• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.38.3-38.3
• /
• 2021

We are developing an optomechanical design of infrared telescope for the CubeSat and Unmanned Aerial Vehicle (UAV) which adapts the Linear Astigmatism Free- Three Mirror System in the confocal off-axis condition. The small entrance pupil (diameter of 40 mm) and the fast telescope (f-number of 1.9) can survey large areas. The telescope structure consists of three mirror modules and a sensor module, which are assembled on the base frame. The mirror structure has duplex layers to minimize a surface deformation and physical size of a mirror mount. All the optomechanical parts and three freeform mirrors are made from the same material, i.e., aluminum 6061-T6. The Coefficient of Thermal Expansion matching single material structure makes the imaging performance to be independent of the thermal expansion. We investigated structural characteristics against external loads through Finite Element Analysis. We confirmed the mirror surface distortion by the gravity and screw tightening, and the overall contraction/expansion following the external temperature environment change (from -30℃ to +30℃).

• Korean Journal of Remote Sensing
• /
• v.34 no.2_2
• /
• pp.419-429
• /
• 2018

An unmanned autonomous maritime surface system can move the vehicle to the areas for observing the ocean accidents, disasters, and severe weather conditions. Detection and monitoring technologies have been developed by the converging of the regional and local surveillance system. Wave Glider, one of the autonomous maritime surface systems, is ocean-wave propelled autonomous surface vehicle and controlled using Iridium satellite communication. In this study, we carried out two-time Wave Glider observations for 2016 and 2017 summer in the East China Sea that the area was influenced by low-salinity water. We observed the sea surface warming effect due to the low-salinity water using the regional (satellite) and local (Wave Glider) surveillance system. We also monitored the effect of the typhoon and understood the change of the ocean-atmosphere environments in real-time. New unmanned surface system with autonomous system and high endurance structure can measure comprehensively and usefully a long observation in complicated ocean environments because of connecting with other surveillance systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.597-606
• /
• 2020

Because the USV(Unmanned Surface Vehicle) is capable of remote control or autonomous navigation at sea, it can secure the superiority of combat power while minimizing human losses in a future combat environment. To plan the technology for the development of USV, the trend analysis of related technology and the selection of promising technology should be preceded, but there has been little research in this area. The purpose of this paper was to measure and evaluate the technology trends quantitatively. For this purpose, this study analyzed the technology trends and selected promising/declining technologies using topic modeling of papers and patent data. As a result of topic modeling, promising technologies include control and navigation, verification/validation, autonomous level, mission module, and application technology, and declining technologies include underwater communication and image processing technology. This study also identified new technology areas that were not included in the existing technology classification, e.g., technology related to research and development of USV, artificial intelligence, launch/recovery, and operation, such as cooperation with manned and unmanned systems. The technology trends and new technology areas identified through this study may be used to derive key technologies related to the development of the USV and establish appropriate R&D policies.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.4
• /
• pp.73-79
• /
• 2010

Flight test is the final and a mandatory process for the development of unmanned aerial vehicles(UAVs) as well as manned. Since most UAVs fly in a low speed and are prone to adverse weather conditions such as air turbulence, atmospheric weather environment around flight test regions will be a critical item to be considered for a flight test planning for UAVs. In this paper, we suggest a decision method for a UAV flight test schedule based on weather conditions of surface and upper atmospheres and also introduce a program for an effective flight test planning through weather forecasts.

• The Journal of Korea Robotics Society
• /
• v.11 no.4
• /
• pp.217-225
• /
• 2016

Dynamic Positioning (DP) is used to automatically maintain the position and heading of a floating structure subjected to environmental disturbances. A DP control system is composed of a motion controller to compute the desired force and moment and a thrust allocator to distribute the computed force and moment to multiple thrusters considering mechanical and operational constraints. Among various thruster configurations, azimuth thrusters or propeller/rudder pairs tend to make the allocation problem difficult to solve, because these types of propulsion systems include nonlinear constraints. In this paper, a dynamic positioning strategy for a twin-thruster ship that is propelled by two azimuthing thrusters is addressed, and a thrust allocation method which does not require a numerical optimization solver is proposed. The applicability of the proposed method is demonstrated with an experiment using an autonomous boat.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.211-220
• /
• 2021

Land Surface Temperature (LST) is one of the useful parameters to diagnose the growth and development of crop and to detect crop stress. Unmanned Aerial Vehicle (UAV)-based LST (LSTUAV) can be estimated in the regional spatial scale due to miniaturization of thermal infrared camera and development of UAV. Given that meteorological variable, type of instrument, and surface condition can affect the LSTUAV, the evaluation for accuracy of LSTUAV is required. The purpose of this study is to evaluate the accuracy of LSTUAV using LST measured at ground (LSTGround) under various meteorological conditions and growth phases of garlic crop. To evaluate the accuracy of LSTUAV, Relative humidity (RH), absolute humidity (AH), gust, and vegetation index were considered. Root mean square error (RMSE) after minimizing the bias between LSTUAV and LSTGround was 2.565℃ under above 60% of RH, and it was higher than that of 1.82℃ under the below 60% of RH. Therefore, LSTUAV measurement should be conducted under the below 60% of RH. The error depending on the gust and surface conditions was not statistically significant (p-value < 0.05). LSTUAV had reliable accuracy under the wind speed conditions that allow flight and reflected the crop condition. These results help to comprehend the accuracy of LSTUAV and to utilize it in the agriculture field.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.1
• /
• pp.87-99
• /
• 2015

In recent years, the development of autonomous surface vehicles has been a field of increasing research interest. There are two major areas in this field: control theory and path planning. This study focuses on path planning, and two objectives are discussed: path planning for Unmanned Surface Vehicles (USVs) and implementation of path planning in a real map. In this paper, satellite thermal images are converted into binary images which are used as the maps for the Finite Angle $A^*$ algorithm ($FAA^*$), an advanced $A^*$ algorithm that is used to determine safer and suboptimal paths for USVs. To plan a collision-free path, the algorithm proposed in this article considers the dimensions of surface vehicles. Furthermore, the turning ability of a surface vehicle is also considered, and a constraint condition is introduced to improve the quality of the path planning algorithm, which makes the traveled path smoother. This study also shows a path planning experiment performed on a real satellite thermal image, and the path planning results can be used by an USV.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_3
• /
• pp.1013-1025
• /
• 2020

Unmanned Aerial Vehicle (UAV) platform is being widely used in disaster monitoring and smart city, having the advantage of being able to quickly acquire images in small areas at a low cost. Ground Control Points (GCPs) for positioning UAV images are essential to acquire cm-level accuracy when producing UAV-based orthoimages and Digital Surface Model (DSM). However, the on-site acquisition of GCPs takes considerable manpower and time. This research aims to provide an efficient and accurate way to replace the on-site GNSS surveying with three different sources of geospatial data. The three geospatial data used in this study is as follows; 1) 25 cm aerial orthoimages, and Digital Elevation Model (DEM) based on 1:1000 digital topographic map, 2) point cloud data acquired by Mobile Mapping System (MMS), and 3) hybrid point cloud data created by merging MMS data with UAV data. For each dataset a three-dimensional positional accuracy analysis of UAV-based orthoimage and DSM was performed by comparing differences in three-dimensional coordinates of independent check point obtained with those of the RTK-GNSS survey. The result shows the third case, in which MMS data and UAV data combined, to be the most accurate, showing an RMSE accuracy of 8.9 cm in horizontal and 24.5 cm in vertical, respectively. In addition, it has been shown that the distribution of geospatial GCPs has more sensitive on the vertical accuracy than on horizontal accuracy.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.6
• /
• pp.586-595
• /
• 2022

In this paper, we propose a formation control algorithm for multi-USVs according to COLREGs. First, we applied the Dynamic Window Approach algorithm that can reflect the kinematic characteristics for the path movement of USVs. Then, we propose a virtual structure-based virtual leader-follower method that applies the advantages of leader-follower and virtual structure methods among conventional formation control algorithms for stability. Next, we proposed a collision avoidance algorithm according to all COLREGs when encountering an opposing ship by adding COLREGs situational conditions to the virtual leader, and finally confirmed the feasibility of the proposed method through simulation.

• Advances in robotics research
• /
• v.2 no.2
• /
• pp.161-182
• /
• 2018

This paper proposes a novel receding horizon control (RHC) algorithm for formation control of a swarm of unmanned surface vehicles (USVs) using particle swarm optimization (PSO). The proposed control algorithm provides the coordinated path tracking of multi-agent USVs while preventing collisions and considering external disturbances such as ocean currents. A three degrees-of-freedom kinematic model of the USV is used for the RHC with guaranteed stability and convergence by incorporating a sequential Monte Carlo (SMC)-based particle initialization. An ocean current model-based estimator is designed to compensate for the effect of ocean currents on the USVs. This method is compared with the PSO-based RHC algorithms to demonstrate the performance of the formation control and the collision avoidance in the presence of ocean currents through numerical simulations.