general hospitals, with varying statistical significance. We could find that probably there were differences of quality among hospitals in some components of procedures, which suggested that the implementation of quality assurance activities would be mandatory. In this study, we simply described the patterns of resource utilization and some features of clinical process, with institution of the need for advanced studies with in-depth analyses for each component of diagnosis and treatment procedures.

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.574-581
• /
• 2019

The present study analyzed the productivity and cost of winching operations for evaluating the efficiency of a tractor-attached winch in a Pinus densiflora thinning site located in the Yangyang County of Gangwon-do. The mean yarding distance and mean timber volume were 29 m and 0.15 ㎥, respectively. In the 95 cycles of yarding operations, the uphill and downhill yarding operations constituted 51% and 49%, respectively, of the total yarding operations. The productivity of the uphill yarding operation was 2.28 ㎥/h, and the productivity of the downhill yarding operation was 1.89 ㎥/h. The findings of this study revealedthat productivity would increase by 0.5 ㎥/h when the rate of utilization of the machine is increased to 80% by reducing the operational delay time. The cost of the downhill yarding operation was 44,116 KRW/㎥, whereas that of the uphill yarding operation was 53,369 KRW/㎥. The difference in cost resulted from the difference in the number of yarding stems (stems/cycle). Furthermore, the results of the multiple linear regression equation developed for predicting the yarding operation times showed that productivity was significantly affected by working conditions such as yarding distance (m), the number of stems per cycle (stems/cycle), and the terrain slope (%) in the uphill and downhill yarding operations. Further research is required for developing an accurate prediction model equation according to a yarding direction.

• Land and Housing Review
• /
• v.14 no.2
• /
• pp.83-95
• /
• 2023

The purpose of this study is to improve the private utilization of military welfare facilities that are aging or underutilized in urban areas. It also aims to develop ways to strengthen cooperative win-win strategies between the military and local communities. The use of military welfare facilities by the private sector refers to activities where the private sector generates additional benefits or added value by allowing the use of these facilities, including both private use and improvements to facilities or development of land through private sector involvement. From the perspective of the city and the locals, military welfare facilities are perceived as resident-friendly and excellent urban resources that can promote reciprocal satisfaction between the military and local communities. From the perspective of the military, military welfare facilities are important for enhancing the welfare of military personnel. However, they often face limitations in providing various welfare services due to the aging of facilities and limited operations with a single purpose. The improvement of private utilization of military welfare facilities will bring diverse reciprocal benefits to the military, the city, and the locals. Above all, improving the private utilization of military welfare facilities can help the military and local communities jointly address diverse urban issues. To establish cooperative governance and find flexible and diverse development strategies that can promote the welfare of the military and enhance the quality of life for the locals, it is important that both the military and local communities make continuous efforts.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.2
• /
• pp.253-263
• /
• 2008

This study examined the menu management and utilization of cooking equipment at school foodservice operations in the Chonbuk area. Self-administered questionnaires were collected from a total of 193 school dietitians. Statistical data analysis was completed using the SPSS v. 11.5 program. The results are summarized as follows. Among the 193 schools, 58.5% were elementary schools and 41.5% were middle and high schools. Approximately 97% of the schools prepared meals in the conventional manner. Among the school, 68.4% had a menu cycle of 1${\sim}$2 weeks. The frequency of using convenience foods was significantly different between the elementary schools and middle and high schools(p<0.001). Approximately 45% of the dietitians responded that the most important details for menu planning were menu variety and consumer preference. However, 66.8% of the dietitians responded that a key problem for menu planning was limited and worn-out kitchen equipment. Although the cost of purchasing cooking equipment is high, most dietitians responded they have high needs for equipment in order to meet of the quantity demands of food production. In terms of utilized cooking equipment, most schools had mixers, vegetable cutters, choppers, dish washers, etc. Yet the amenities most often lacking were meat slicers, composting machines, ovens, and griddles. In utilizing the cooking equipment, there was no significant difference between the dietitians in the elementary(3.67) schools and those in the middle and high school foodservice systems(3.70); however, the utilization level was poor. Therefore, governmental regulatory agencies should review and finance support for purchasing cooking equipment. Finally, purchasing analysis was conducted regarding the dietitians' opinions on menu recipes and useful equipment.

• Journal of the Korean Home Economics Association
• /
• v.46 no.2
• /
• pp.51-58
• /
• 2008

The purpose of this study was to analyze how the appreciation or recognition of quick response systems, with the utilization of technology, can improve operations for businesses in the DongDaeMoon fashion market. A survey was conducted from April 25 to May 10 in 2007, among owners and designers of wholesale shops in the DongDaeMoon fashion market. Data was collected from 270 subjects, and general descriptive and comparative statistical analysis was applied to acquire various parameters. Firstly, the product types within the DongDaeMoon fashion market were small and medium quantity batch production systems. The majority of businesses adopted the production strategy of outsourcing through subcontracted factories. To re-order, a fashion merchandising required 2 to 3 days. Secondly, the design sources of fashion merchandises were national fashion brands, popular items within the same industries, and also fashion magazines. New products was made within 4 days after a sample item was received. Business acquaintances were fashion retail shops of DongDaeMoon, and internet or home shopping companies. Thirdly, the recognition of importance and effects of quick response systems was difference between high and low group of the utilization of technology in the DongDaeMoon fashion market.