• Journal of Korean Home Economics Education Association
• /
• v.20 no.1
• /
• pp.101-116
• /
• 2008

Most who were polled stated that they use the internet everyday. Also, it is undeniable that Internet has become one of the popular shopping markets with the spatial-convenience and time-saving it provides. With the growth of Internet and Internet shopping malls, effects on clothing purchasing of adolescents. The purpose of this study was to investigate the clothing shopping orientation and Internet clothing purchasing type of high school students. Subjects were 685(male 354, female 331) high school students located in Jeollabukdo province. In this statistical analysis, SPSS 11.5 for Windows Program. These data were analyzed by factor analysis, $x^2$ test, t-test, One-way Anova, Duncan' multiple range, Pearson's correlation coefficient. The results of this study were as follows. Six dimensions of clothing shopping orientation were derived by factor analysis: fashion hedonic shopping brand ostentation time convenience economic esthetics orientation. The clothing purchasing type in Internet had 3 factors(convenience active impulse buying economic pursuit). The groups were significantly different in regard to clothing shopping orientation, clothing purchasing type in Internet shopping mall according to demographic variables(gender, educational background of parents, a school record). Clothing shopping orientation variables had positive correlations except of hedonic shopping economic orientation with clothing purchasing type in Internet. As a conclusion, high school students' shopping orientation and purchasing type of apparel in Internet shopping mall constituted important characteristics which could affect directly Internet purchase behavior of adolescents. These results should be fundamental information for clothing and textile education in secondary school.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.208-221
• /
• 2007

The fracture toughness test is believed as a clinically relevant method for assessing the fracture resistance of the dentinal restoratives. The objectives of this study were to measure the fracture toughness $(K_{1C})$ and microtensile bond strength of dentin-resin composite interface and compare their relationship for their use in evaluation of the integrity of the dentin-resin bond. A minimum of six short-rod specimens for fracture toughness test and fifteen specimens for microtensile bond strength test was fabricated for each group of materials used. After all specimens storing for 24 hours in distilled water at $37^{\circ}C$, they were tensile-loaded with an EZ tester universal testing machin. Statistical analysis was performed using ANOVA and Tukey's test at the 95% confidence level, Pearson's coefficient was used to verify the correlation between the mean of fracture toughness and microtensile bond strength. FE-SEM was employed on fractured surface to describe the crack propagation. Fracture toughness value of Clearfil SE Bond (SE) was the highest, followed by Adper Single Bond 2 (SB), OptiBond Solo (OB), ONE-STEP PLUS (0S), ScotchBond Multi-purpose (SM) and there was significant difference between SE and other 4 groups (p < 0.05). There were, however, no significant difference among SB, OB, OS, SM (p > 0.05). Microtensile bond strength of SE was the highest, followed by SB, OB, SM, OS and OS only showed significant lower value (p < 0.05). There was no correlation between fracture toughness and microtensile bond strength values. FE-SEM examination revealed that dentin bonding agent showed different film thickness and different failure pattern according to the film thickness. From the limited results of this study, it was noted that there was statistically no correlation between K1C and ${\mu}TBS$. We can conclude that for obtaining the reliability of bond strength test of dentin bonding agent, we must pay more attention to the test procedure and its profound scrutiny.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.143-150
• /
• 2012

A simulation methodology and corresponding program based on it is to be discussed for analyzing the effects of the networking operation of existing DHC system in connection with CHP system on-site. The practical simulation for arbitrary areas with various building compositions is carried out for the analysis of operational features in both systems, and the various aspects of thermal energy grids with connecting operation are highlighted through the detailed assessment of predicted results. The intrinsic operational features of CHP prime movers, gas engine, gas turbine etc., are effectively implemented by realizing the performance data, i.e. actual operation efficiency in the full and part loads range. For the sake of simplicity, a simple mathematical correlation model is proposed for simulating various aspects of change effectively on the existing DHC system side due to the connecting operation, instead of performing cycle simulations separately. The empirical correlations are developed using the hourly based annual operation data for a branch of the Korean District Heating Corporation (KDHC) and are implicit in relation between main operation parameters such as fuel consumption by use, heat and power production. In the simulation, a variety of system configurations are able to be considered according to any combination of the probable CHP prime-movers, absorption or turbo type cooling chillers of every kind and capacity. From the analysis of the thermal network operation simulations, it is found that the newly proposed methodology of mathematical correlation for modelling of the existing DHC system functions effectively in reflecting the operational variations due to thermal energy grids with connecting operation. The effects of intrinsic features of CHP prime-movers, e.g. the different ratio of heat and power production, various combinations of different types of chillers (i.e. absorption and turbo types) on the overall system operation are discussed in detail with the consideration of operation schemes and corresponding simulation algorithms.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.2
• /
• pp.86-96
• /
• 2006

Ecoclimap-1, a new complete surface parameter global database at a 1-km resolution, was previously presented. It is intended to be used to initialize the soil-vegetation- atmosphere transfer schemes in meteorological and climate models. Surface parameters in the Ecoclimap-1 database are provided in the form of a per-class value by an ecoclimatic base map from a simple merging of land cover and climate maps. The principal objective of this ecoclimatic map is to consider intra-class variability of life cycle that the usual land cover map cannot describe. Although the ecoclimatic map considering land cover and climate is used, the intra-class variability was still too high inside some classes. In this study, a new strategy is defined; the idea is to use the information contained in S10 NDVI SPOT/VEGETATION profiles to split a land cover into more homogeneous sub-classes. This utilizes an intra-class unsupervised sub-clustering methodology instead of simple merging. This study was performed to provide a new ecolimatic map over Northeast Asia in the framework of Ecoclimap-2 global database construction for surface parameters. We used the University of Maryland's 1km Global Land Cover Database (UMD) and a climate map to determine the initial number of clusters for intra-class sub-clustering. An unsupervised classification process using six years of NDVI profiles allows the discrimination of different behavior for each land cover class. We checked the spatial coherence of the classes and, if necessary, carried out an aggregation step of the clusters having a similar NDVI time series profile. From the mapping system, 29 ecosystems resulted for the study area. In terms of climate-related studies, this new ecosystem map may be useful as a base map to construct an Ecoclimap-2 database and to improve the surface climatology quality in the climate model.

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.157-175
• /
• 2012

It is difficult to evaluate the performance of process innovation of e-procurement which has large scale and complex processes. The existing evaluation methods for measuring the effects of process innovation have been mainly done with statistically quantitative methods by analyzing operational data or with qualitative methods by conducting surveys and interviews. However, these methods have some limitations to evaluate the effects because the performance evaluation of e-procurement process innovation should consider the interactions among participants who are active either directly or indirectly through the processes. This study considers the e-procurement process as a complex system and develops a simulation model based on MAS(Multi-Agent System) to evaluate the effects of e-procurement process innovation. Multi-agent based simulation allows observing interaction patterns of objects in virtual world through relationship among objects and their behavioral mechanism. Agent-based simulation is suitable especially for complex business problems. In this study, we used Netlogo Version 4.1.3 as a MAS simulation tool which was developed in Northwestern University. To do this, we developed a interaction model of agents in MAS environment. We defined process agents and task agents, and assigned their behavioral characteristics. The developed simulation model was applied to G2B system (KONEPS: Korea ON-line E-Procurement System) of Public Procurement Service (PPS) in Korea and used to evaluate the innovation effects of the G2B system. KONEPS is a successfully established e-procurement system started in the year 2002. KONEPS is a representative e-Procurement system which integrates characteristics of e-commerce into government for business procurement activities. KONEPS deserves the international recognition considering the annual transaction volume of 56 billion dollars, daily exchanges of electronic documents, users consisted of 121,000 suppliers and 37,000 public organizations, and the 4.5 billion dollars of cost saving. For the simulation, we analyzed the e-procurement of process of KONEPS into eight sub processes such as 'process 1: search products and acquisition of proposal', 'process 2 : review the methods of contracts and item features', 'process 3 : a notice of bid', 'process 4 : registration and confirmation of qualification', 'process 5 : bidding', 'process 6 : a screening test', 'process 7 : contracts', and 'process 8 : invoice and payment'. For the parameter settings of the agents behavior, we collected some data from the transactional database of PPS and some information by conducting a survey. The used data for the simulation are 'participants (government organizations, local government organizations and public institutions)', 'the number of bidding per year', 'the number of total contracts', 'the number of shopping mall transactions', 'the rate of contracts between bidding and shopping mall', 'the successful bidding ratio', and the estimated time for each process. The comparison was done for the difference of time consumption between 'before the innovation (As-was)' and 'after the innovation (As-is).' The results showed that there were productivity improvements in every eight sub processes. The decrease ratio of 'average number of task processing' was 92.7% and the decrease ratio of 'average time of task processing' was 95.4% in entire processes when we use G2B system comparing to the conventional method. Also, this study found that the process innovation effect will be enhanced if the task process related to the 'contract' can be improved. This study shows the usability and possibility of using MAS in process innovation evaluation and its modeling.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.417-428
• /
• 2011

Depending on the plastic deformation capacity required, structural steel design under the current codes can be classified into three categories: elastic, plastic, and seismic design. Most of the current steel codes explicitly forbid the use of a steel material with a yield strength higher than 450 MPa in the plastic design because of the concerns about its low plastic deformation capacity as well as the lack of test data on local and lateral torsional buckling behavior. In this study, flexural tests on full-scale H-shape members built with SM490A (ordinary steel or benchmark material) and HSB800 (high-strength steel) were carried out. The primary objective was to investigate the appropriateness of extrapolating the local buckling criterion of the current codes, which was originally developed for normal-strength steel, to the case of high-strength steel. All the SM490A specimens performed consistently with the current code criteria and exhibited sufficient strength and ductility. The performance of the HSB800 specimens was also very satisfactory from the strength perspective; even the specimens with a noncompact and slender flange developed the plastic moment capacity. The HSB800 specimens, however, showed an inferior plastic rotation capacity due to the premature tensile fracture of the beam bottom flange beneath the vertical stiffener at the loading point. The plastic rotation capacity that was achieved was less than 3 (or the minimum level required for a plastic design). Although the test results in this study indicate that the extrapolation of the current flange local-buckling criterion to the case of high-strength steel is conservative from the elastic design perspective, further testing together with an associated analytical study is required to identify the causes of the tensile fracture and to establish a flange slenderness criterion that is more appropriate for high-strength steel.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.110-139
• /
• 2020

Reclamation is the act of creating new lands by constructing dikes in offshore tidal flats to utilize them for various purposes, including the establishment of farmland to secure food for an increasing population. Based on the fact that reclamation has resulted in drastic changes in the environmental, economic, social, and cultural aspects of land expansion and development, population movement, and the formation of cities since ancient times, I reviewed the value of reclamation sites and addressed the issue of how to preserve and utilize them. "Reclamation culture" refers collectively to the recognition and concept system, behavior styles, and cultural products created by changes in the environment, and the tangible, intangible, and natural heritage generated directly and indirectly by reclamation is defined as "reclamation cultural heritage". It shows that the historical background of reclamation accords with prevailing trends, and that the reclamation sites possess cultural heritage value due to their historical, academic, and scarce characteristics. Numerous reclamation cultural heritage sites at the Gwangwhal and Gyehwa dikes are on the verge of being destroyed, with their original function having ended after the construction of Saemangeum Sea Wall. I propose measures to preserve these under the principle that utilization is based on the basic premise of conservation. First of all, modern and contemporary reclamation sites must necessarily be designated and managed as registered cultural properties, local cultural heritage, future heritage, and agricultural heritage. In particular, as it has been confirmed that reclamation sites created after the Goryeo and Joseon dynasties and the 1950s have not been designated as cultural heritage sites. It is necessary to review the characteristics and values of such reclamation sites through a full survey of national reclamation data. Effective and sustainable utilization of reclamation cultural heritage, which has not been acknowledged in the past due to its close relationship with our lives, is necessary to search for hidden stories found within that heritage, to organize governance for the efficient use of reclamation resources, and to build a museum to collect and display the history and culture of the reclaimed areas. Finally, through links with countries with experience in reclamation, we will be able to cope jointly with international issues such as those pertaining to society, culture, and environment, and would be able to implement various projects to further the advancement of human beings.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Korean Journal of Psychosomatic Medicine
• /
• v.23 no.1
• /
• pp.47-56
• /
• 2015

Objectives:The aim of this study is to investigate any differences between non-medical and medical college students for : 1) a level and the nature of perceived stress, 2) a level of life satisfaction, and 3) the related factors affecting to life satisfaction. Methods:We measured self-reported questionnaires of stress, satisfaction with life, health behavior including happiness, alcohol use, nicotine dependency and depressive symptoms in 1,714(863 non-medical and 851 medical) college students. Results:Non-medical college students had significantly higher total stress scores than medical college students(${\chi}^2$=7.66, p<.001). In non-medical college students, employment problem score was significantly higher than medical college students(t=4.07, p<.001). In medical college students, the scores of academic achievement (t=-3.81, p<.001), change of social life(t=-2.03, p<.05), death(t=-2.05, p<.05) or sickness(t=-2.60, p<.05) of friends were significantly higher than non-medical college students. And non-medical college students showed significantly lower life satisfaction scores than medical college students(${\chi}^2$=-19.05, p<.001). We also found that life satisfaction were significantly related to happiness in non-medical college students(${\beta}$=.410, $R^2$=.325, p<.001) and depressive symptoms in medical college students(${\beta}$=-.435, $R^2$=.326, p<.001) by stepwise multiple regression analysis. Conclusions:In this study, a level and the nature of perceived stress, a level of life satisfaction, and the related factors affecting to life satisfaction showed definitely differences between non-medical and medical college students. We suggest with our findings that specified mental health promotion program need for the college student's mental health management.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.60-70
• /
• 2019

Today, Deoksugung Doldam-gil, which is a well-known area in Seoul, has become a mixed place as many places reaching a critical age have been converted into parks. However, the previous research on the Deoksugung Doldam-gil was deficient in that the user, an essential variable, was not considered when assessing the place. Based on that, this study aims to analyze and interpret the perception of the places in Deoksugung Doldam-gil and to analyze factors to further enrich the place to visitors. According to the research, the representative idea of Deoksugung Doldam-gil is "the distance you want to go" and that has influencing factors, such as vehicle restrictions and the improvement of the walking environment. The analysis of classifying the variables that make up the perception of the place, physical environments, activities and meanings showed high awareness in, "streets of green (3.95)" and "stone walls of curves (3.88)." In the category of activities, "walking activities in the inner city (4.01)" and "love and romance (3.57)" were high. These results seem to reflect the spatial characteristics of the streets and the familiar image of the place were important. Five factors were extracted from the factor analysis to provide a more detailed understanding of the place perception, the correlation between each factor, and the place atmosphere of Deoksugung Doldam-gil. These factors confirmed a high correlation between 'green landscape' and 'historicity.' This can be attributed to the fact that the analysis reflects vital space, visual experience, and free walking conditions to be important, and these variables are present in urban parks. It also indicates the long-accumulated image and behavior near the site of Deoksugung Palace, including the historical and cultural heritage. It was confirmed that the factors related to the cognitive perception of Deoksugung Doldam-gil and the formation of the atmosphere of the place were strongly recognized. It found that there was a need to reflect the value and importance of 'green' in the future as culture or in the use of preservation and management related to heritage. This study presented a direction to be noted from the perspective of a user's place awareness, but considered only a fraction of the variables that affect the multidimensional sense of place and location recognition, and thus must be supplemented in the future.