• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.187-196
• /
• 2014

In this paper, Minimize driving energy for operation within a defined distance yeokgan fixed time-resolved and determine the nature of the train is traveling, and to model mathematically. Urban rail car cruise in general by the PID controller is used instead of automatically tracking a target value while traveling in energy consumption to be minimized by using optimal control model railroad charyangreul was designed under real operating conditions the same. The actual track conditions apply to the minimum value or a separate listing of cars around the track facility without a driving energy of the automatic operation and to reduce the driving energy. Therefore, actual route chosen straight line 8 / gradient segment / curve for the measured data analysis, such as sections within the city-minute drive each section and presented how the trains to save energy, depending on the pattern of the train station in the region.

• Journal of the Korean Society for Railway
• /
• v.14 no.3
• /
• pp.248-255
• /
• 2011

Impact factor of concrete and ballast track which has been used in Korea railway was applied to equation (1+0.513V/100) from AREA. As the use of this equation, overcapacity of track design might be occurred. Therefore, this study compared impact of ballast track (well, bad) and concrete track (sleeper embeded system, rail floating and sleeper floating) by field test to analyzing dynamic effect of track structure's characterstic and wheel load on service line. In addition, it suggested a method to generate reasonable impact factor on each track type.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.371-379
• /
• 2010

Since Kyoto Protocol to the United Nations Framework Convention on Climate Change in 2005 takes effect, the transportation policies of most countries move toward encouraging the use of the transit mode with energy efficient and low carbon. Korea is 8th country of producing Co2 emissions and will be one of obligation countries decreasing Co2 after year 2013. In order to improve the efficiency of national transport system investment, this study developed the strategies toward rail-oriented transport system by considering operational speed and accessability, rail-oriented development, and introduce of ubiquitous technique in railway. The four major strategies targeted for future year are introduced here such as One-hour rail(connecting major cities within one hour), Seamless 30(accessing major railway stations within 30 minutes, Rail urbanism (railway-based urban planning), and U-rail (railway service with ubiquitous technique). Each strategy includes several action plans and their priorities are investigated using AHP(Analytic Hierarchy Process) to organize them by time scheme as short, mid, and long term perspective.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.759-770
• /
• 2014

Pyeongtaek is one of the most dynamic and fastest growing cities in Korea. It is expected that Pyeongtaek will be fostered as one of the most technologically advanced cities with over one million residents in ten years, in transit from the current status of an urban and rural multi-functional city. As a consequence of the change, it is also anticipated to embrace problems related to environmental pollution. The current study investigates perceptions and attitudes of Pyeongtaek citizens towards the natural environment and the conservation of nature. A survey of the environmental perception was conducted with 700 people from the city. The data was analyzed by SPSS 12.0. Findings of the survey demonstrate that Pyeontaek citizens, overall, are interested in environmental issues; they also expect the city to be prosperous without nature destruction. Based upon the results, the study describes the current status of the areas which the citizens consider as most crucial; further, it makes practical suggestions for ways of conserving the environment for the future.

• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.680-689
• /
• 2019

Temperature effects on the generation of brake wear particles from railway vehicles were generated, with a particular focus on the generation of ultrafine particles. A real scale brake dynamometer test was repeated five times under low and high initial temperatures of brake discs, respectively, to obtain generalized results. Size distributions and temporal patterns of wear particles were analyzed through visualization using clustered heatmaps. Our results indicate that high initial temperature conditions promote the generation of ultrafine particles. While particle concentration peaked within the range of fine sized particles under both low and high initial temperature, an additional peak occurred within the range of ultrafine sized particles only under high initial temperature. The timing of peak occurrence also differed between low and high initial temperature conditions. Under low initial temperature fine sized particles were generated intensively at the latter end of braking, whereas under high initial temperature both fine and ultrafine particles were generated more dispersedly along the braking period. The clustered correlation heatmap divided particle sizes into two groups, within which generation timing and concentration of particles were similar. The cut-off point between the two groups was approximately 100 nm, confirming that the governing mechanisms for the generation of fine particles and ultrafine particles are different.

• Journal of the Korean Society for Railway
• /
• v.14 no.6
• /
• pp.555-561
• /
• 2011

This paper is designed to propose methods to both analyze and control the reasons for cracks appearing during the construction of piers. For this aim, a numerical analysis was performed to identify the properties of crack which resulted from heat of hydration and differential drying shrinkage with the key influence factors considered. The results show that the thermal cracks occurred within a few days, and the drying shrinkage cracks within a few weeks. Meanwhile, settlement shrinkage cracks occurred within a few hours. Discussing the control methods based on the time of the cracks appearing, quality control, reduction of the unit quantity of cement, and the preservation of moisture on the surface are proposed as the realistic and effective methods for preventing settlement cracks, thermal cracks, and drying shrinkage cracks respectively.

• Journal of the Korean Society for Railway
• /
• v.16 no.2
• /
• pp.144-150
• /
• 2013

This paper presents an analysis of door design for the Ui LRT based on experiments to predict doorway flow-time and their analyses results. A similar railway vehicle (from Gimhae LRT) and operational conditions are utilized to assess the doorway flow-time through repetitive experiments. Design of the experiments consists of four scenarios, and the experiments are repeated 39 times in total. We use the results of the experiments to verify the design of doors of Ui LRT (e.g. the required number of doors and their width). Various statistical analyses are carried out for the flow-time with respect to the number of boarding/alighting passengers. We make three category levels of boarding/alighting passengers, and analyze the mean and variance for each category, and then carry out One-Way ANOVA to analyze how the number of boarding/alighting and onboard passengers impact flow-time. The results of this paper can be used for making decisions about doors of the LRT vehicle.

• Journal of the Korean Society for Railway
• /
• v.14 no.2
• /
• pp.188-193
• /
• 2011

In order to solve urban transportation problems, the various alternatives are presented to the public transportation system but the master plan of construction and operation is that there is no validity. PRT unlike other public transport system, is a new transport system that can respond appropriately, to solve the traffic demand, environmental and energy problems. Meanwhile, national and international PRT system was not commercially and the actual construction and operation of the PRT in case of base research is not well established. In this paper, PRT concept was established as the new transportation system, the target area(Nan-gok area) was selected to examine the feasibility of PRT systems and the corridor analysis method has been developed to predict the PRT demand as a basic material of planning process.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.383-386
• /
• 2006

The safety of the railway system is important because the system is a mass transit system and the results of the accident are inconceivable. The railway system is operated by train operation system such as train control system. So the train control system requires safety critical characteristics. In the European railway, ETCS (European Train Control System) project has been finished to accomplish the interoperability of each national railway signaling system. According to the interoperability degree, ETCS levels are suggested. As the highest level, ETCS level 3 suggests a radio communication. Also recently urban railway system is operated by driverless and automatic train control system. In this circumstance, more safety is required than before in the railway system. In order to accomplish the safety of a system, the requirements considering safety have to be suggested. The requirement is a set of several functions such as general function, environment, safety etc. For the safety critical system, safety function is more important than any other functions. The safety functions are deduced by safety analysis. In order to perform the safety analysis, the system hazards have to be identified and then risk analysis for each hazard should be performed. The risk is related to the frequency and the severity of each hazard. And then countermeasures for each risk have to be prepared. The summary of the countermeasures is about a kind of safety functions in a system. In this paper, the safety functions for a train control system are presented according to the above procedure.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.479-484
• /
• 2003

In the case of the feeder bus route choice, it is more desirable to choose the route by treating as a single route linked from origin to destination than the whole network. This study is to establish a concept that frames the feeder bus route choice technique for the change of the existing single bus route or the creation of the new feeder bus route. The concept of the feeder bus route choice technique in this study is not to frame the whole bus network but to frame a single route to a unit O-D pair. So, this study has the assumption that does not consider the waiting and transfer time at the bus stop. This system technique consists of the following phases: I) limitation of the road network examined for the study, ii) enumeration of the appropriate candidate routes by the permissive route length, and iii) determination of the optimum bus route by the route evaluation value.