• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.55-63
• /
• 2018

In recent years, with the growing interest in electric vehicles, the development of a Neighborhood Electronic Vehicle (NEV) made for urban driving is accelerating. Existing NEVs are set to ~0.3 - 0.35 with more emphasis on performance rather than minimizing air resistance. In this paper, a NEV with a streamlined car body is proposed. The shape of dolphins and sharks was applied to the car body to minimize the air resistance generated when driving. Also, the performance of the vehicle was estimated by calculating the traction force and the roll couple, etc. To check the drag coefficient of the car body, finite element analysis software (COMSOL Multiphysics) was used. The frame of the vehicle is divided into the forward and the rear parts. Carbon pipe is used for the frame by MIG welding. The car body of the vehicle was fabricated by forming carbon fiber. This study confirmed the general possibility of using NEVs through driving experiments.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.91-97
• /
• 2019

Since the 2000s, mechanical parking lots have become an increasingly common solution to serious parking difficulties in urban areas. While safety regulations are in place, they can avert or minimize accidents only when drivers understand and comply with them, and so do not always prevent drivers from making mistakes. As a result, the number of serious accidents caused by driver errors continues to increase in proportion to the rapid increase in vehicles. Most of these accidents are caused by abnormal vehicle entry, despite the safeguards already in place. Therefore, in this thesis, we will study the vehicle entry prevention system and suggest how it can be made more effective in stopping or minimizing accidents.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.3
• /
• pp.279-285
• /
• 2012

Albeit the use of terrestrial 3D laser scanner (TLS) in the parts of landslide monitoring, cultural heritage documentation, civil engineering, urban engineering, etc. is increasing more and more, there is no international standardization regulation about the accuracy evaluation of the geometric element values, target, instrument calibration and test procedures, etc. Accordingly, this study deals with the manufacturing of TLS performance test target and the evaluation of TLS distance measurement and shows its suitability as the test target.

• Corrosion Science and Technology
• /
• v.16 no.6
• /
• pp.273-277
• /
• 2017

Atmospheric corrosion is clearly the most noticeable of all corrosion processes. A tremendous amount of economic losses are caused by atmospheric corrosion. Thus, it is imperative to know the level of atmosphere's aggressiveness or in other words "corrosivity", before designing or planning any corrosion prevention strategy. In Singapore, corrosivity values were not recorded earlier though the process of measurement and recording was prevalent in other countries. With an aim of filling this gap, three test sites were setup at three locations in Singapore to represent marine, industrial and urban atmospheres or their mixtures. Subsequently, corrosivity readings were measured and recorded according to ISO 9223:2012 for the first time in Singapore. Salient atmospheric constituents or parameters like time of wetness (TOW), $Cl^-$, $SO_2$, $NO_2$, $O_3$, and $HNO_3$ were measured at all sites over a period of time to categorize corrosivity of particular atmosphere. The effect of the atmosphere on corrosion of steel, Cu, Al, and Zn has also been investigated and quantified. "Estimated" and "determined" corrosivities were quantified and compared according to ISO 9223 standard. The study data along with final corrosivity measurements will be presented and discussed in the present work.

• International Journal of High-Rise Buildings
• /
• v.13 no.1
• /
• pp.97-102
• /
• 2024

In this paper, we would like to share our ongoing research on global population and demographic shifts and the corresponding need for diverse responses. As population growth varies worldwide, the pressing issue is the current global housing shortage. The USA alone lacks 4 million homes, underlining the urgency for new construction and renewal of existing. Our focus is primarily on new building processes, which must also incorporate elements of renewal for future sustainability. Our research addresses several key questions: How will roles for construction professionals change? What should be the primary goal of the design process? What types of technologies are currently available, and which aspects of the process can be enhanced with AI? A significant part of our study is exploring sustainable building methods that reduce embodied carbon and increase speed of construction. Our goal is to extend the transition from smart homes to cities, analyzing the evolution towards smart communities and cities. A critical aspect of our research is the 'kit of parts concept, involving prefabrication and modular construction. This approach is essential for both rebuilding and new projects, potentially lowering costs in manufacturing and design for long term. Lastly, we present a detailed comparison of the construction industry with manufacturing.

• International Area Studies Review
• /
• v.14 no.3
• /
• pp.454-476
• /
• 2010

In this paper is two-step trade model introduced. It is assumed that countries have 3 basic factors- capital(K), land (Z)and population(N)-as national factor endowments. As the first step, education 'produces' 'educated labor(EL)' which embodies new knowledge or new technology by using the population and capital as inputs. As the second step, manufacturing goods is produced with EL and uneducated labor(UL), and agriculture goods with land and UL. According to this model, the higher the increase rate of capital in a country is, the lower the usage rate of land is, the lower the increase rate of discount is, the country tends to export the manufacturing goods and import the agriculture goods. Trade widens the discrepancy of increase rate of EL in both countries but reduces the gap of increase rate of relative wage of EL as far as the gap of usage rate is not so big. Trade also affect real income rather than nominal income. This model can be extended to explain the migration from rural areas to urban areas when the manufacturing sector and education organization exist in urban area while the agricultural sector exist in rural area.

• KIEAE Journal
• /
• v.12 no.6
• /
• pp.77-84
• /
• 2012

The current architectural design of unit modular has been based on 2D of CAD program, so unit modular character which needs unit information management, as a dried-member system, has no effect on design process. The purpose of this study is We have developed a suitable BIM design process, according to various works of construction, then tried to contribute to supply and activation of the urban-life-housing based on unit modular. The BIM modeling process based on unit modular has been in order of unit combination with preparing manual classification, and, it has been constructed, at construction site, from housing foundation to roof finish by Bottom-up method. At a manufacturing factory, it has been produced in order of 1) grouping materials and parts, 2) fabricating unit boxes, and 3) interference examination of unit boxes, and each order has been classified as housing structure, architecture, plumbing process separately. At a construction site, the fabrication has been done in order of, like as a real housing construction scenario, 1) RC foundation work 2) unit module job-site-fabrication work, 3) roof truss work, 4) plumbing and HVAC work, and 5) housing interior finish work. After modeling process, the interference examination on each work of construction has finally completed modeling. The Unit modular utilizing BIM modeling can make easy housing maintenance through systematic control with preparing manual of unit module information, and securing accurate and speedy construction information. And it will promote design credibility and create maximum effect of unit modular construction method, such as construction period reduction and upgrade of construction quality, etc., through the computer simulation as real as construction environment in cyber space, and with the interfering examination.

• Journal of the Korean association of regional geographers
• /
• v.17 no.5
• /
• pp.536-553
• /
• 2011

New urbanization different from the manufacturing based urban growth has been widely discussed in post-modern city, consumption city and others to reflect the urban changes in qualitative manner. Urbanization stage models consider large cities to be in mature stage, reurbanization and the stages are assumed to be experienced successively in lower sized cities. However, since the industrial restructuring implies new urbanization experiences, this study examines new urbanization in diverse aspects such as the population change and the geographic and social characteristics of commuters and migrants for the 6 large cities in Korea. Seoul follows the urbanization stages in order while other 5 large cities are divergent in their transition from the industrial city. Regional large cities reveal broad reverse commuting and selective in-migration of economically active households for better work and housing opportunities available in central cities. Similar to the consumption city thesis with enhanced cultural and recreational amenities in western cities, the widening urban residential function including housing and other services is a new urbanization characteristic of large cities in Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.5
• /
• pp.637-645
• /
• 2019

Global warming and a new energy policy request the energy saving and pollutant emission control in municipal level. Previous studies focus on transportation in the Seoul metropolitan area which can easily meet the policy goal by reducing it. This study expands the area of urban energy planning to the industries and land use which takes up most of energy use of the city. We empirically study the Busan metropolitan area's 5 years natural gas and electricity consumption data by the industries and land use. Results show that energy usage significantly depends on not only population but also urbanizing intensity and industrial category. This paper address that the policy maker need to pay attention on energy usage pattern of each sectors during the planning.

• Journal of Korean Society on Water Environment
• /
• v.27 no.4
• /
• pp.391-396
• /
• 2011

Recently it revealed that urban runoff was one of the major source that contaminates the river, lake and estuary because it contains toxic compounds such as heavy metals and Poly Aromatic Hydrocarbons (PAHs) as well as suspended solids, organic compounds and nutrients. The engineered polymetric media in this research were developed for reducing pollutants in urban runoff and would be used to be charged in the storm water treatment equipment. The engineered media that were composed of the polypropylene was foamed to have the buoyancy and then shattered by mechanical for the efficient filtration. In this study, Spherical Expanded Polypropylene Media (SEPM), Crushed Polypropylene Media (CPM), Large Crushed Expanded Polypropylene Media (LCEPM), Small Crushed Expanded Polypropylene Media (SCEPM) were made from polypropylene. Surface characteristics of the developed media were determined by scanning electron microscopy analyses. Also, removal efficiencies of SS, $COD_{Cr}$ in the artificial road runoff and the bed headloss by media and particle pollutants captured by media were examined. Results on the surface characteristics of media indicated that SCEPM had the largest specific surface area, $0.80m^2/g$, the lowest specific gravity, 0.091, and the biggest porosity, 0.63, because of crushing the media at the process of manufacturing. And the SCEPM's removal efficiencies of TSS and $COD_{Cr}$ in the artificial road runoff were 92.9% and 83.6%, respectively and the headloss of SCEPM was the least of them.