• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.13-22
• /
• 2015

Purpose : We investigated the safety of Intrabeam$^{TM}$ system, X-ray unit for Intraoperative Radiotheray (IORT) by measuring surface dose using Optically Stimulated Luminescent Dosimeter(OSLD). Materials and Methods : 30 patients were selected, who were in breast cancer patients and had an operation of breast conserving surgery (BCS). At the inner surface of tumor bed, 20 Gy were described, and 5 Gy at 1cm depth from the inner surface. Along the size of tumor bed which could be decided after resection of tumor, the size of applicator were determined. Usual treatment time were from 18 to 40 minutes. For the measurement of surface doses, OSLD were placed at superior(U1,2), inferior(D1,2), lateral(L1,2) and medial(M1,2) directions from the center of applicator. Each direction, two OSLD were placed at 0.5 cm and 1.5 cm from the center. Mean, maximum, and minimum doses were analyzed to be compared. Results : Mean values were U1 $2.23{\pm}0.80Gy$, U2 $1.54{\pm}0.53Gy$, D1 $1.73{\pm}0.63Gy$, D2 $1.25{\pm}0.45Gy$, L1 $1.95{\pm}0.82Gy$, L2 $1.38{\pm}0.42Gy$, M1 $2.03{\pm}0.70Gy$, and M2 $1.51{\pm}0.58Gy$. Maximum values were 4.34 Gy at U1, and Minimum values were 0.45 Gy at M2. 13.3 % of patient (4pts out of 30) were reported that surface dose were over 4 Gy. Conclusion : The fact that skin dose of all patients were less than 5 Gy based on OSLD measurement showed the safety of Intrabeam$^{TM}$ system. In the relatively small breast volume, the tendency that surface dose was increased had been shown, which was analyzed by the data of patients who irradiated over 4Gy at skin surface. Therefore, for appropriate indication for IORT, it is suggested that breast volume as well as the size and position of tumor should be carfully considered.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.10
• /
• pp.2575-2583
• /
• 1998

The productionof the highly relible softwae systems and theirs performance evaluation hae become important interests in the software industry. The software evaluation has been mainly carried out in ternns of both reliability and performance of software system. Software reliability is the probability that no software error occurs for a fixed time interval during software testing phase. These theoretical software reliability models are sometimes unsuitable for the practical testing phase in which a software error at a certain testing stage occurs by causes of the imperfect debugging, abnornal software correction, and so on. Such a certatin software testing stage needs to be considered as an outlying stage. And we can assume that the software reliability does not improve by means of muisance factor in this outlying testing stage. In this paper, we discuss Bavesian software reliability growth modeling and estimation procedure in the presence of an imidentitied outlying software testing stage by the modification of Jehnski Moranda. Also we derive the Bayes estimaters of the software reliability panmeters by the assumption of prior information under the squared error los function. In addition, we evaluate the proposed software reliability growth model with an unidentified outlying stage in an exchangeable model according to the values of nuisance paramether using the accuracy, bias, trend, noise metries as the quantilative evaluation criteria through the compater simulation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.1
• /
• pp.75-85
• /
• 2016

Pectin, a naturally occurring polysaccharide, has in recent years attracted considerable attention. Its benefits are increasingly appreciated by scientists and consumers due to its safety and usefulness. The chemistry and gel-forming characteristics of pectin have enabled to be used in pharmaceutical industry, health promotion and treatment. Yet, it has been rarely used in cosmetics because of its incompatibility with many cosmetic ingredients, including alcohols, and unstable viscosity of pectin gels under various pH and salt conditions. However, low-molecular-weight pectin oligomers have excellent biological activities, and depolymerization of pectin to produce cosmetic ingredients would be very useful. In this study, we attempted the development of cosmetic ingredients using pectin with an excellent effect on human skin. We developed a bio-conversion process that uses enzymatic hydrolysis to produce pectin hydrolysates containing mainly low-molecular-weight pectin oligomers. Gel permeation chromatography was used to determined the ratio of hydrolysis. The molecular weight of the pectin hydrolysates obtained varied between 200 and 2,700 Da. The two newly developed low-molecular-weight pectin hydrolysates, LMPH A and B, had higher anti-oxidative activities than pectin or D-galacturonic. Exposure to UVB radiation induces apoptotic cell death in epidermal cells. Annexin V binding and propidium iodide uptake were measured by flow cytometry to evaluate UVB-induced cell death in HaCaT cells. Both LMPH A and B reduced UVB-induced cell death and increased cell proliferation by 22% and 30% at 0.5% concentration respectively, while pectin had no significant activity. In conclusion, this study suggests that the newly developed low-molecular-weight pectin hydrolysates can be used as safe and biologically active cosmetic ingredients.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.4
• /
• pp.331-339
• /
• 2014

This study is aimed to provide the primary data about safety of cosmetics products using indirect preference of korean cosmetics customer and numerical comparison of applied area. For this study, we collected 9,879 cosmetics products which were inspected in cosmetics research team from January, 2010 to December, 2012. The domestic cosmetics was 645 cases (6.5%) and Imported cosmetics was 9,234 cases (93.5%). As manufacturing country, the France has 4,342 cases (44.0%) and the next ranking were like those, Germany 1,637 cases (16.6%), U.S.A 1,476 cases (14.9%), Republic of Korea 645 cases (6.5%), Italy 557 cases (5.6%), and etc 1,222 cases (12.4%). By the year, the cases of test cosmetics have decreased from 3,784 cases (2010), 3,394 cases (2011) to 2,701 cases (2012), the relative ratio of common cosmetics part was drop in but the other group (functional cosmetics and hair dye related products) was increased. The largest market share product was Skin care 5,470 cases (55.4%) and the next order was like those, Make up 1,908 cases (19.3%), Hand & Foot 1,026 cases (10.4%), Hair Care 616 cases (6.2%), Bath 361 cases (3.7%), and etc 498 cases (5.0%). In domestic cosmetics, the greatest proportion was Skin care and the others were Hair Care > Makeup > Hand & Foot > Bath, but the proportion was evidently changed in imported cosmetics, Skin care > Makeup > Hand & Foot > Hair Care > Bath. It is necessary to set the priority of the international quality standards to identify trends from domestic consumers directly or indirectly. Compare the ratio of category and human application parts from domestic and imported cosmetics, we utilize leverage as the basis for future-oriented cosmetic safety.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.79-86
• /
• 2017

This study is related to a lamellar liquid crystal make-up cleansing formulation with a hologram-like unique appearance between two polarizing plates. Make-up cleansing formulations with a lamellar liquid crystal phase have been extensively studied for a long time, but there have been limitations in practical commercialization because of increasing turbidity and viscosity. In this study, to solve this problem, alkyl chains of surfactants were modified to increase the fluidity of the liquid crystal phase, and electrostatic repulsion force was increased by introducing anionic surfactant. The lamellar liquid crystal make-up cleansing formulation which introduced anionic surfactants can easily inhibit crystallization through electrostatic repulsion force, thereby showing excellent stability overtime, maintaining transparent appearance and viscosity. In addition, we have newly introduced an in vitro cleansing evaluation method using fluorescent material and in vivo imaging system (IVIS) for objective and quantitative cleansing ability evaluation. The excellent cleansing ability of lamellar liquid crystal cleansing formulation has been confirmed by newly developed evaluation method. On the other hand, when lamellar liquid crystal make-up cleansing formulation was placed between orthogonally arranged two polarizing plates, a specific pattern like a hologram can be observed. This phenomenon is presumably interpreted as the interference between the visible light passing through the liquid crystal formulation and the lamellar structure. The lamellar structure of cleansing formulation was confirmed by SAXS analysis, exhibiting Bragg spacing ratio of 1 : 2. The lamellar liquid crystal make-up cleansing formulation prepared in this study would be useful for future application in make-up cleansing due to its excellent stability, cleansing ability, and unique hologram-like pattern placed between two polarizing plates.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.5
• /
• pp.1175-1184
• /
• 2014

Fermented anchovy of the favorite sea food in Korea made from anchovy (Engraulis japonica) and salt. The study was undertaken to investigate the effects of different retorting conditions on the quality of canned salt-fermented anchovy fillet. The salt fermented anchovy fillet was prepared by fermenting anchovy(Engraulis japonica) with salt(15%) at $5^{\circ}C$ for 15 days and then cold air drying the fermented fillet for 1 hour. The dried fermented anchovy fillet(85g) was filled with olive oil(60g) into can(301-1) and seamed using a vacuum seamer, and then sterilized at Fo 9 and 11 mins in a steam system retort at 12 $1^{\circ}C$, respectively. After sterilization with different heating conditions, the pH, VBN, amino-N, color value (L, a, b), texture profile, TBA value, sensory evaluation and viable bacterial count of the canned salt-fermented anchovy fillet were measured. In both sterilized cans, the viable bacterial counts were not detected. There was no remarkable difference in physicochemical and sensory quality between sterilization conditions. The results showed that sterilization of Fo 9 min was more desirable than that of Fo 11 min to prepare canned salt-fermented anchovy fillet.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.1
• /
• pp.95-106
• /
• 2008

Pickled crabs made using Charybdis japonica are becoming part of our dietary habits. Yet research on this food is disappointingly scarce. It is generally accepted that the original food composition of pickled crabs defies scrutiny because various seasonings are added to soy for the production of pickled crabs in most regions. Accordingly, this study attempted to measure the food composition of the Charybdis japonica preserved in brine according to different storage days (10, 15, 20, 25, and 30 days) and different temperatures ($5{^{\circ}C}$, $15{^{\circ}C}$, and ambient temperature). It was found that Charybdis japonica is comprised of moisture (77.5％), ash (2.3％), crude protein (19.7％), and crude lipid (0.5％). The content of crude protein and crude lipid during the storage period tended to decrease over time.

• Journal of radiological science and technology
• /
• v.39 no.2
• /
• pp.135-142
• /
• 2016

The purpose of this study is to evaluate propriety of using SID 180cm at Chest PA examination and to find effect of geometrical cause to the image. XGEO-GC80, INNOVISION-SH, CXDI-40EG detector and a chest phantom designed self-production was used for this study. Images were acquired at SID 180cm with changing the factor OID as 0, 75 and 83mm and were analyzed by Centricity Radiography RA1000 PACS system. Statistical program was used the SPSS (Version 22.0, SPSS, Chicago, IL, USA), p-value(under 0.05) was considered to be statistically significant. In OID 0 mm was enlarged about 2.7~3.5 mm than the actual degree of the HS, BS of phantom in all equipments. Compared with the calculated magnification has been expanded 1.6~2.8% when viewed. The OID 75 mm with OID 83 mm was extended from the CS and BS 6~8 mm range. Compared to the calculated values, the measured values are expanded from 6.1 to 7.9%. CS and BS according to the OID change showed a statistically significant difference (p<0.05) among each group, the post-analysis only OID 0 mm group appeared as an independent group, 75 mm and 83 mm are separated in the same group It was. But had no statistically significant difference could change depending on the OID (p>0.05), post-mortem analysis showed, both in the same group. Heart sizes appears larger than actual size 6~8 mm at chest PA examination which is enlarged 6.1~7.9% more than the actual theoretical value. We can find magnification of the image because of the increase of the OID due to technical limitations between cover of standing detector and the image plate. so we suggest to have occurred between them when considering the need to adjust the equipment installed by the SID to match the characteristics of the equipment.

• Journal of radiological science and technology
• /
• v.39 no.2
• /
• pp.237-246
• /
• 2016

This study is therefore aimed at measuring the surface dose rate and the spatial dose rate in and outside the radionuclide facility in order to ensure safety of the patients, radiation workers and family care-givers in their use of such equipment and to provide a basic framework for further research on radiation protection. The study was conducted at 4 restrooms in and outside the radionuclide facility of a general hospital in Incheon between May 1 and July 31, 2014. During the study period, the spatial contamination dose rate and the surface contamination dose rate before and after radiation use were measured at the 4 places-thyroid therapy room, PET center, gamma camera room, and outpatient department. According to the restroom use survey by hospitals, restrooms in the radionuclide facility were used not only by patients but also by family care-givers and some of radiation workers. The highest cumulative spatial radiation dose rate was 8.86 mSv/hr at camera room restroom, followed by 7.31 mSv/hr at radioactive iodine therapy room restroom, 2.29 mSv/hr at PET center restroom, and 0.26 mSv/hr at outpatient department restroom, respectively. The surface radiation dose rate measured before and after radiation use was the highest at toilets, which are in direct contact with patient's excretion, followed by the center and the entrance of restrooms. Unsealed radioactive sources used in nuclear medicine are relatively safe due to short half lives and low energy. A patient who received those radioactive sources, however, may become a mobile radioactive source and contaminate areas the patient contacts-camera room, sedation room, and restroom-through secretion and excretion. Therefore, patients administered radionuclides should be advised to drink sufficient amounts of water to efficiently minimize radiation exposure to others by reducing the biological half-life, and members of the public-family care-givers, pregnant women, and children-be as far away from the patients until the dose remains below the permitted dose limit.

• Korean Security Journal
• /
• no.62
• /
• pp.255-276
• /
• 2020

The mandatory police system, which plays a pivotal role in securing security and securing social safety as a security assistant, is expected to face difficulties in supplying the mandatory police manpower and securing absolute police manpower in the future according to the Ministry of Defense's abolition of the conversion service system. In this situation, this study intends to provide a concrete plan to replace the mandatory police officers as security assistants, recruiting contractors from civilians who are not military service resources or regular police officers, and using them for security assistance. More ultimately, this study goes beyond securing obligatory police to reduce or abolish mandatory police, which has been dealt with in previous studies. It aims to present the rescue and operation directions so that the police can provide quality public security services. In order to achieve the purpose of this study, this study 1) analyzes the current situation of police personnel, derives the necessity and justification of securing the police personnel or increasing the number of police personnel due to changes in security demand and security environment, and 2) After discussing the necessity and direction of reorganization, 3) deriving policy implications through analysis of foreign cases operating similar systems to derive specific plans for the introduction of security contractors for private contract workers in Korea. This study reviewed the specific operation plan and legal and institutional maintenance plan of private contract workers. In order to achieve these research objectives, this study 1) analyzes the current status of the police manpower and derives the necessity and justification of securing an absolute police manpower or increasing the manpower of the police in response to changes in security demand and security environment, and the current security aid system. 2) After discussing the necessity and orientation of reorganization of exinsting system of assistant police officer, 3) derive policy implications through analysis of foreign cases utilizing security aids similar to Korea, and 4) The specific operation plan and legal and institutional maintenance plan were presented. including security aids for private contract workers in Korea, from recruitment procedures to activities.