• 정보학연구
• /
• 제4권3호
• /
• pp.155-163
• /
• 2001

디지털 신경회로망의 구현에 있어 시그모이드 함수의 구현은 매우 복잡하고 구현하기 어렵다. 따라서, 본 논문에서는 디지털 신경회로망 구현에 문제가 되는 시그모이드 함수처리를 위한 설계 방법을 제안하였다. 제안된 방법은 잉여수계를 이용하여 MAC(Multiplier and Accumulator) 연산 시, 캐리 전파 없이 고속의 연산을 수행할 수 있고 시그모이드 함수처리를 고속으로 수행할 수 있다. 모의실험결과, 각각의 신경 프로세스에 있어서 4.6nsec 이상의 속도를 보임으로써 고속디지털 신경회로망 구현에 적용될 수 있을 것으로 기대된다.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.358-363
• /
• 2007

This paper presents a floating point unit(FPU) with 3 stages for a 3D graphics shader engine. It targeted to accelerate 3D graphics in portable device environments. In order to design a balanced architecture for a shader engine, we analyzed shader assembly instructions and estimated the performance of FPU with the method we propose. The proposed unit handles 4-dimensional data through separated two paths that are lead to general operation module and special function module. The proposed FPU is compiled as a form of the cascade FPU with 3 stages to efficiently handle a matrix operation with relatively low hardware overhead. Except some complex instructions that are executed using macro instructions, all instructions complete an operation in a single instruction cycle at 100MHz frequency. A special function module performs all operations in a single clock cycle using the Newton Raphson method with the look-up table.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.65-72
• /
• 2006

Downcoiler is one of the major facilities in hot strip mill operation. The key to good coiling is having good equipment, modem control systems, excellent maintenance and an understanding of coiling process. Therefore, this study aims to develop a program that is useful for calculating machine design parameters and simulating coiling process. In this study, the pinching and coiling mechanism of the downcoiler was thoroughly studied and some of operational factors and their effects on the coiling process were investigated. The software was developed to estimate engineering parameters for coiler component design and to determine optimal setting values for successful coiling operation. In order to check the accuracy and usefulness of the developed software, the simulation of the downcoiler in $\#2$ Hot Strip Mill in Pohang Works was performed. The simulation results suggested that the set-up value for unit tension could be lowered. Test coiling operation by using the lowered set-up value for unit tension resulted in much more successful coiling in the aspect of strip quality and power consumption.

• Nuclear Engineering and Technology
• /
• 제40권4호
• /
• pp.277-284
• /
• 2008

Recently, the long-term operation of a nuclear power plant beyond its licensed term has become a worldwide trend as long as the safety of the plant is maintained in the extended period. Kori Unit 1, the oldest PWR in Korea, is the foremost example of this type of long-term operation in Korea. Comprehensive technical evaluation of the long-term operation of this plant was completed to confirm the overall safety of the plant. The technical evaluation included a review of PSR results, an assessment on aging management programs and time limited aging analyses, and a statement of radiological impact on the environment. Based on all of the results of the technical evaluation activities, Kori Unit 1 was approved to operate for an additional 10 years beyond its original design life of 30 years.

• 상하수도학회지
• /
• 제22권5호
• /
• pp.541-550
• /
• 2008

In this investigative study, the unit mass discharge for the major water quality parameters such as flowrate, SS, BOD, CODmn, CODcr, TN, TP from textile spinning/weaving industry nearby Nakdong river basin was estimated. To represent the respective industries, three companies from hundreds of textile spinning/weaving industries located in Nakdong river basin was carefully selected based on its manufacturing goods, flowrate and location for the estimation of unit mass discharge based on unit operation and process. There was a drastic decrease of unit mass discharge estimation between influents and effluents of water quality parameters, which represents the removal capacity of wastewater treatment plant. With the advent of new regulation on the imposed payment proportional to the total amount of pollutants discharge into the water body, the concept of cleaner production technology should be employed in the unit operation/process in wastewater treatment plant as well as textile manufacturing procedure to minimize the levy on the pollutants discharge. Unit mass discharge estimations of unit process (estimated in this study) in major water quality parameters (SS, BOD, COD, TN and TP) based on land were similar to those of composite process (estimated by National Institute of Environmental Research). But the unit mass discharge estimations of unit process in BOD and CODmn based on total sale were much higher than those of composite one while in SS, TN and TP similar to each other. For the detailed estimation of the imposed payment, unit mass estimation based on unit process should be further emphasized.

• Nuclear Engineering and Technology
• /
• 제31권5호
• /
• pp.506-511
• /
• 1999

The pilot system for radioactive liquid laundry waste was developed with treatment capacity, 1ton/hr and set up in the Yong Kwang unit #4. The system is composed of tank module, RO systems and a UV/$H_2O$$_2$photo-oxidation unit. The RO system consists of the BW unit (low-pressure RO for brackish water desalination) and the SW unit (high-pressure RO for seawater desalination). The BW unit possesses 4 RO membranes and it can reduce the feed water volume down to 1/10. This concentrated feed water can be reduced again up to 1/10 in its volume in the SW unit composed of 4 RO membranes. The UV/$H_2O$$_2$ photo-oxidation process unit was used for the detergent degradation. The operation of the pilot system was carried out and verified in its capability through the continuous operation and concentration operation using the actual liquid waste from the power plant. The design criteria and data for industrialization were yielded. The efficiency of the UV/$H_2O$$_2$ photo-oxidation process and the optimum operational procedure were evaluated. The decontamination factors for radioactive cobalt and cesium were measured. This on-site test showed the experimental result in the DF$\geq$300 and volume reduction factor$\geq$100.

• Journal of Chest Surgery
• /
• 제16권1호
• /
• pp.83-90
• /
• 1983

During the period of March 1981 to September 1982 a series of survey has been done on the value of amylase in blood and urine of 24 patients who went through the operation of heart surgery, for congenital and acquired heart diseases, with extracorporeal circulation at the Department of Thoracic _ Cardiovascular Surgery, School of Medicine, Hanyang University. In order to analyze the iteration and inter-relation of the value of amylase in blood and urine and the extra corporeal circulation time. The duration of extra-corporeal circulation time up to 60 minutes was classified as Group A while above 60 minutes was classified as Group B. The results are as follow; 1. 3 patients [23.07%] among 13 patients of Group A and 3 patients [27.27%] among 11 patients, showed increased amylase value after the surgery. 2. The average value in blood after operation was 120.3190.71 unit in Group A and 130.90113.15 unit in Group B. It was 11.59 units [9.63%] higher in Group A than in Group B. 3. 1 patient [7.7%] among 13 patients of Group A and 2 patients[18.18%] among 11 patients of Group B, the frequency of Group B was 10.48% higher. 4. The average Value of amylase in urine after the surgery was 111.9254.87 unit in Group A and 151.54111.17 unit in Group B. It was 39.62 unit [32.72%] higher in Group A than in Group B. 5. The longer the duration of extra corporeal circulation time showed the higher the amylase value in blood and urine after the operation. 6. Although the value of amylase in blood and urine was increased after operation, no patients Were found to have developed clinical pancreatitis.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.108-113
• /
• 2009

Buildings with multi-complex spaces designed for architectural values and functional requirements give rise to technical challenges in terms of energy efficiency and thermal comfort. Since spaces in such buildings are connected with openings with geometrical complexity, it is hard to define zoning plan and to control heating/cooling loads effectively. This paper presents a case study on the evaluation of operation strategy for a building with multi-complex spaces using computer simulation. The modelling methodology and the results of the simulations are also described.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1028-1031
• /
• 1996

Dynamic scheduling is very important in constructing CIM and improving productivity of chemical processing systems. Computation at the scheduling level requires mostly a long time to generate an optimal schedule, so it is difficult to immediately respond to actual process events in real-time. To solve these problems, we developed dynamic scheduling algorithms such as DSMM(Dynamic Shift Modification Method), PUOM(Parallel Unit Operation Method) and UVVM(Unit Validity Verification Method). Their main functions are to minimize the effects of unexpected disturbances such as process time variations and unit failure, to predict a makespan of the updated dynamic schedule and to modify schedule desirably in real-time responding to process time variations. As a result, the algorithms generate a new pertinent schedule in real-time which is close to the original schedule but provides an efficient way of responding to the variation of process environment. Examples in a shampoo production batch process illustrate the efficiency of the algorithms.

• 한국수소및신에너지학회논문집
• /
• 제3권2호
• /
• pp.63-69
• /
• 1992

2개의 단위전지를 제작하여 각각 산소와 공기를 산화제로 하여 조업하였다. 산소를 사용한 단위전지의 350시간 조업후의 개전압 강하는 30mV였고 내부저항도 증가하였다. 공기를 사용한 단위천지의 250시간 조업후의 개전압강하는 130mV였고 산소를 사용한 경우와는 개전압 차이는 90mV였다. 공기를 이용한 단위전지의 조업 성능을 향상시키기 위하여는 전해질의 공급방법과 전극의 물질전달특성에 관한 연구가 필요하다.