• 한국산업정보학회논문지
• /
• 제4권1호
• /
• pp.58-62
• /
• 1999

본 논문은 엔진마운트에서 주기적인 미지의 외란에서 나타나는 시스템의 입출력으로부터의 시스템 동특성을 인식할 수 있는 응용가능성을 보여 주고자 한다. 일반적으로 외란 진동과 파장형태는 확실히 알려져 있지 않고 임의적으로 발생되고 있다. 단지 제어량인 입력과 외란이 섞여 있는 출력측정량만이 시스템인식을 위하여 사용될 뿐이다. 보다 일반화되어 개발된 시스템인식기술 알고리즘은 승용차 능동엔진마운트의 진동제어를 위하여 능동제어에 앞선 미지의 주기적외란을 포함한 동특성시스템에서의 수학적 모의시험을 통하여 시스템인식기술의 완벽성을 나타내고 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.159-162
• /
• 1997

This paper describes robust stabilization of nonlinear single-input uncertain systems without matching conditions. We consider nonlinear systems with a vector of unknown constant parameters perturbed about a known value. The approach utilizes the generalized controller canonical form to lump the unmatched uncertainties recursively into the matched ones. This can be achieved via nonlinear coordinate transformations which depend not only on the states of the nonlinear system but also on the control input. Then the dynamic robust control law is derived and the stability result is also presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1169-1172
• /
• 1996

A time-optimal control law for quick, strongly nonlinear systems has been developed and demonstrated. This procedure involves the utilization of neural networks as state feedback controllers that learn the time-optimal control actions by means of an iterative minimization of both the final time and the final state error for the known and unknown systems with constrained inputs and/or states. The nature of neural networks as a parallel processor would circumvent the problem of "curse of dimensionality". The control law has been demonstrated for a velocity input type motor identified by a genetic algorithm called GENOCOP.

• Journal of Advanced Marine Engineering and Technology
• /
• 제11권2호
• /
• pp.61-70
• /
• 1987

미지의 조작량이나 매우 큰 외란이 입력으로 작용하고 있는 동력시스템의 정도 높은 상태를 추정하려면 상태추정에 앞서 시스템의 입력추정이 요구된다. 본 논문에서는 간략형 칼만필터 (SKF:Simplified Kalman Filter)를 이용하여 운동하고 있는 목표물의 상태추정을 행함과 동시에 기동탐지자 (Maneuvering Detector)와 입력추정자 (Input Estimator)에 의해 시스템의 입력을 추정하고 이것에 의하여 SKF의 추정치를 보정해줌으로써 입력이 미지인 동적 시스템의 상태추정에 있어서 추정정도를 개선하는 방법을 제안하며 디지탈계산기를 이용한 시뮤레이션을 통하여 본 방법의 유효성을 밝힌다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.256-260
• /
• 2003

A computer program to calculate thermodynamic properties of oxygen is developed. Procedures for the calculation is briefly discussed. The program calculates unknown thermodynamic properties fixing the state with two independent input properties. If input value by user is inappropriate, it displays an error message. In addition user can change units with easy. The program developed in this work can be utilized to calculate parameters required for the simulation and design of an equipment using oxygen.

• 한국통신학회논문지
• /
• 제25권10B호
• /
• pp.1769-1776
• /
• 2000

In this paper a new method is proposed to identify a modulation method in the case of unknown digitally modulated input signals. The proposed identification method is implemented with an artificial neural network which is based on characteristic feature extracted from the instantaneous amplitude the instantaneous phase and the instantaneous frequency of the input signals. The proposed method was simulated with 9 type signals (ASK2, FSK2, FSK4, PSK2, PSK4, PSK8, QAM8, QAM16) in a noisy communication environment. The results show that the artificial neural network can accurately recognize all kinds of patterns.

• 대한전자공학회논문지TC
• /
• 제43권2호
• /
• pp.39-43
• /
• 2006

본 논문은 잡음이 존재하는 미지 시스템 출력 신호의 3차 통계치인 cumulant를 이용한 AR 식별에 관한 것이다. 미지 시스템 식별을 위한 알고리즘에서는 Parametric Modeling 기법중에서 Global Convergence 보장 및 시스템의 진폭과 위상 정보를 모두 표현할 수 있는 Cumulant를 이용한 AR (Auto Regressive) 식별 방법을 적용하였다. 식별 과정에서 미지 시스템을 하나의 AR 시스템으로 간주하였고 입력 신호를 발생하여 이를 통과시킨 후 잡음이 부가된 출력 신호를 얻어 이를 이용하였다. 신호대 잡음비의 변화에따른 AR 시스템의 식별을 수행한 결과 원래의 시스템 출력치와 유사한 양호한 식별 결과를 얻을 수 있었고 극점이 z 변환의 단위원내에 존재함을 확인하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 춘계학술발표논문집
• /
• pp.307-310
• /
• 2006

We consider the problem of constructing observers for nonlinear systems with unknown inputs. It is shown that under some conditions, there exists an observer estimating the states of nonlinear systems with unknown inputs. Nonlinear observer design method using observer error linearization and the design technique of unknown input observer(UIO) for linear systems are used to derive conditions. Some illustrative examples are included. In this paper, a direct controller for nonlinear plants using a neural network is presented. The controller is composed of an approximate controller and a neural network auxiliary controller.The approximate controller gives the rough control and the neural network controller gives the complementary signal to further reduce the output tracking error. This method does not put too much restriction on the type of nonlinear plant to be controlled. In this method, a RBF neural network is trained and the system has a stable performance for the inputs it has been trained for. Simulation results show that it is very effective and can realize a satisfactory control of the nonlinear system

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.898-901
• /
• 1988

Up to now, using adaptive control method, Identification deals with system whose entire state variables and prameters are accessible for measurement. In practical situations, all the state variables cannot be measured and it is impossible to directly apply since the parameters of the system are unknown. Therefore, in this paper, using only input-output data, such a model of the system is not available since the parameters of the system are unknown. this leads to the concept of an adptive observer in which both the parameters and the state variable of the system are identified simultaniously. Lyapunov's direct method and Kalman-Yakubovich (K-Y) lemma are employed to ensure the stability of this schemes. The feature is that the signal and adaptive gain which is generated from filter is imposed upon feedback vector and then state variables and the unknown parameters can be identified. To show the usefulness of the proposed schemes, computer simulation result of unknown second-order system shows the effectiveness of the proposed schems.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.66-76
• /
• 2003

The arbitrary V-notched crack problem is considered. The general expressions for the stress components on this problem are obtained as explicit series forms composed of independent unknown coefficients which are denoted by coefficients of eigenvector. For this results eigenvalue equation is performed first through introducing complex stress functions and applying the traction free boundary conditions. Next solving this equation, eigenvalues and corresponding eigenvectors are obtained respectively, and finally inserting these results into stress components, the general equations are obtained. These results are also shown to be applicable to the symmetric V-notched crack or straight crack. It can be shown that this solutions are composed of the linear combination of Mode I and Mode II solutions which are obtained from different characteristic equations, respectively. Through performing asymptotic analysis for stresses, the stress intensity factor is given as a closed form equipped with the unknown coefficients of eigenvector. In order to calculate the unknown coefficients. based on these general explicit equations, numerical programming using the overdetermined boundary collocation method which is algorithmed originally by Carpenter is also worked out. As this programming requires the input data, the commercial FE analysis for stresses is performed. From this study, for some V-notched problems, unknown coefficients can be calculated numerically and also fracture parameters are determined.