• 전기학회논문지P
• /
• 제64권4호
• /
• pp.291-296
• /
• 2015

Transmission line is exposed to a large area, and then faults are likely to occur than the other component of power system. When a fault occurs on a transmission line, fault locator helps fast recovery of power supply on power system. This paper deals with the design of a digital fault locator for improvement accuracy of the fault distance estimation and a fault occurrence position for transmission line. The algorithm of a fault locator uses a DC offset removal filter and DFT filter. The algorithm utilizes a fault data of GPS time synchronized. The computed fault information is transmitted to the other side substation through communication. The digital fault locator includes MPU module, ADPU module, SIU module, and a power module. The MMI firmware and software of the fault locator was implemented.

• 대한의용생체공학회:의공학회지
• /
• 제13권4호
• /
• pp.269-274
• /
• 1992

In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.raph.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.24-27
• /
• 2008

For high voltage DC-DC converters, the parallel operation of several high voltage source modules is necessary to reduce the material cost. In the conventional parallel operation with HDC module control unit, it is difficult to repair the HDC system for the failure of control unit. To overcome these problems, new parallel operating algorithm for high voltage DC-DC converter is presented. The proposed algorithm has no main control unit and each module can be selected as the master according to the operating conditions. Therefore, one of modules can be replaced as the master immediately when the previous master module is failed. In addition, the extension of extra modules can be simple.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.411-414
• /
• 2015

The purpose of this study is to conduct a comparative analysis between Korea and the United States of the supply process of unit modular housing at both the factory production phase and the transportation and lifting phase, as part of an attempt to invigorate the unit modular housing market in Korea. Unlike the practice in the United States, one of Korea's unique characteristics is that the floor is constructed with reinforced concrete and hot water heating system. To do this, the wet method in Korea is used that includes concrete placement, curing and constructing hot water floor heating system at the factory production phase, which results in a longer production time and also requires the lifting of heavier loads. In the United States, interior and exterior finishing works of modular housing are performed by different companies, and the distance between the unit module factory and the construction site is quite far. This kind of dualized production structure may cause confusion when it comes to schedule management, procurement management, and stock management. Moreover, problems caused by external environmental factors such as wind and rainfall were reported in the course of long-distance transportation. The results of this case comparison are expected to provide fundamental data that will reduce the amount of trial and error in the unit module production, transportation and lifting work in Korea, which has a comparatively small number of unit modular housing cases.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2000년도 춘계학술대회 발표논문집
• /
• pp.193-200
• /
• 2000

In this paper, we consider confidence limits for steady state availability of a redundant structure with the function of switchover processing. The system considered in this paper consists of three units which are an active unit, a standby unit and a switchover device. A control module does not affect the performance of the system while the active unit is operating but causes the system failure if the active unit fails at the failure of the control module. The effect of failure of control module is included in our reliability model of the simple redundant structure. The availability of the system is obtained by using the state space method. An example is given to illustrate our results.

• 대한수학교육학회지:학교수학
• /
• 제11권3호
• /
• pp.431-462
• /
• 2009

본 연구에서는 지수의 역으로 정의되는 로그를 학습한 학생들을 대상으로 로그 개념과 성질에 대한 오류를 조사하고, 학생들 스스로 오류를 교정할 수 있도록 역사 발생적 수학 학습 지도 원리에 따른 교수-학습 모듈(module)을 개발하여 수행평가로 적용하고 그 교수학적 효과를 분석하였다. 교수-학습 모듈은 로그에 대한 수학적 분석, 역사발생적 과정에 대한 분석, 학생들의 오류에 대한 심리학적 분석을 바탕으로 로그의 정의와 기본 성질 단원을 중심으로 개발하였다. 교수-학습 모듈의 교수학적 효과는 로그의 뜻과 성질에 대한 사전 사후 지필 평가 결과의 정답률과 오류 발생률을 비교 분석하였다. 구체적으로 유의수준 .05에서 단일표본에 대한 t-검정 결과, 교수-학습 모듈을 적용한 수행평가가 짧은 시간동안 이루어졌음에도 효과가 있는 것으로 나타났다. 그리고 로그의 뜻과 성질 단원에서 나타난 5가지 오류 유형인 '기호나 용어, 개념에 대한 이해 부족으로 인한 오류(E1)', '정리나 성질에 대한 불완전한 이해로 인한 오류(E2)'와 '선행 지식의 부족으로 인한 오류(E3)', '계산 실수로 인한 오류(E4)', '풀이 과정의 중단으로 인한 오류(E5)' 중 교수-학습 모듈을 적용한 결과, E2와 E1 오류가 크게 개선되었다.

• 호남수학학술지
• /
• 제39권4호
• /
• pp.677-688
• /
• 2017

Let P be a finitely generated projective module over a commutative ring R with identity. If P has finite rank, then it will be shown that the map ${\varphi}:Aut_R(P){\rightarrow}U(R)$ defined by ${\varphi}({\alpha})={\det}({\alpha})$ is locally surjective and $Ker({\varphi})=SL_R(P)$.

• ETRI Journal
• /
• 제31권6호
• /
• pp.695-702
• /
• 2009

We propose a lens-drive unit composed of an ionic polymer-metal composite (IPMC) for an auto-focus compact camera module in cellular phones to solve the power consumption problem of voice coil motors which are widely used in commercial products. In this research, an IPMC incorporated into a lens-drive unit is designed to implement a large displacement in low-power consumption by using an anisotropic plasma treatment. Experimental results show that a camera module containing IPMCs can control and maintain the position of the lens by using proportional integral derivative control with a photo-reflective position sensor despite the non-linear actuation behavior of IPMCs. We demonstrate that the fabrication and commercialization of a lens actuator that has a large displacement and low power consumption using IPMCs is possible in the near future.

• 반도체디스플레이기술학회지
• /
• 제17권1호
• /
• pp.45-49
• /
• 2018

Portable microcontroller based measurement unit is demonstrated using digital-to-analog convertor module, analog-to-digital convertor module and additional preamplifier circuit with low-budget but excellent performances. Using the designed measurement unit, the measurement of current below 1 nA with applying voltage up to 5 V is successfully carried out. With the WiFi module in microcontroller, measured data is transferred to the user's computer. To evaluate the performance of the measurement unit, the transfer curve of a commercial N-type field effect transistor was measured with the measurement unit and the results is well consistent with that measured using commercial characterization system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.791-795
• /
• 2014

In this paper, in order to impart the aging condition of the parts, by configuring the cycle of temperature from low temperature was performed by applying the aging conditions for vehicle cockpit module. The reason for the selected modules of the cockpit vehicle parts, because the joint occurrence typical components of the room component is a first module and ceiling cockpit module. After setting the excitation profile using the BSR exciter only that this is for the module degradation after the initial and grasp the change in the dynamic characteristics of the modules based on the before and after deterioration may be made in the module, grasp the noise generating position I measured the noise and proximity. Was also visualized on the position of the joint is generated using a sound camera to objective results occurring where the joint is selected through subjective evaluation.