• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.11
• /
• pp.2849-2865
• /
• 2012

In order to block mobile junk messages automatically, many studies on spam filters have applied machine learning algorithms. Most previous research focused only on the accuracy rate of spam filters from the view point of the algorithm used, not on individual user's preferences. In terms of individual taste, the spam filters implemented on a mobile device have the advantage over spam filters on a network node, because it deals with only incoming messages on the users' phone and generates no additional traffic during the filtering process. However, a spam filter on a mobile phone has to consider the consumption of resources, because energy, memory and computing ability are limited. Moreover, as time passes an increasing number of feature words are likely to exhaust mobile resources. In this paper we propose a spam filter model distributed between a users' computer and smart phone. We expect the model to follow personal decision boundaries and use the uniform resources of smart phones. An authorized user's computer takes on the more complex and time consuming jobs, such as feature selection and training, while the smart phone performs only the minimum amount of work for filtering and utilizes the results of the information calculated on the desktop. Our experiments show that the accuracy of our method is more than 95% with Na$\ddot{i}$ve Bayes and Support Vector Machine, and our model that uses uniform memory does not affect other applications that run on the smart phone.

• Journal of Communications and Networks
• /
• v.8 no.1
• /
• pp.13-20
• /
• 2006

In cellular mobile communications, how to achieve optimum system capacity with limited frequency spectrum is one of the main research issues. Many dynamic channel assignment (DCA) schemes have been proposed and studied to allocate the channels more efficiently, thus, the capacity of cellular systems is improved. Reuse partitioning (RP) is another technique to achieve higher capacity by reducing the overall reuse distance. In this paper, we present a network-based DCA scheme with the implementation of RP technique, namely dynamic reuse partitioning with interference information (DRP-WI). The scheme aims to minimize the effect of assigned channels on the availability of channels for use in the interfering cells and to reduce their overall reuse distances. The performance of DRP-WI is measured in terms of blocking probability and system capacity. Simulation results have confirmed the effectiveness of DRP-WI scheme. Under both uniform and non-uniform traffic distributions, DRP-WI exhibits outstanding performance in improving the system capacity. It can provide about 100% capacity improvement as compared to conventional fixed channel assignment scheme with 70 system channels.

• Journal of Communications and Networks
• /
• v.18 no.4
• /
• pp.567-579
• /
• 2016

Several energy saving techniques in cellular wireless networks such as active base station (BS) selection, transmit power budget adaptation and user association have been studied independently or only part of these aspects have been considered together in literature. In this paper, we jointly tackle these three problems and propose an integrated framework, called dynamic cell reconfiguration (DCR). It manages three techniques operating on different time scales for ultimate energy conservation while guaranteeing the quality of service (QoS) level of users. Extensive simulations under various configurations, including the real dataset of BS topology and utilization, demonstrate that the proposed DCR can achieve the performance close to an optimal exhaustive search. Compared to the conventional static scheme where all BSs are always turned on with their maximum transmit powers, DCR can significantly reduce energy consumption, e.g., more than 30% and 50% savings in uniform and non-uniform traffic distribution, respectively.

• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.123-137
• /
• 2001

도로표지는 도로상에서 도로이용자가 원하는 목적지까지 쉽게 도착할 수 있도록 안내해 주는 기능을 갖는 도로부속물로 꼭 필요한 곳에, 눈에 잘 띄도록, 간단 명료하게 의미가 전달될 수 있도록 설치되어야 한다. MUTCD (Manual On Uniform Traffic Control Devices)의 교통통제설비의 기본요건처럼 무엇보다도 표지판을 보고 필요한 행동을 취하는데 있어서 안전과 시인성이 확보되도록 여유 있게 설치되어야 한다. 그러나, 우리의 표지의 설치 및 운영상황은 그렇지 못하다는 데에서 본 연구는 시작되었다. 시인거리측면을 중심으로 우리나라와 외국 여러 나라의 그것을 비교한 결과, 우리의 규정에서는 판독거리의 중요한 변수인 표지판 정보수가 고려되지 않았음이 드러났다. 따라서, 본고에서는 정보수에 초점을 맞추어 속도와 정보수, 주행 차로 등의 변수를 고려한 표지판 시인거리 측정실험을 하였다. 실험은 현재 국도상에 설치되어 있는 표지판을 대상으로 GPS(Global Positioning System) 수신기를 이용하여 시인거리를 측정하여 진행하였다. 그 결과 실제 시인거리가 현재의 도로표지규정에 의한 시인거리와 다소 차이가 있음을 발견할 수 있었고, 판독거리에서 가장 큰 영향을 미치는 변수는 속도 > 정보수 > 주행차로의 순임을 분석할 수 있었다. 본 연구결과를 통하여 한 개의 물리적 표지내에 정보수가 많은 우리나라의 표지판에 현실적인 시인거리를 고려한 설치가 유도될 수 있을 것으로 기대되고, 향후 도로표지규정을 개정할 때에도 이 연구결과를 반영한 현실적인 규정의 재정립이 기대된다. 또한 표지판의 실제 크기, 글자 및 문안의 크기는 물론 판의 크기 및 여백의 설정도 재산정될 필요가 있으며 이에 대한 추후 연구가 필요하다고 사료된다.

• Journal of Internet Computing and Services
• /
• v.5 no.1
• /
• pp.41-49
• /
• 2004

Analytical performance evaluation is crucial for justifying the merit of the design of Multistage Interconnection Networks(MINs) in different operational conditions. While several analytical models have been proposed for the performance evaluation of MlNs, they are mainly for uniform traffics. Even the models for nonuniform traffics have various shortcomings. In this paper, an accurate model for the performance evaluation of multi buffered banyan-type MIN's under nonuniform traffic condition is obtained. The accuracy of proposed models are conformed by comparing with the results from simulation.

• Journal of Communications and Networks
• /
• v.4 no.3
• /
• pp.230-245
• /
• 2002

Usually the network-throughput maximization problem for constant-bit-rate (CBR) circuit-switched traffic is posed for a fixed offered load profile. Then choices of routes and of admission control policies are sought to achieve maximum throughput (usually under QoS constraints). However, similarly to the notion of channel “capacity,” it is also of interest to determine the “network capacity;” i.e., for a given network we would like to know the maximum throughput it can deliver (again subject to specified QoS constraints) if the appropriate traffic load is supplied. Thus, in addition to determining routes and admission controls, we would like to specify the vector of offered loads between each source/destination pair that “achieves capacity.” Since the combined problem of choosing all three parameters (i.e., offered load, admission control, and routing) is too complex to address, we consider here only the optimal determination of offered load for given routing and admission control policies. We provide an off-line algorithm, which is based on Lagrangian techniques that perform robustly in this rigorously formulated nonlinear optimization problem with nonlinear constraints. We demonstrate that significant improvement is obtained, as compared with simple uniform loading schemes, and that fairness mechanisms can be incorporated with little loss in overall throughput.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.44-52
• /
• 1998

In this paper, we proposed a node architecture and cell routing strategies for ATM applications in WDM multihop networks. The proposed node architecture employs the optical delay loop for storing the cell which is failed in out-link contention. This optical delay loop allows the delay of one cell without the electro-optic conversion. Therefore, we can get the advantages of S&F(Store-and-Forward) routing in Deflection-based all-optical networks. To support the ATM applications efficiently. we considered the transmission priority of ATM cell so that high priority cell can be transmitted with lower loss and shorter delay than low priority one. Two kinds of routing strategies are designed for this architecture: Scheme-Ⅰand Scheme-Ⅱ. Scheme-Ⅰapplies S&F routing to high cell and Deflection routing to low cell, i.e., high cells are routed along the shortest path based on S&F routing, but low cells are deflected or lost. Schem-Ⅱ is similar to Scheme-Ⅰexcept that low cells can occupy the optical loop if it is available. This Scheme-Ⅱ increases the utilization of network resources without decreasing the throughput of high cell by reducing the low cell loss rate when traffic load is low. Simulation results show that our routing strategies have better performance than conventional ones under non-uniform traffic as well as uniform traffic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2539-2548
• /
• 2015

Overcoming inter-cell interference and spectrum scarcity are major issues in heterogeneous cellular networks. Static Frequency reuse schemes have been proposed as an effective way to manage the spectrum and reduce ICI(Inter cell Interference) in cellular networks. In a kind of static frequency reuse scheme, the allocations of transmission power and subcarriers in each cell are fixed prior to system deployment. This limits the potential performance of the static frequency reuse scheme. Also, most of dynamic frequency reuse schemes did not consider small cell and the network environment when the traffic load of each cell is heavy and non-uniform. In this paper, we propose an inter-cell resource allocation algorithm that dynamically optimizes subcarrier allocations for the multi-cell heterogeneous networks. The proposed dynamic frequency reuse scheme first finds the subcarrier usage in each cell-edge by using the exhaustive search and allocates subcarrier for all the cells except small cells. After that it allocates subcarrier for the small cell and then iteratively repeats the process. Proposed dynamic frequency reuse scheme performs better than previous frequency reuse schemes in terms of the throughput by improving the spectral efficiency due to it is able to adapt the network environment immediately when the traffic load of each cell is heavy and non-uniform.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.141-148
• /
• 2017

Over the past 30 years, the business effects of the improvement project at black spot have been decreasing since 2010, with a reduction in the amount of government spending, coupled with proposing a uniform improvement plan. In order to promote more efficient improvement projects, it is necessary to evaluate the efficiency of local governments and improve the business methods of local governments with low efficiency. However, more sophisticated efficiency analysis methods are needed. Because in previous studies have been limited to the analysis of effects before and after the project through the simple before-after analysis. For this purpose, this study analyzed the efficiency of improvement project at black spot by local governments in Gyeonggi-do using DEA to compare and analyze efficiency in various fields. As a result, Goyang, Seongnam, Paju, Hanam and Yangju showed high efficiency local governments. For local governmetns with low efficiency, the improvement projets to improve efficiency were divided into civil engineering work, structure work, pavement work, additional work and transportation work, and the appropriate construction ratios of each local government were analyzed and presented.

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.675-685
• /
• 2014

This paper develops a differentiated pricing strategy over each segment of expressways based on the second-best pricing method for reducing congestion. To this end, a bi-level problem is proposed, in which the upper level of the model is formulated to determine toll level of each segment for minimizing traffic congestion, whereas the lower level of the model is formulated as a variable demand assignment problem. The sensitivity analysis based algorithm is took placed to find optimal solutions of upper level model. An application of the proposed model uses the modified Sioux-Falls network. The results show that the segment-based differentiated pricing strategy performs better than the existing uniform pricing strategy in reducing traffic congestion. This study can be applied as a demand management method to relieve disutility of excessively congested segments of expressways.