• 대한건축학회논문집:구조계
• /
• 제34권10호
• /
• pp.19-26
• /
• 2018

The purpose of this study was to analyze characteristics and to develop estimation model of IHG(Internal Heat Gain) from appliance in domestic apartment units. To do this, it was defined the source of IHG from appliance and the calculation method through the case study of international and domestic codes. And the equipment related datum such possession, usage or not, etc were collected through field survey in apartment units, and the appliances' electricity consumption were measured separately from overall electricity consumption. Annual electricity consumption value were calculated with field survey datum and appliances' electricity consumption measurement datum, and then IHG value was calculated by applying PHPP v9 method. And it was conducted correlation analysis between IHG value and the area for exclusive use, the number of occupants, and then the IHG from applianace estimation model was deducted with regression analysis. Finally, it was analyzed the present level and of the domestic code(The Building Energy Efficiency Rating System) comparing with the value of estimation model, and the various international codes(HERS, Building America, SAP).

• 한국정보시스템학회지:정보시스템연구
• /
• 제19권2호
• /
• pp.23-36
• /
• 2010

The focus of this study is to analyze between South Korea and China in terms of diversity in Management Information Systems research. As a result, there is herding phenomenon regarding researches in both of the countries compared to other previous studies. There also seemed to be lack of in-depth study of basic theories and connection to related field of study considering the broad topics of management information, unlike other international journals that pursue diversity in control referencing various methodologies, analysis units and many citations. Therefore, both South Korea and China should stabilize theoretical base of MIS through securing independent field of MIS along with founding the fundamentals by searching in diversified fields, methodologies and analysis units with focused topics. The upshot here is that with respect to diversity in MIS from both countries, to alleviate herding phenomenon, enforcing accuracy of data collection and reducing convenience pursuit should be implemented. Also as criteria to select a topic, different kinds of consulting concepts and taking social issues into consideration that helps tool development and analysis power should be done. Through varied methodologies, tool development and analysis power should be assisted and analysis unit should be shifted to organization unit for Korea and team or individual for China only to augment the accessibility. As a limitation for the paper is that the data used in this analysis is secondary data. In addition, although time period used in both countries were the same, object of analysis had homogeneity in Korean case while Chinese one having heterogeneity from 19 different journals. For the future studies, multicultural comparison or time series analysis and their comparison in deeper approach with regard to object of analysis and methodologies can contribute to further MIS diversity.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.386-392
• /
• 2021

MACCS (MELCOR Accident Consequence Code System), WinMACCS, and MelMACCS now facilitate a multi-unit consequence analysis. MACCS evaluates the consequences of an atmospheric release of radioactive gases and aerosols into the atmosphere and is most commonly used to perform probabilistic safety assessments (PSAs) and related consequence analyses for nuclear power plants (NPPs). WinMACCS is a user-friendly preprocessor for MACCS. MelMACCS extracts source-term information from a MELCOR plot file. The current development can combine an arbitrary number of source terms, representing simultaneous releases from a multi-unit facility, into a single consequence analysis. The development supports different release signatures, fission product inventories, and accident initiation times for each unit. The treatment is completely general except that the model is currently limited to collocated units. A major practical consideration for performing a multi-unit PSA is that a comprehensive treatment for more than two units may involve an intractable number of combinations of source terms. This paper proposes and evaluates an approach for reducing the number of calculations to be tractable, even for sites with eight or ten units. The approximation error introduced by the approach is acceptable and is considerably less than other errors and uncertainties inherent in a Level 3 PSA.

• 반도체디스플레이기술학회지
• /
• 제15권1호
• /
• pp.36-40
• /
• 2016

This paper is about the analysis on the vibration characteristic of tooling units on the precision automatic lathe. The vibration characteristic of the machine tool is emphasized in accordance with the high precision of the various industries Including the various semiconductor devices and components sector. In this paper, the vibration analysis was performed in designed tooling units of precision automatic lathe. Through the analysis, it is calculated that the frequency of distribution in certain areas by review the resonant frequency and the amount of deformation. And designed model was verified to be a stable structure.

• The Journal of Advanced Prosthodontics
• /
• 제15권1호
• /
• pp.1-10
• /
• 2023

PURPOSE. Accuracy of image matching between resting and smiling facial models is affected by the stability of the reference surfaces. This study aimed to investigate the morphometric variations in subdivided facial units during resting, posed and spontaneous smiling. MATERIALS AND METHODS. The posed and spontaneous smiling faces of 33 adults were digitized and registered to the resting faces. The morphological changes of subdivided facial units at the forehead (upper and lower central, upper and lower lateral, and temple), nasal (dorsum, tip, lateral wall, and alar lobules), and chin (central and lateral) regions were assessed by measuring the 3D mesh deviations between the smiling and resting facial models. The one-way analysis of variance, Duncan post hoc tests, and Student's t-test were used to determine the differences among the groups (α = .05). RESULTS. The smallest morphometric changes were observed at the upper and central forehead and nasal dorsum; meanwhile, the largest deviation was found at the nasal alar lobules in both the posed and spontaneous smiles (P < .001). The spontaneous smile generally resulted in larger facial unit changes than the posed smile, and significant difference was observed at the alar lobules, central chin, and lateral chin units (P < .001). CONCLUSION. The upper and central forehead and nasal dorsum are reliable areas for image matching between resting and smiling 3D facial images. The central chin area can be considered an additional reference area for posed smiles; however, special cautions should be taken when selecting this area as references for spontaneous smiles.

• Journal of Biosystems Engineering
• /
• 제34권1호
• /
• pp.57-62
• /
• 2009

Kinematic analysis of MTC (Muscle-Tendon Complex) units is a key indicator for diagnosis of patients with musculoskeletal disorders because the contracture or shortening of musculo-tendinous units is known to produce pathological gaits. Therefore, the principal objective of this study was to assess the length change in the triceps surae prior to and after wearing an AFO (Ankle-Foot Orthoses) in patients with musculoskeletal disorders during a gait. In this study, analyses were conducted using a Muscle Tendon Complex model coupled with the trajectory data from markers attached to anatomical landmarks. As a result, the maximum length change in the triceps surae during a gait was 4.87% when a barefoot walking group and a walking group with AFO were compared. In particular, the difference in length changes between both groups in Soleus MTC units was found to be statistically significant in all gait phases. Our results revealed that MTC length in the AFO walking group was clearly increased over that of the barefoot walking group. In the future, further studies will be required in order to more adequately assess musculoskeletal disorders using many cases studies with regard to agricultural working conditions because this study deals with the kinematic analysis of musculo-tendinous units in the case of clinical experiments.

• 대한치과기공학회지
• /
• 제35권4호
• /
• pp.303-312
• /
• 2013

Purpose: In this research, non-linear three dimensional finite element models with contact elements were constructed. For the investigations of the distributions of contact stresses, 3 units fixed partial dentures model were studied, especially on the interface of the gold screw and cylinder, abutment screw. Methods: 3 types of models were constructed ; the basic fixed partial denture in molar region with 3 units and 3 implants, the intermediate pontic fixed partial denture model with 3 units and 2 implants, and the extension pontic fixed partial denture model with 3 units and 2 implants. For all types, the external loading due to chewing was simulated by applying $45^{\circ}$ linguo-buccal loading of 300 N to the medial crown. For the simulation of the clamping force which clinically occurs due to the torque, thermal expansion was provided to the cylinder as a preload. Results: Under 300 N concentrated loading to the medial crown, the maximum contact stress between abutment screw and gold screw was 86.85~175.86MPa without preload, while the maximum contact stress on the same area was 25.59~57.84MPa with preload. Conclusion: The preloading affected the outcomes of the finite element stress analysis. Reflecting the clinical conditions, the preloading conditions should be considered for other practical study utilizing FEA. For the study of the contact stresses and related motions, various conditions, such as frictional coefficient changes, gap between contact surfaces, were also varied and analyzed.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2006년도 추계공동학술대회
• /
• pp.415-426
• /
• 2006

Many technical and nontechnical issues hinder enterprise wide workflow management. The most significant technical issue is the inability to deal with the heterogeneity among users, workflow types, and WFMSs. Not all users demand the same workflow functionality, so user interfaces of different levels of sophistication are required. Because workflow types cannot always be fully predefined, they often need to be adjusted or extended during execution. Unlike relational database management systems, however, each WFMS often has differing workflow metamodels. This leads to incompatibility between WFMSs, making integration into an environment comprising many heterogeneous WFMSs a troublesome and sometimes impossible task. Current Workflow system consists mainly of Database system. It contains some problems like that the integration relationship among system processes cant be expressed properly. This research has been focused on two phases that should be considered in the Workflow system. First of all, the first phase is the analysis phase; one of its role is to figure out independent execution task unit(Workflow component). The second phase is design phase that provides with the framework to execute these task units actively. The Workflow component extraction method in the analysis phase uses a analysis method called C-C Net and, in the design phase, the architecture that makes the these Workflow component executed actively is provided. Through this research, each process is divided into a task unit and more effective Workflow system could be formed by executing these units actively. Current system layer calls task units, on the other hand, the Workflow system this research implemented provides with the architecture that places a layer between them that controls task units actively.

• 한국환경생태학회지
• /
• 제33권6호
• /
• pp.722-733
• /
• 2019

본 연구는 계룡산국립공원 공원문화유산지구로 지정된 동학사, 갑사, 신원사를 대상으로 식물사회학적 식생조사자료를 바탕으로 식생구조를 파악하여 생태적 특성을 구명하여 사찰림의 생태적 보전관리 방안을 마련하는데 기초 자료를 제공하고자 2018년 9월부터 2019년 5월까지 총 29개소의 산림식생조사를 수행하였다. 계층적 군집분석 결과, 느티나무-으름덩굴-황매화군락(VU1), 졸참나무-작살나무-까치박달군락(VU2), 소나무-산벚나무-쇠물푸레나무군락(VU3)으로 식생유형이 각각 구분되었으며, 각 식생단위별 지표종은 각각 12분류군, 8분류군, 6분류군으로 나타났다. 중요치 분석 결과, 모든 식생단위에서 느티나무의 중요치가 가장 높게 나타났으며, 종다양도 분석 결과, 식생단위 3의 종다양도가 0.939으로 다른 식생단위와 비교하였을 때 상대적으로 높게 나타났다. 식생유형과 무생물적입지환경, 생물적입지환경과의 상관관계분석을 CCA를 통해 분석한 결과, 무생물적 환경인자와의 관계는 식생단위 2와 해발고도가 음의 상관관계를 가지는 경향을 보였으며, 생물적 환경인자와의 관계에서는 뚜렷한 상관관계가 나타나지 않았다.

• 디지털융복합연구
• /
• 제4권2호
• /
• pp.67-73
• /
• 2006

This paper is an analysis of the Category Individual Residence urban spatial structure along the National Route BO (Koushu-Kaido), one of the major roads in Japan, and the degree of differences between locations and its changes between the points of time. The analysis was based on the GIS technique. Whilst, previous studies were based on municipal boundaries or mesh units as sources of data, GIS allowed the use of variable geographical units, Roadside zone, Inner zone, North zone, South zone, Blocks. As an example to apply the technology of GIS, 1986's and 1991's building polygon data of the Urban Planning Bureau of Tokyo Metropolitan Government are used. The layers referred to the analyses is the building polygons with the amount of stories, building area, floor area and the material of the building. Two statistical analysis are executed; one is the test of the regional equality about the number of story of building, building area, floor area and fireproof building ratio.