• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.337-341
• /
• 2005

Most utiltity systems are subject to frequent changes, often due to increased loads and demand to up-grade quality of service provided. Urban renewal, expressway construction and suburban growth have also caused significant changes in urban utility distribution systems. Recently, it is required that a guideline for planning of a complete system, the reasonable design and construction methods for the efficient installation common utility tunnels must be estabilished. It prompts drastic measures to guard cities and their inhabitants against the horror of massive fires in the future. Preparedness holds the key to safety.

• International Journal of Safety
• /
• v.9 no.1
• /
• pp.47-53
• /
• 2010

The speed difference in mountainous area is known causing traffic conflicts and accidents. Thus, climbing lanes have popularly been installed in mountainous roads around the world. In the present paper, vehicle speeds within and around climbing lanes of Ho-nam and Jung-ang expressway were collected and evaluated. The evaluation was performed in terms of coefficient of variations which represent dispersion of vehicle speed in climbing lanes. Results show that speed dispersion is more significant at segments before and after climbing lanes than those within climbing lanes. The estimated accident risk was evaluated using The Solomon's u-shaped curve. It was identified that the accident risk is also a lot significant at the same segments as much as 2.2 times greater than those of climbing lanes.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.429-433
• /
• 2004

Most utiltity systems are subject to frequent changes, often due to increased loads and demand to up-grade quality of service provided. Urban renewal, expressway construction and suburban growth have also caused significant changes in urban utility distribution systems. Recently, it is required that a guideline for planning of a complete system, the reasonable design and construction methods for the efficient installation common utility tunnels must be estabilished. It prompts drastic measures to guard cities and their inhabitants against the horror of massive fires in the future. Preparedness holds the key to safety.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1535-1545
• /
• 2014

This study aims at improving the Reliability of DSRC Traffic information considering Traffic and Road Characteristics. First of all, this study analyzed the characteristics of DSRC data on urban expressway and problems of outlier data occurrence. After then, this study produced reliable traffic information by using an optimal method of the Outlier-Filtering. After Outlier-Filtering, this study performed accuracy evaluation and appropriateness check for the number of samples per confidence level. As a result, it showed that the MAPE was between 2.2% and 9.7% and RSME was between 2.2 and 7.5 which are very similar figures to the actual average traffic speed. Also, The samples of both Am peak and Pm peak periods were analyzed to be appropriate at the confidence level of 95%, and 90% within the allowable error range of 5kph.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1553-1558
• /
• 2014

The travel demand, peak hour ratio and forms of platform of urban railway stations are very different each other, also the users' behavior is. So the types of urban railway stations have to be classified according to these characteristics. However, the current methods of classification are arbitrary on the purpose of each studies and the legal standards are very simple; categorized by normal station vs. whistle station, types of trains, forms of platforms and shapes of architecture. This study clarifies the standards for classifying the types of urban railway stations, results the complete enumeration survey on all the urban railway stations in Seoul Metropolitan Area and makes the database based on the surveyed data, purposing on helping for making strategies and researching. On this study, utilizing the database which is established for this study, the correlation between the physical and geographical characteristics and users' travel patterns of urban railway stations is clarified by the statistical analysis. In the future, the statistical results will be helpful for making strategies and researching.

• International journal of steel structures
• /
• v.18 no.4
• /
• pp.1284-1296
• /
• 2018

Carbon fiber reinforced polymer (CFRP), plates bonding repair method is one of the simple repair methods for cracked steel structures. In this study, the influence of width of CFRP plates on bending fatigue life of out-of-plane gusset joint strengthened with CFRP plates was investigated from the experimental and numerical point of view. In the bending fatigue test of cracked out-of-plane gusset joint strengthened with CFRP plates, the effect of width of CFRP plates on crack growth life was clarified experimentally. Namely, it was revealed that the crack growth life becomes larger with increasing the width of CFRP plates. In the numerical approach, the stress intensity factor (SIF) at the surface point of a semi-elliptical surface crack was estimated based on the linear fracture mechanics. Furthermore, the extended fatigue life of cracked out-of-plane gusset joint strengthened with CFRP plates was evaluated by using the estimated SIF at the surface point and the empirical formula of the aspect ratio of semi-elliptical crack. As the results of numerical analysis, the estimated fatigue life of the specimen strengthened with CFRP plates showed the good agreement with the test results.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.114-123
• /
• 2023

With the development of computer vision technology, video sensors such as CCTV are detecting incident. However, most of the current incident have been detected based on existing fixed imaging equipment. Accordingly, there has been a limit to the detection of incident in shaded areas where the image range of fixed equipment is not reached. With the recent development of edge-computing technology, real-time analysis of mobile image information has become possible. The purpose of this study is to evaluate the possibility of detecting expressway emergencies by introducing computer vision technology to dash cam. To this end, annotation data was constructed based on 4,388 dash cam still frame data collected by the Korea Expressway Corporation and analyzed using the YOLO algorithm. As a result of the analysis, the prediction accuracy of all objects was over 70%, and the precision of traffic accidents was about 85%. In addition, in the case of mAP(mean Average Precision), it was 0.769, and when looking at AP(Average Precision) for each object, traffic accidents were the highest at 0.904, and debris were the lowest at 0.629.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.287-293
• /
• 2008

Density is used as the measure of effectiveness within the ramp junction influence area suggested in the KHCM 2005 in the LOS analysis of the ramp junction, and also density predictive models suggested in the KHCM 2005 is constructed based on the expressway with the speed limit of 100km/h or 110km/h in Korea. So, the density predictive models suggested in the KHCM 2005 are needed to verify if the models could be applied to the urban freeway with the speed limit of 80km/h or less, because the speed limits on most of the urban freeways in Korea are 80km/h or less. The purpose in this study is to construct and verify the appropriate density predictive model within the on-ramp merge influence area of the urban freeway by comparing with the USHCM 2000 and KHCM 2005 models.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.86-98
• /
• 2018

Since 2015, the Korea Expressway Corporation has provided predicted travel time information, which is reproduced from DSRC systems over the extended expressway network in Korea. When it is open for public information, it helps travelers decide optimal routes while minimizing traffic congestions and travel cost. Although, sutiable evaluations to investigate the reliability of travel time forecast information have not been conducted so far. First of all, this study seeks to find out a measure of effectiveness to evaluate the reliability of travel time forecast via various literatures. Secondly, using the performance measurement, this study evaluates concurrent travel time forecast information in highway quantitatively and examines the forecast error by exploratory data analysis. It appears that most of highway lines provided reliable forecast information. However, we found significant over/under-forecast on a few links within several long lines and it turns out that such minor errors reduce overall reliability in travel time forecast of the corresponding highway lines. This study would help to build a priority for quality control of the travel time forecast information system, and highlight the importance of performing periodic and sustainable management for travel time forecast information.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.467-476
• /
• 2010

Travel delay (TD) denotes a time difference between the running time of vehicle with a normal speed and the travel time of vehicle with a reduced speed for traversing the same segment of roadway, and is sometimes used as a measure of time delayed in the junction or bottleneck areas of roadway. Urban freeways in the foreign countries are often suffering from traffic delay within the entrance and exit ramp junction influence areas, as a freeway with the speed limit of 80 km/h or higher only during the rush hours, but those in our country are especially experiencing severe traffic delay on the mainline segments as well as within the entrance and exit ramp junction influence areas, as a freeway with the speed limit of 80 km/h or less regardless of the rush hours. So, the purpose in this study is to develop the models that could predict the travel delay within the ramp junction influence areas of urban freeway having the geographical features which differ from the expressway, and also examine the validity of the travel delay predictive models developed.