Analysis on Vibration Characteristic of Tooling Unit on Precision Automatic Lathe

정밀 자동선반 공구 유닛의 진동특성 해석

  • 주강우 (한국기술교육대학교 메카트로닉스공학부) ;
  • 이윤철 (한국기술교육대학교 메카트로닉스공학부) ;
  • 이영식 ((주)대성하이텍) ;
  • 손정종 ((주)대성하이텍) ;
  • 이재권 ((주)대성하이텍) ;
  • 김광선 (한국기술교육대학교 메카트로닉스공학부)
  • Received : 2016.02.22
  • Accepted : 2016.03.23
  • Published : 2016.03.31

Abstract

This paper is about the analysis on the vibration characteristic of tooling units on the precision automatic lathe. The vibration characteristic of the machine tool is emphasized in accordance with the high precision of the various industries Including the various semiconductor devices and components sector. In this paper, the vibration analysis was performed in designed tooling units of precision automatic lathe. Through the analysis, it is calculated that the frequency of distribution in certain areas by review the resonant frequency and the amount of deformation. And designed model was verified to be a stable structure.

Keywords

References

  1. Park. C. H., Kim. J. U., Wang. D. H., and Kim. W. I., 2005, "Development of Electrode Guide of Superdrill EDM and Electrical Discharge Machining of Small Hole for High Precision Semiconductor Die", Journal of the KSMPE, Vol.4, No.3, pp.32-38.
  2. Choi. S. G., Kim. S. H., Choi. W. K., Shin. H. J., Lee. E. S., and Kim. K. D., "A Study in the Modal Analysis of Hybrid Vertical Grinding System Bed", Journal of the KSMTE, Vol. 12, No. 5, pp,50-56, 2013
  3. 2015, Star-CCM User Guide ver.10.02, CD-adapco.
  4. Ferdinand P. Beer, E. Russell Johnston, Jr., and John T. DeWolf, 2004, "Mechanics of Materials" 3rd Edition, Mcgraw-Hill, PP.47-56.
  5. J. Douglas Faires and Richard Burden, 2003, "Numerical Methods", 3rd Edition, INTER VISION.
  6. Kang-Woo Joo, Jun-Young Kim, Hee-Rak Beom, and Kwang-Sun Kim, 2011, "Numerical Analysis on Thermal Deformation of Linear Motor in Chip Mounter", Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition.