• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.424-428
• /
• 1999

The simulation and experiments were conducted to anlayzed the vaiation of the temperature and humicity in the wintering beehouses which had two kinds of the insulator materials of urethane foam and sandwich panel individually . It was found that inside temperature of sandwich panel beehouse was similar to the urethane foam at the same outside temperature by the simulation results. The variation of the inside temperature and humidity for the urethane foam was less than the sandwich panel.

• 대한가정학회지
• /
• 제11권1호
• /
• pp.26-43
• /
• 1973

This study was carried out on the Sewbility of Urethane Foam usually used as coldproof lining. The Sewability was estimated with the Puckering Grade and Seam Efficiency according to the thicknes of urethane foam, fineness and material of sewing thread, and the sort of covering fabric. The result shows the following ; 1. The thick foam proportinally shows the low Puckering Grade. 2. Effect on the sewability is small in fineness of sewing thread but large in material. Especially silk thread shows the greatest sewability in foam sewing. When the material of covering fabric is same as that of sewing thread (for example ; p/c fabric and p/c thread) the sewability is excellent in special. 3. Taffeta in covering foam is not suitable to foam sewing, satin and twill show superior sewability without reagrd to the thickness of foam. 4. In case of sewing foam covered with tricot, optimum thickness of foam and fineness of sewing thread through pretest must determine. 5. The thicker foam is the better seam efficiency tends, and Seam Efficiency largely effects to the strength of the sewing thread itself. 6. The seam Efficiency can heighten with the strength of sewing thread in proportion to that of covering fabric.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.582-585
• /
• 2012

The aluminum extruded panel used for a high speed train shows the largest contribution to sound insulation performance of the train body. However, comparing with the flat panel having the same weight, the transmission loss falls sharply in the local resonance frequency band. Such fall of transmission loss can be improved by increasing the damping of local resonance. This study examines the charging effect of an urethane foam on the aluminum extruded panel of a high speed train. We charged the urethane foam with different mass density and in different way in the core part of the extruded panel. We measure the transmission loss and compare the sound insulation performance according to the density and charging method. Finally, Improvement effect of the transmission loss is compared and analysed in aspect of weight increment.

• 한국고분자학회지:고분자과학과기술
• /
• 제10권5호
• /
• pp.621-628
• /
• 1999

• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1345-1352
• /
• 2012

본 논문의 목적은 사용후핵연료 수송용기 충격완충체의 완충재질로 고려되고 있는 발사목과 우레탄 폼 심재, 그리고 샌드위치 패널에 대한 저속충격거동 및 기계적 특성을 평가하는 것이다. 우레탄 폼은 등방성 재질로써 인장, 압축, 그리고 전단의 기본물성시험을 수행하였으며, 발사목은 서로 다른 직교방향에서 다른 물성을 갖는 이방성 재료이므로 아홉가지 방향에 대한 기계적 특성 평가를 하였다. 충격시험용 심재와 샌드위치 패널 시험편은 충격시험기를 사용하여 세가지 충격에너지 레벨(1J, 3J, 그리고 5J)에 대한 저속충격시험을 수행하였다. 시험 결과, 우레탄 폼과 성장방향을 제외한 발사목은 충격에너지 흡수율, 접촉하중, 그리고 손상영역에서 유사한 거동을 보였으며, 우레탄 폼 심재는 난연성과 비용절약이 우선시 되는 설계에서 완충재질로서 추천될 수 있고, 발사목 심재는 사용후핵연료 수송용기의 경량화를 위한 완충재질로써 우선 고려될 수 있다.

• 자원환경지질
• /
• 제53권3호
• /
• pp.287-296
• /
• 2020

광해방지사업은 광산 개발로 인해 국민건강 생활에 미치는 위해요인을 분석, 제거 및 예방을 통해 지속가능한 녹색생활권 보장 및 친환경적 광산개발을 도모를 목표로 수행되고 있다. 일제강점기 및 광산개발 활황기에 개발되어 전국에 산재된 광산은 아직도 복구되지 않은 상태로 방치되고 있으며, 이런 산재된 위험으로 부터 국민안전은 물러설수 없는 최우선의 가치가 되고 있다. 광해방지사업에서 국민안전과 밀접한 사업은 응급조치이며, 이중 가장 광범위하게 사용되고 있는 공법은 지반침하방지사업과 유사하게 충전공법이다. 위험한 광산 공동 및 터널이 산악에 위치한 경우, 기존 재료로 충전 공법이 불가능하거나, 불합리한 경우가 발생가능하며, 새로운 공법의 기술개발이 필요하다. 위험한 광산 채굴지가 인접한 등산로에서 국민의 소중한 인명피해가 발생하지 않도록 응급조치사업은 안전하고 효율적으로 시행되어야 한다. 이러한 현장여건에서 우레탄 폼 재료는 하나의 대안이 될수 있다. 본 연구는 우레탄 폼 재료의 해외 광업분야 적용사례를 살펴보고, 실규모 화재 실험을 통해 광해방지사업의 응급조치을 위한 우레탄폼 재료와 복토 심도에 적용성을 실험하였다. 실험결과를 통해 약 15cm의 복토(추천 20cm 이상)로 산림화재로부터 폼 재료의 기능유지에 적정하다는 결과를 얻었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.25-26
• /
• 2023

The internal core material and external color of a sandwich panel have a significant impact on the performance of the sandwich panel. For use on roofs and walls, the internal core material and external color must be considered. Therefore, the surface and back side temperatures were measured for each exterior color and inner core material type. For the internal core materials, urethane foam and Expanded Poly Styrene(EPS), which are core materials mainly used in sandwich panels, were selected. As colors, black and ivory were selected according to brightness, and a total of five colors were selected: red, blue, and green, which are the three primary colors of light. As a result, there were differences in surface and temperature depending on the external color and type of internal core material. Regardless of the color, the temperature was measured lower for panels with urethane foam than for panels with an internal core of EPS. This is believed to have been influenced by the difference in thermal conductivity of urethane foam being 0.023W/(m·K) and that of EPS being 0.032W/(m·K). In addition, panels with a black exterior color were found to have higher surface and back temperatures than panels of other colors, and ivory-colored panels had lower back temperatures regardless of the core material. This is proportional to the brightness and light-absorbing characteristics.

• 폴리머
• /
• 제24권4호
• /
• pp.564-570
• /
• 2000

욕조 생산시 발생하는 폐 FRP와 냉장고 등 가전품과 폐단열재로부터 발생하는 폐우레탄폼을 흡음 및 경량판재로 재활용하기 위하여 불포화 폴리에스테르 매트릭스 수지에 보강하여 복합재를 제조하였다. 또한 충진제의 함량의 변화가 복합재의 기계적 물성에 미치는 영향과 기지와 보강재간의 계면현상을 관찰하였다. 충진제의 함량이 70 wt%인 복합재의 인장강도는 82.34 MPa로 가장 우수하였으며, 인장탄성율은 보강재의 함량이 증가함에 따라 감소하였다. 또한 굴곡강도와 굴곡탄성율은 폐FRP의 함량이 70 wt%충진된 복합재가 가장 우수하였으며, 그 값은 각각 72.5, 958.4 MPa이었다. SEM 관찰 결과 70 wt% 충진된 충진제 매트릭스 수지의 계면에서 pull out 현상이 확인되지 않았으며 균열도 발생하지 않았고, 매트릭스 수지내에 충진된 폐 FRP/우레탄폼 충진제가 잘 분산되어 있음을 확인할 수 있었다.

• 소음진동
• /
• 제7권5호
• /
• pp.781-787
• /
• 1997

A new method is presented to determine two fundamental acoustic quantities of sound-absorbing materials such as characteristic impedance and propagation constant. In this study, the surface acoustic impedances of sound-absorbing materials are measured using the impedance tube and the anechoic chamber to determine the above acoustic quantities. The measured results are given for two typical sound-absorbing materials(glass wool and urethane foam) int the frequency range between 150 and 1, 600 Hz. The results are verified by other two known methods, which are Smith & Parrott method and Utsuno et al. method. The absorption coefficients calculated from the empirical models(Miki model for glass wool and Jung model for urethane foam) and two quantities by present method are in good agreement with the measured values.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.127-128
• /
• 2021

Rigid urethane foam is widely applied because it is light and has superior insulation performance compared to insulation materials such as EPS or glass wool. However, it has the disadvantage of being vulnerable to fire. Therefore, in this study, before proceeding with the research to improve the fire resistance of the rigid polyurethane foam, we would like to investigate the change in density and thermal conductivity of the rigid polyurethane foam according to the change in the mixed weight of the main material and the curing agent. It was found that the density increased as the mixed weight increased. The thermal conductivity showed similar values overall. As for the density distribution, the central part was low and the outer part was high.