• Journal of Welding and Joining
• /
• 제17권2호
• /
• pp.66-75
• /
• 1999

Weld bead quality in tailored blank(TB) is critically affected by edge preparation of sheets. The edge quality of prepared sheets for TB can be classified into straightness and the cross section quality of sheared plane such as a ratio of shear face, shear plane angle, etc. In order to have a good edg quality for butt-welding sheets, precision shearing will be recommended. In this paper, the feasibility of a conventional mechanical shearing as the edge preparation for tailored blanks is studyied. It reveals that fine shearing may not be the unique solution as it is generally accepted. To obtain the good shearing condition with a conventional mechanical shearing, experiments were carried out using Tahuchi method. The major parameters affecting a sheared contour are the clearance between upper blade and lower blade, and shear angle. The optimal shearing condition yields a very good straightness along the entire length of the cut, which gives a butt joint gap less than 10% of the base material thickness. The good cross section of sheared plane is also achieved in the optimal shearing condition such as a ratio of the shear face above 65%, a cross section's shear plane angle above 85%, little burr, which is providing finally good weld beads.

• 한국측량학회지
• /
• 제27권6호
• /
• pp.723-731
• /
• 2009

최근 지구 온난화 등의 영향으로 집중호우의 빈도가 급증하고 있으며, 강우강도 역시 강해지고 있는 실정이다. 이에 따라 국지적인 홍수피해가 증가하고 있으며, 댐 상류지역에서는 지형적 특성과 댐에 의한 배수위의 영향으로 많은 피해가 발생하고 있다. 그러나 대부분의 홍수피해의 경감대책은 인구밀집지역인 하류지역에 집중되고 있어 상류지역의 침수는 상대적으로 소홀히 다뤄지고 있다. 이에 본 연구에서는 정밀 3차원 지형모델을 구축하여 상류지역의 지형적 특성을 반영하고 강우발생시 유출특성을 조사하여 홍수시뮬레이션을 수행함으로써 상류지역의 침수피해양상과 침수취약지역을 분석하고자 하였다. 연구 결과, 홍수시뮬레이션에 의해 상류지역의 침수발생을 재현할 수 있었으며, 발생 가능한 강우에 대한 가상 홍수 시나리오에 의해 시뮬레이션을 수행함으로써 침수 취약지역과 그 피해면적을 효과적으로 도출할 수 있었다. 또한 침수 취약 지역에 대한 침수 예측도를 제작함으로써 강우 규모별 피해지역의 신속한 판단과 침수방어 대책의 수립에 효과적으로 활용할 수 있을 것으로 사료된다.

• 대한기계학회논문집
• /
• 제12권3호
• /
• pp.551-560
• /
• 1988

본 연구에서는 해석하려는 시스템의 유동 및 열전달 현상의 개념도를 Fig.1 에 나타내었다. 고체 입자는 윗부분 홈으로부터 분사되어, 선택적 투과면을 통해서 입사되는 복사열을 흡수 하며, 기체는 아래 또는 위의 홈 부분으로부터 들어와서 고체 입자와의 대류열전달로 가열이 된다. 기차게 아래 홈에서부터 분사되는 경우 대류에 의해 가열된 기체가 역성층화로 인해 부력을 받게 되어, 고체 입자의 하강 속도가 감 소할 때 입자의 체류 시간의 증가에 따른 복사열의 흡수효과에 대하여 고찰하였으며 입자의 크기, 투사 복사량, 분사속도, 입자의 질량유량 등을 파라미터로 하여 이들의 변화에 따른 영향을 규명하였다. 2-방연계를 고려한 2-방정식 모델을 구성하고 고체 입자에 대하여는 Lagrangian 방법으로 기술하였으며 수치해석에 있어 유한차분법을 도 입하고 두 상간의 상호연계는 PSI-Cell 방법을 이용하였고 복사 열유속은 2-유속 모델 (two-flux model)을 도입하여 계산하였다.

• 대한디지털의료영상학회논문지
• /
• 제17권1호
• /
• pp.13-18
• /
• 2015

Purpose : Skip the repetitive HRCT axial scan in order to reduce the exposure of patients during chest HRCT scan, Helical Scan Data into a reconstructed image, and exposure of the patient change and visually evaluate the usefulness of the HRCT images. Materials and method : Patients were enrolled in the survey are 50 people who underwent chest CT scans of patients who presented to the hospital from January 2015 to March 2015. 50 people surveyed 22 people men and 28 people women people showed an average distribution of 30 to 80 years age was 48 years. 50 patients to Somatom Sensation 64 ch (Siemens) model with 120 kVp tube voltage to a reference mAs tube current to mAs (Care dose, Siemens) as a whole, including the lungs and the chest CT scan was performed. Scan upon each patient CARE dose 4D (Automatic exposure control, Siemens Medical Solution Erlangen, Germany) was to maintain the proper radiation dose scan every cross-section through a device that automatically adjusts the tube current of. CT scan is the rotation time of the Tube slice collimation, slice width 0.6 mm, pitch factor was made under the terms of 1.4. CT scan obtained after the raw data (raw data) to the upper surface of the axial images and coronal images for each slice thickness 1 mm, 5 mm intervals in the high spatial frequency calculation method (hight spatial resolution algorithm, B60 sharp) was the use of the lung window center -500 HU, windows were reconstructed into images in the interval -1000 HU to see. Result : 1. Measure the total value of DLP 50 patients who proceed to chest CT group A (Helical Scan after scan performed with HRCT) and group B (Helical Scan after the HR image reconstruction to the original data) compared with the group divided, analysis As a result of the age, but show little difference for each age group it had a decreased average dose of about 9%. 2. A Radiation read the results of the two Radiologist and a doctor upper lobe and middle lobe of the lung takes effect the visual evaluation is not a big difference between the two images both, depending on the age of the patient, especially if the blood vessels of the lower lobe (A: 3.4, B: 4.6) and bronchi(A: 3.8, B4.7) image shake caused by breathing in anxiety (blurring lead) to the original data (raw data) showed that the reconstructed image is been more useful in diagnostic terms. Conclusion : Scan was confirmed a continuous, rapid motion video to get Helical scan is much lower lobe lung reduction in visual blurring, Helical scan data to not repeat the examination by obtaining HRCT images reorganization reduced the exposure of the patient.

• 한국강구조학회 논문집
• /
• 제18권6호
• /
• pp.783-792
• /
• 2006

본 연구는 압연형강이나 조립형강과 같은 강구조물의 지간증가나 하중 증가로 큰 휨강성이 필요한 경우 상부플랜지나 하부플랜지에 부착하여 구조물의 하중저항성능을 향상시켜주는 커버플레이트의 온도변형을 이용한 프리스트레싱 도입 방법의 개발에 관한 것으로 다단계 온도변형이 도입된 커버플레이트를 프리스트레싱 도입을 위한 구조물에 강결한 후 커버플레이트의 수축으로 발생하는 다단계 수축력을 프리스트레싱력으로 이용하는 방법이다. 본 연구에서는 온도변형에 의하여 구조물에 도입되는 프리스트레싱력의 이론적 연구와 다단계 온도변형을 이용한 다단계 프리스트레싱 기법의 도입을 위하여 커버플레이트의 다단계 온도분포에 대한 열전달 이론해의 제시와 H형강을 대상으로 다단계 온도변형에 의한 다단계 프리스트레스 도입 효과를 분석하였다.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제13권2호
• /
• pp.151-170
• /
• 2009

This study reports a research which was conducted on how frequently and where the students use the unit circle method while dealing with trigonometric functions in solving the trigonometry questions. Moreover, the reasons behind the choice of the methods, which could be the unit circle method, the ratio method, or the use of trigonometric identities, are also investigated to get an insight about their understanding. In this study, the relationship between the students' choices of methods in solving questions is examined in terms of instrumental or relational understanding. This is a multi-method research which involves a range of research strategies. The research techniques used in this study are test, verbal protocol (think aloud), and interview. The test has been applied to ten tenth grade students of a public school to get students' solution processes on the paper. Later on, verbal protocol has been performed with three students of these ten who were of the upper, middle and lower sets in terms of their performance in the test. The aim was to get much deeper data on the students' thinking and reasoning. Finally, interview questions have been asked both these three students and other three from the initial ten students to question the reasons behind their answers to the trigonometry questions. Findings in general suggest that students voluntarily choose to learn instrumentally whose reasons include teachers' and students' preference for the easier option and the anxiety resulting from the external exam pressure.

• 한국전자파학회논문지
• /
• 제11권2호
• /
• pp.313-321
• /
• 2000

본 논문은 등방성 상반 매질과 단축 이방성 하반 매질의 경계변에 위치하는 수평 미세 전류원이 시간 영역에 서 충격적으로 가해칠 때, 경계변에 발생하는 수평 전기장을 구하는 반공간 경계면 문제를 다룬다. 경계변 전기 장에 대해 Cagniard -de- Hoop 법을 변형 적용함으로써. 이 전기장에 대한 명시적 해를 얻는다 또한' 경계변상 에서 퍼져 나가는 Dirac $\delta$- 함수 형태의 충격 성분에 대한 방사 특성에 대해서 논의하는데, 이 충격 성분은 원 방 경계장 특성을 이해하는데 있어서 중요하다. 한편, 단축 이방성은 등방성보다 일반화된 개념이므로 이 논문 에서 구한 전기장 해에서 이방성을 제거하면 등방성 매칠에 대한 해로 환원된다

• 대한약침학회지
• /
• 제12권4호
• /
• pp.33-50
• /
• 2009

Objectives : This study was conducted to confirm validation and stability of concentration analysis method of pure melittin (Sweet Bee Venom-Sweet BV) extracted from the bee venom by utilizing protein isolation method of gel filtration. Methods : All experiments were conducted at Biotoxtech, a non-clinical studies authorized institution, under the regulations of Good Laboratory Practice (GLP). Standard solutions of melittin (SIGMA, USA) and test substances were dispensed and were analyzed with HPLC for Sweet BV to secure the validation of analysis. Results : 1. Measurement of system suitability of Sweet BV satisfied criterion of below 3%. 2. Confirming Linearity of Sweet BV in 10-200${\mu}g/m\ell$ solution yielded correlation coefficient (r) of 0.995 and accuracy of 85-115% which satisfy criterion. 3. Measurement of Specificity of Sweet BV didn't yield any substance affecting the peak of test substances, but detected at 21.22min verified as the test substance. 4. Confirming Intra-day of Sweet BV, accuracy and precision of 0.1, 100${\mu}g/m\ell$ were 105.70, 95.81 and 0.66, 0.73, respectively, satisfying both criteria of accuracy (85-115%) and precision (within 10%). 5. To measure Stability in autosampler, all samples used in Intra-day reproducibility sat in the autosampler for five hours and were re-analyzed. Both variability and precision satisfied the criteria. 6. Homogeneity of Sweet BV (0.1, 100${\mu}g/m\ell$) at upper, middle, and lower layers all satisfied the accuracy and precision criteria. 7. Stability of Sweet BV (0.1, 100${\mu}g/m\ell$) at room temperature for four hours and refrigerated for 7 days all satisfied the criterion. 8. For the measurement of Quality control, QC samples measured on the first and eighth day all satisfied accuracy and precision criteria. Conclusion : Above experiment data satisfies validation and stability of concentration analysis method of Sweet BV.

• 제어로봇시스템학회논문지
• /
• 제16권3호
• /
• pp.305-312
• /
• 2010

The aim of this study is to find an analytic solution to the problem of determining the optimal capacity of a batch-storage network to meet demand for finished products in a system undergoing joint random variations of operating time and batch material loss. The superstructure of the plant considered here consists of a network of serially and/or parallel interlinked batch processes and storage units. The production processes transform a set of feedstock materials into another set of products with constant conversion factors. The final product demand flow is susceptible to joint random variations in the cycle time and batch size. The production processes have also joint random variations in cycle time and product quantity. The spoiled materials are treated through regeneration or waste disposal processes. The objective function of the optimization is minimizing the total cost, which is composed of setup and inventory holding costs as well as the capital costs of constructing processes and storage units. A novel production and inventory analysis the PSW (Periodic Square Wave) model, provides a judicious graphical method to find the upper and lower bounds of random flows. The advantage of this model is that it provides a set of simple analytic solutions while also maintaining a realistic description of the random material flows between processes and storage units; as a consequence of these analytic solutions, the computation burden is significantly reduced. The proposed method has the potential to rapidly provide very useful data on which to base investment decisions during the early plant design stage. It should be of particular use when these decisions must be made in a highly uncertain business environment.

• 대한기계학회논문집B
• /
• 제34권8호
• /
• pp.739-747
• /
• 2010

고온의 내부 원형 실린더가 존재하는 저온의 사각 밀폐계 사이의 온도차이에 의해 발생하는 자연대류에 관해 수치해석을 수행하였다. 본 연구는 내부의 원형 실린더를 표현하기 위해 유한 체적법에 기초한 가상 경계법을 사용하여 Ra = $10^7$ 에서 2 차원 비정상상태의 자연대류 현상에 대한 해를 얻었다. 더욱이 밀폐계의 수직 중심선에 따른 내부 원형 실린더의 위치 변화에 의한 열전달과 유동에 관한 영향을 연구하였다. 내부원형 실린더의 위치 변화에 따라 자연대류 현상은 비정상상태에서 정상상태로 변화 되었다. 연구 결과 두가지의 임계 위치를 얻을 수 있었다. 하부 경계는 0.05 인 지점이고 상부경계는 0.18 인 지점이다. 하부 경계와 상부 경계의 사이의 위치에서는 열 및 유동장이 정상상태임을 알 수 있었다.