• 마이크로전자및패키징학회지
• /
• 제9권4호
• /
• pp.61-68
• /
• 2002

지금까지 전자 디바이스의 솔더접합부에 대한 신뢰성 평가에 있어서는 열충격시험에 의한 평가가 주류를 이루었다. 그러나 최근 모바일 제품이 소형화/다기능화되고 고밀도실장에 대한 요구가 증가함에 따라 BGA/CSP와 같은 솔더볼을 사용하는 패키지가 표면실장의 주류를 이루게 되었으며, 솔더접합부에 대한 메커니컬 스트레스 수명이 요구되어지고 있다. BGA/CSP의 솔더접합부에 대한 신뢰성 평가는 하중을 가한 상태에서 데이지체인 패턴의 전기적 저항변화와 스트레인 게이지에 의한 스트레스-스트레인 커브에 의해 행해진다. 본 연구에서는 자체 개발한 PCB만능시험장치의 응용과 솔더접합부에 대한 메커니컬 스트레스의 동적거동을 평가한 소니의 실험자료를 소개하도록 한다.

• International Journal of Advanced Culture Technology
• /
• 제11권2호
• /
• pp.10-29
• /
• 2023

Grit or perseverance as a factor for student success and life has gained increasing attention. Statistical methods have been the norm in analyzing various aspects of grit, but they do not address the transient and dynamic behavior well. We, for the first time, developed two linear dynamical models that specifically address the feedback structure of a child's desire to achieve a high grade point average (GPA) and the necessary effort that will increase stress between parents and a child. We call the dynamical model as GSES (Goal, Status, Effort & Stress). The two dynamical models incorporate the positive (i.e., achieving a high GPA) and the negative sides (i.e., effort and elevated stress and thus unhappiness) for being gritty or perseverant. Different types of parenting style and a child's characteristics were simulated whether parents and a child are empathetic or stubborn to their expectations and stress (i.e., willing or unwilling to change). Simulations show that when both parents and a child are empathetic to each other's expectation and stress, the most stable situations with minimal stress and effort occur. When a stubborn parent's and a stubborn child were studied together, this resulted in the highest elevation of stress and effort. Stubborn parents and a complying or empathetic child resulted in considerably high stress to a child. Interference from parents may unexpectedly result in a situation in which a child's stress is seriously elevated. The GSES model shows the U-shaped happiness curve (i.e., reciprocal of stress) caused by the increasing and then decreasing goal

• Clinical and Experimental Pediatrics
• /
• 제48권11호
• /
• pp.1179-1186
• /
• 2005

목 적 : 재태 연령에 따른 신생아 출생체중의 정상치를 아는 것은 자궁내 발육부전과 과출생 체중아를 진단하여 의사들은 고위험 신생아를 조기에 진단하고 치료하여 이들의 유병률과 사망률을 줄일 수 있고, 의료정책 입안자들은 이들에 대한 적절한 의료서비스의 개발과 건강관리 프로그램을 개발하고 시행하는데 도움을 줄 수 있다. 이에 저자들은 우리나라의 재태 연령에 따른 출생체중의 기준치를 구하고자 본 연구를 시행하였다. 방 법 : 2001년 1월 1일부터 2003년 12월 31일까지 3년간 통계청의 인구동태자료 중 출생 자료에 기록되어 있는 1,552,375명 중 재태 연령이 24주에서 44주 사이의 단태아 1,509,763명을 대상으로 재태 연령에 따른 평균값과 표준편차를 구하고 10, 25, 50, 75, 90 백분위수를 구하였다. 또한 각 재태 연령별 분포곡선이 정규분포를 따르는지 알아보았다. 이중 정규분포를 따르지 않거나 쌍봉형을 나타내는 재태 연령에서 유한 혼합 모델을 이용하여 오류의 값을 제거하고 다시 평균과 표준편차 그리고 10, 25, 50, 75, 90 백분위수를 구하고 이에 따른 곡선을 그렸다. 결 과 : 원시자료를 통해 얻은 재태 연령에 따른 출생체중 곡선은 27주에서 32주 사이에 심한 혹이 나타난다. 이에 따라 재태 연령별 출생체중의 분포를 그렸을 때 24주에서 27주까지는 우측으로 긴 꼬리를 가지는 치우친 곡선을 보였고 28주에서 32주까지는 상봉형의 곡선을 보였다. 그리고 그 이후에는 거의 정규 분포를 따르는 곡선을 보였다. 이는 33주 미만에서 재태 연령의 기록에 오류가 있음을 나타내는 것으로 저자들은 유한 혼합 모델을 이용해서 재태 연령별 출생체중 분포를 분석한 후 오류의 부분을 제거 후 재태 연령에 따른 출생체중 곡선을 완성하였다. 이렇게 완성된 출생체중 곡선은 Lubchenco 등의 결과에 비해 10 백분위수에서 높은 값을 보였고 노르웨이나 북미의 연구 결과에 비해서는 전반적으로 낮은 값을 보였다. 결 론 : 본 연구에서 얻은 재태 연령에 의한 출생체중의 기준치와 곡선은 3년간 우리나라의 출생아 전수를 대상으로 오류를 객관적인 기준에 의해 제거하여 만든 것이다. 그러므로 우리나라를 대표하난 신생아의 재태 연령에 의한 출생체중의 기준 및 자궁내 발육부전이나 과출생 체중아의 진단의 기준으로 사용 할 수 있으리라 생각된다.

• 한국결정성장학회지
• /
• 제11권5호
• /
• pp.197-202
• /
• 2001

여러 조건에서 제조된 poly(ethylene terephthalate) 필름 시편들로부터 열처리 및 냉연신 조건이 시편의 물성에 미치는 영향을 조사하였다. 상온에서 만능시험기을 사용하여 미열처리 및 열처리된 시편들을 0.5에서 500 mm/min의 cross-head 속도로 단계적 연신을 행한 결과, 약 50, 72 및 $129^{\circ}C$에서 열처리된 시편들의 응력-변형 곡선에서는 응력 진동이 발생되지만, 약 $83^{\circ}C$에서 30분 동안 열처리된 시편의 응력-변형 곡선에서는 응력 진동이 발생되지 않음을 알 수 있었다. 시차 주사 열량기를 사용하여 $10^{\circ}C$/min의 승온 속도에서 열분석을 행하였고, 시편들의 유리전이온도, 결정화 피크, 용융 잠열, 결정화도를 측정하였다. 1 Hz의 주파수대에서 $1.5^{\circ}C$/min의 승온 속도로 multiple-function internal friction pendulum으로 시편들의 동적 기계분석도 수행하였으며, 미열처리, 열처리 및 연신 시편들의 순서대로 탄성계수 값이 증가함을 알 수 있었다.

• 동의생리병리학회지
• /
• 제19권6호
• /
• pp.1673-1675
• /
• 2005

The pulse diagnosis is an important and universal method in Oriental medicine. Nevertheless, because of characteristic that depends on subjective sense of Oriental medicine doctor (OMD), it is not recognized by objective basis. The Korean Institute of Oriental Medicine(KIOM) and Daeyo Medi. Co. Ltd. developed the 3-D Mac using arrey piezoresistive sensors and multi-axial robot. 133 healthy subjects participated in this study, 75 males and 58 females, between 20 and 70 years of age. All subjects were relaxed in a supine position on a comfortable chair for twenty minutes before the measurement was taken. The measured position is the radial artery of subject's left wrist and the position is called Chon, Kwan and Chuck in Oriental medicine. To detect floating and sinking pulse, we established coefficient of floating and sinking(CFS). CFS means relative position of maximum pulse pressure in PH curve. The lower CFS value means that the pulse has floating tendency. There was significant diffence between CFS and diagnosis of floating-sinking pulse by OMD(p=0.020). CFS value of over 40's group was significantly larger than those of 20's and 30's(p=0.000). There was no significant difference between male and female(p=0.061).

• 한국물환경학회지
• /
• 제33권6호
• /
• pp.744-753
• /
• 2017

The sediment delivery ratio (SDR) is widely used to estimate sediment loads by multiplying soil loss through the Revised Universal Equation (RUSLE). In this study, the SDR equation was developed for the Lake Imha watershed using soil loss calculated by RUSLE and sediment loads by the calibrated Hydrological Simulation. Program Fortran (HSPF). The ratio of watershed relief and channel length ($R_f/L_{ch}$), the ratio of watershed relief and watershed length ($R_f/L_b$), curve number (CN), area (A), and channel slope ($SLP_{ch}$) demonstrated strong correlations with SDR. SDR equations were developed by a combination of subwatershed parameters by referring to the correlation analysis. The area based power functional SDR developed in this study showed significant errors at the point right after entering major tributaries, because SDR was unrealistically reduced when the watershed area increased significantly. The $SLP_{ch}$-based power functional SDR also showed extraordinary values when the channel slope was gradual. The SDR equation that showed the highest value of the coefficient of determination also presented unrealistic changes in the sediment loads within a relatively short river distance. The SDR equation $SDR=0.0003A^{0.198}R_f/L{_w}^{1.167}$ was recommended for application to the Lake Imha watershed. Using this equation, sediment loads at the outlet of the Lake Imha watershed were calculated, and the HSPF parameters related to sediment in the uncalibrated subwatersheds were determined by referring to the sediment loads calculated with the SDR equation.

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.3802-3807
• /
• 2011

본 연구에서는 알루미늄 폼 및 허니컴 샌드위치 복합재료의 면내 외 압축실험을 수행하였다. 실험을 통하여 하중-변위의 관계를 분석하고 압축 특성을 비교한다. 시험편은 만능재료시험기를 사용하여 1 mm/min로 압축을 하였다. 실험과정은 카메라로 촬영하고, 로드셀에서 나오는 데이터는 컴퓨터로 저장하였다. 실험결과를 보면 하중이 증가함에 따라 알루미늄 폼 및 허니컴 심재에 좌굴이 발생하였다. 면내 압축실험에서 알루미늄 폼 및 허니컴 샌드위치 시험편의 압축 최대하중은 비슷하였다. 그러나 비중을 고려하면 허니컴이 폼보다 압축 특성이 더 우수하다. 면외 압축실험에서도 알루미늄 허니컴 샌드위치 복합재료의 압축 최대하중이 알루미늄 폼 샌드위치 복합재료보다 높게 나왔다.

• Smart Structures and Systems
• /
• 제23권6호
• /
• pp.537-551
• /
• 2019

In this paper, a method for analyzing the damping performance of stay cables incorporating magnetorheological (MR) dampers in the passive control mode is developed taking into account the cable sag and inclination, the damper coefficient, stiffness and mass, and the stiffness of damper support. Both numerical and asymptotic solutions are obtained from complex modal analysis. With the asymptotic solution, analytical formulas that evaluate the equivalent damping ratio of the sagged cable-damper system in consideration of all the above parameters are derived. The main thrust of the present study is to develop an general design formula and a universal curve for the optimal design of MR dampers for adjustable passive control of sagged cables. Two sag-affecting coefficients are derived to reflect the effects of cable sag on the maximum attainable damping ratio and the optimal damper coefficient. For the cable configurations commonly used in cable-stayed bridges, the sag-affecting coefficients are directly expressed in terms of the sag-extensibility parameter to facilitate the control design. A case study on adjustable passive vibration control of the longest cable (536 m) on Stonecutters Bridge is carried out to demonstrate the influence of the sag for the damper design, and to figure out the necessity of adjustability of damper coefficients for achieving maximum damping ratio for different vibration modes.

• Journal of Radiation Protection and Research
• /
• 제43권4호
• /
• pp.160-169
• /
• 2018

Background: This study aims to develop an integrated optical system that can simultaneously or selectively measure the signals obtained from radioluminescence (RL), thermoluminescence (TL), and optically stimulated luminescence (OSL), which are luminescence phenomena of materials stimulated by radioactivity, heat, and light, respectively. The luminescence mechanism of various materials could be investigated using the glow curves of the luminescence materials. Materials and Methods: RL/TL/OSL integrated measuring system was equipped with a X-ray tube (50 kV, $200{\mu}A$) as an ionizing radiation source to irradiate the sample. The sample substrate was used as a heating source and was also designed to optically stimulate the sample material using various light sources, such as high luminous blue light emitting diode (LED) or laser. The system measured the luminescence intensity versus the amount of irradiation/stimulation on the sample for the purpose of measuring RL, TL and OSL sequentially or by selectively combining them. Optical filters were combined to minimize the interference of the stimulation light in the OSL signal. A long-pass filter (420 nm) was used for 470 nm LED, an ultraviolet-pass filter (260-390 nm) was used for detecting the luminescence of the sample by PM tube. Results and Discussion: The reliability of the system was evaluated using the RL/OSL characteristics of $Al_2O_3:C$ and the RL/TL characteristics of LiF:Mg,Cu,Si, which were used as dosimetry materials. The RL/OSL characteristics of $Al_2O_3:C$ showed relatively linear dose-response characteristics. The glow curve of LiF:Mg,Cu,Si also showed typical RL/OSL characteristics. Conclusion: The reliability of the proposed system was verified by sequentially measuring the RL characteristics of radiation as well as the TL and OSL characteristics by concurrent thermal and optical stimulations. In this study, we developed an integrated measurement system that measures the glow curves of RL/TL/OSL using universal USB-DAQs and the control program.

• Journal of Korean Neurosurgical Society
• /
• 제66권4호
• /
• pp.382-392
• /
• 2023

Objective : The use of indocyanine green videoangiography (ICG-VA) to assess blood flow in the brain during cerebrovascular surgery has been increasing. Clinical studies on ICG-VA have predominantly focused on qualitative analysis. However, quantitative analysis numerical modelling for time profiling enables a more accurate evaluation of blood flow kinetics. In this study, we established a multiple exponential modified Gaussian (multi-EMG) model for quantitative ICG-VA to understand accurately the status of cerebral hemodynamics. Methods : We obtained clinical data of cerebral blood flow acquired the quantitative analysis ICG-VA during cerebrovascular surgery. Varied asymmetric peak functions were compared to find the most matching function form with clinical data by using a nonlinear regression algorithm. To verify the result of the nonlinear regression, the mode function was applied to various types of data. Results : The proposed multi-EMG model is well fitted to the clinical data. Because the primary parameters-growth and decay rates, and peak center and heights-of the model are characteristics of model function, they provide accurate reference values for assessing cerebral hemodynamics in various conditions. In addition, the primary parameters can be estimated on the curves with partially missed data. The accuracy of the model estimation was verified by a repeated curve fitting method using manipulation of missing data. Conclusion : The multi-EMG model can possibly serve as a universal model for cerebral hemodynamics in a comparison with other asymmetric peak functions. According to the results, the model can be helpful for clinical research assessment of cerebrovascular hemodynamics in a clinical setting.