• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.405-422
• /
• 2010

Occupational musculoskeletal disorders currently account for the largest proportion of the occupational illnesses in Korea. In this research, status of musculoskeletal disorders among the occupational illnesses was examined through workers' compensation claims data. Types and characteristics of musculoskeletal disorders were looked at other data set as well. The data sets included epidemiological investigation data reported by Occupational Safety and Health Research Institute, and data collected from occupational disease surveillance reports and Korean occupational health-related scientific journals. Number of cases, incidence rate and insurance benefits for occupational musculoskeletal disorders in Korea are increasing every year. In addition, musculoskeletal disorders occurrence is shifted from large enterprises group to small-and-medium group, from manufacturing to service sector, and from production workers to office and professional workers. Although low back pain is still most common, its occurrence characteristics is gradually shifted from traumatic to cumulative while musculoskeletal disorders are somewhat seemingly moved from lumbar to upper limb body part. Musculoskeletal disorders were observed to be more diverse and prevalent in epidemiological investigations or surveillance data rather in workers' compensation claims data. Musculoskeletal disorders occurrence is related to demographic factors, occupational psychosocial factors, and ergonomic risk factors at workplace for which appropriate preventive measures needed to be made accordingly.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1276-1277
• /
• 2006

The ever increasing requirements on today's compacts with regard to their geometry and precision call for flexible high-precision and most capable production systems. DORST Technologies has coped with these requirements by developing the new HP series for pressing forces between 1600 kN and 16000 kN and the new HS series for pressing forces between 150 kN and 1200 kN. These fully hydraulic presses featuring upper ram, lower ram, core rod, filler, up to 4 lower tool levels and up to 4 upper tool levels with closed-loop controlled movements. Thanks to latest servo technology and an electronic bus system it is possible to have all movements closed-loop controlled in the desired relation to each other. Thus, today's hydraulic presses provide high stroke rates, low energy consumption and a user-friendly interface. The input of data is carried out via clearly arranged screen masks on a touch-screen. The innovative DORST $IPG^{(R)}$ (Intelligent Program Generator) has been designed to support the set-up staff in preparing and optimizing the toolprogram. The combination of the machine type with the hydraulic unit determines the productivity in consideration of the specific application and the part to be pressed. Thanks to the closed-loop control circuits, DORST hydraulic automatic presses of the latest generation ensure unmatched precision and repeatability - and consequently process reliability - often without necessitating subsequent machining steps.

• Journal of Korean Association for Spatial Structures
• /
• v.16 no.2
• /
• pp.89-96
• /
• 2016

Cable structures are lightweight structures of flexible type, cable members have only axial stiffness related to tension, they can carry neither bending nor compression. This study is the analysis of cable truss systems are composed of upper and low cables by connecting bracing cables, the structural principle is based on a tensegrity system by using bracing tension members, discontinuous compression members and continuous tension members. A hanging roof of cable truss system is too flexible against vertical loads, most cable members are stabilized by connecting the prestressed upper and lower cable by bracing cables. A cable truss roof system is formed by adding a set of cables with reverse curvature to the suspension cables. With the sets of cables having opposite curvature to each other, cable truss is able to carry vertical load in both upward and downward direction with equal effectiveness, and then a cable truss acts as load bearing elements by the assemble of ridge cables, valley cables and bracing cables. This paper will be shown the geometric non-linear analysis result of cable truss systems with various sag ratio for deflections and tensile forces, the analytical results are compared with the results of other researchers.

• The Journal of Korean Physical Therapy
• /
• v.28 no.2
• /
• pp.88-94
• /
• 2016

Purpose: The purpose of this study was to compare therapeutic climbing exercise and general isometric exercise in patients with shoulder impingement syndrome. Methods: Among 20 adults, study subjects were arbitrarily classified into an experimental group of 10 and a control group of 10. The control group performed general isometric exercise (ISE) and the experimental group performed therapeutic climbing exercise (TC) (3 sets, 3 times per week for 8 weeks). To evaluate the effects of exercise, subjects were evaluated using a Disabilities of the arm, shoulder and hand score (DASH), a goniometer for range of motion, and shoulder activity measured serratus anterior, upper trapezius, and lower trapezius. Independent and paired t-test were used for comparison of the effect between groups. Results: DASH scores showed a significant decrease in both groups after 8 weeks of treatment (p<0.001) and significant difference was observed between the TC groups (p<0.01). Flexion and abduction were significantly increased after 8 weeks of treatment in the ISE group (p<0.001) and flexion, abduction, external and internal rotation were significantly increased after 8 weeks of treatment in the TC group (p<0.001). Serratus anterior and lower trapezius activity were significantly increased after 8 weeks of treatment (p<0.001) and upper trapezius activity was not significantly increased after 8 weeks of treatment in the ISE group (p>0.05). Serratus anterior, lower trapezius, and upper trapezius activity were significantly increased after 8 weeks of treatment in the TC group (p<0.001). Conclusion: Scapular stabilizing exercise using a therapeutic climbing exercise increases range of motion and decreases DASH, and increases activity of shoulder muscles in patients with impingement syndrome.

• Journal of the Korea Convergence Society
• /
• v.7 no.5
• /
• pp.213-219
• /
• 2016

This paper presents a branch-and-bound algorithm for solving the concave minimization problem with upper bounded variables whose single constraint is linear. The algorithm uses simplex as partition element. Because the convex envelope which most tightly underestimates the concave function on the simplex is uniquely determined by solving the related linear equations. Every branching process generates two subsimplices one lower dimensional than the candidate simplex by adding 0 and upper bound constraints. Subsequently the feasible points are partitioned into two sets. During the bounding process, the linear programming problems defined over subsimplices are minimized to calculate the lower bound and to update the incumbent. Consequently the simplices which do certainly not contain the global minimum are excluded from consideration. The major advantage of the algorithm is that the subproblems are defined on the one less dimensinal space. It means that the amount of work required for the subproblem decreases whenever the branching occurs. Our approach can be applied to solving the concave minimization problems under knapsack type constraints.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1619-1626
• /
• 2024

In order to optimize the operational safety and reliability of the upper launcher for the CFETR ECRH system, a design of the launcher for NTM control based on the remote steering concept is currently being carried out for comparison with the front steering equivalent. This paper presents the layout design and analysis of the quasi-optical system in the remote steering launcher. A 3D visual quasi-optical design tool has been developed for the quasi-optical system, which can parameterize modeling, perform general astigmatic beam calculation and show the accurate beam propagation path in the upper port. Three identical sets of quasi-optical modules are arranged in the launcher, and each one consists of two fixed double-curvature focusing mirrors, which focus and reflect the steering beams (- 12°-12°) from two square corrugated waveguides. The beam characteristics at the resonance layer are described, and the average beam radius is < 100 mm. The peak head loads on the surfaces of the two fixed mirrors are 1.63 MW/m² and 1.52 MW/m². The position and size of the beam channel in the blanket are obtained, and the opening apertures on the launcher-facing and plasma-facing sides of the blanket module are 0.54 m² and 0.4 m², respectively.

• Structural Engineering and Mechanics
• /
• v.42 no.2
• /
• pp.247-267
• /
• 2012

Calculating the displacements of retaining walls under seismic loads is a crucial part in optimum design of these structures and unfortunately the techniques based on active seismic pressure are not sufficient alone for an appropriate design of the wall. Using limit analysis concepts, the seismic displacements of retaining walls are studied in present research. In this regard, applying limit analysis method and upper bound theorem, a new procedure is proposed for calculating the yield acceleration, critical angle of failure wedge, and permanent displacements of retaining walls in seismic conditions for two failure mechanisms, namely sliding and sliding-rotational modes. Also, the effect of internal friction angle of soil, the friction angle between wall and soil, maximum acceleration of the earthquake and height of the wall all in the magnitude of seismic displacements has been investigated by the suggested method. Two sets of ground acceleration records related to near-field and far-field domains are employed in analyses and eventually the results obtained from the suggested method are compared with those from other techniques.

• Korean Journal of Mathematics
• /
• v.19 no.2
• /
• pp.163-169
• /
• 2011

Let D be an integral domain, S be a multiplicative subset of D such that DS is a PID, and D[X] be the polynomial ring over D. We show that S is an almost splitting set in D if and only if every nonzero prime ideal of D disjoint from S contains a primary element. We use this result to give a simple proof of the known result that D is a UMT-domain and Cl(D[X]) is torsion if and only if each upper to zero in D[X] contains a primary element.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.57-60
• /
• 2000

In this paper, we describe the implementation of Bluetooth headset. Bluetooth headset sets up link using ACL connection between headset and audio gateway, transfers 64kbps voice using SCO connection. Bluetooth headset implemented in this paper is designed with no HCI, so all protocol stack is implemented in Bluetooth module. We verify the upper layer protocol and application program using C-language modeling on Unix environment.

• Korean Journal of Mathematics
• /
• v.27 no.4
• /
• pp.1077-1108
• /
• 2019

The notions of intuitionistic fuzzy UP-subalgebras and intuitionistic fuzzy UP-ideals of UP-algebras were introduced by Kesorn et al. [13]. In this paper, we introduce the notions of intuitionistic fuzzy near UP-filters, intuitionistic fuzzy UP-filters, and intuitionistic fuzzy strong UP-ideals of UP-algebras, prove their generalizations, and investigate their basic properties. Furthermore, we discuss the relations between intuitionistic fuzzy near UP-filters (resp., intuitionistic fuzzy UP-filters, intuitionistic fuzzy strong UP-ideals) and their upper t-(strong) level subsets and lower t-(strong) level subsets in UP-algebras.