• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1249-1253
• /
• 2005

This paper presents a method to model the path loss characteristics in microwave urban line-of-sight (LOS) propagation. We propose new upper- and lower-bound models for the LOS path loss using fuzzy linear regression (FLR). The spread of upper- and lower-bound of FLR depends on max and min value of a sample path loss data while the conventional upper- and lower-bound models, the spread of the bound intervals are fixed and do not depend on the sample path loss data. Comparison of our models to conventional upper- and lower-bound models indicate that improvements in accuracy over the conventional models are achieved.

• 대한수학회보
• /
• 제44권3호
• /
• pp.385-394
• /
• 2007

An upper bound of the basis number of the semi-strong product of cycles with bipartite graphs is given. Also, an example is presented where the bound is achieved.

• 한국기계가공학회지
• /
• 제19권5호
• /
• pp.98-104
• /
• 2020

Pipe expansion involves various methods to enlarge the diameter of the pipes with the use of a mandrel or punch placed inside the pipe. In this study, the upper bound method was used to analyze the pipe expanding process as well as design a die. A kinematically admissible velocity field was derived for the upper bound analysis with the occurrence of pipe thinning during the expansion factored in. The analysis confirms that a semi-cone angle of the punch between 15ween pip is most advantageous for pipe expansion. The results of the upper bound analysis, which were also consistent with those of the FEM, can be useful for the design of a pipe expansion die.

• 한국지반공학회논문집
• /
• 제20권7호
• /
• pp.207-215
• /
• 2004

본 연구는 보강사면에 상계이론를 적용하여 실제 한계상태에 가까운 신뢰성이 높은 해석방법을 개발하는데 목적이 있으며 상계해석의 유한요소공식화를 전개하는데 있어 거시적인 관점으로부터 비등방성이면서 균질한 재료에 대한 수치해석의 기본 개념은 얻을 수 있다. 보강토는 뒷채움한 성토와 보강재 경계면의 상호작용으로 보강토의 강도가 보강재의 재료적 특성에 의존하고 있기 때문에 흙의 역학적 특성과 보강토의 전체 거동은 보강재의 기하학적인 배열과 상대적인 면적에 의해서 조절할 수 있다. 따라서, 상계이론은 보강사면의 한계상태 거동을 효과적으로 산정할 수 있어 국부적으로 발생하는 소성파괴를 예측할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.236-239
• /
• 1995

In this paper,Upper bound analysis to predict the formation of corner cavity during the final stage of backward extrusion is used. The critical condition for corner cavity formation is obtained by upper bound analysis. The quantitive relationships between corner cavity formation and process parameters are studied. To broaden forming limit area, driven container and multi-step forming process is proposed. As a result of FEM, forming limit is enlarged. And this results is compared with the analytric results

• 충청수학회지
• /
• 제22권1호
• /
• pp.7-10
• /
• 2009

With the introduction of a new parameter $n{\geq}1$, Kim generalized an upper bound for the exponential function that implies the inequality between the arithmetic and geometric means. By a change of variable, this generalization is equivalent to exp $(\frac{n(x-1)}{n+x-1})\;\leq\;\frac{n-1+x^n}{n}$ for real ${n}\;{\geq}\;1$ and x > 0. In this paper, we show that this inequality is true for real x > 1 - n provided that n is an even integer.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 춘계학술대회논문집
• /
• pp.40-47
• /
• 1996

An upper bound solution of tube drawing process using a fixed tapered plug has been obtained , which reduces to an solution for tube sinking by setting friction factor between tube and plug at zero. Effects of various process paraments have been discussed based on the solution.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.598-603
• /
• 2001

For metal forming analysis, upper-bound solution is practical method because the solution is overestimated. It is limited to determine stresses on tools by using upper-bound solution. In this study, new scheme to calculate stresses on tools based on upper bound solution is proposed. To verify the proposed scheme, plane strain drawing has been considered. The stresses on tools obtained by the proposed scheme are compared with results of rigid plastic FEM. And the stresses on tools have been determined by the proposed scheme in the forging within plane strain deformation.

• 소성∙가공
• /
• 제12권1호
• /
• pp.11-17
• /
• 2003

For metal forming analysis, upper-bound solution is a practical method because the solution is overestimated. However it is not easy to determine the stresses on dies by using upper-bound solution. In this study, new scheme to calculate the stresses on dies based on upper bound solution is proposed. In the velocity fields, imaginary velocity is adapted to analyze the normal pressure on die surfaces. To verify the proposed scheme. plane strain drawing has been considered. The stresses on dies obtained by the proposed scheme are compared with the results of rigid plastic FEM and the experimental results. In the experiments, pressure film is used to measure the normal pressure on dies.

• 동력기계공학회지
• /
• 제4권3호
• /
• pp.72-80
• /
• 2000

In order to design a stable robust controller, nominal model, and the upper bound about the uncertainty which is the error of the model are needed. The problem to estimate the nominal model of controlled system and the upper bound of uncertainty at the same time is called robust identification. When the nominal model of controlled system and the upper bound of uncertainty in relation to robust identification are given, the evaluation of the validity of the model and the upper bound makes it possible to distinguish whether there is a model which explains observation data including disturbance among the model set. This paper suggests a method to identity the uncertainty which removes disturbance and expounds observation data by giving a probable postulation and plural data set to disturbance. It also examines the suggested method through a numerical computation simulation and validates its effectiveness.