• 한국통신학회논문지
• /
• 제22권7호
• /
• pp.1487-1504
• /
• 1997

In this paper, the two-stage variable block-size multiresolution motion algorithm is proposed for an interframe coding scheme in the wavelet decomposition. An optimal bit allocagion between motion vectors and the prediction error in sense of minimizing the total bit rate is obtained by the proposed algorithm. The proposed algorithm consists of two stages for motion estimatation and only the first stage can be separated and run on its own. The first stage of the algorithm introduces a new method to give the lower bit rate of the displaced frame difference as well as a smooth motion field. In the second stage of the algorithm, the technique is introduced to have more accurate motion vectors in detailed areas, and to decrease the number of motion vectors in uniform areas. The algorithm aims at minimizin gthe total bit rate which is sum of the motion vectors and the displaced frame difference. The optimal bit allocation between motion vectors and displaced frame difference is accomplished by reducing the number of motion vectors in uniform areas and it is based on a botom-up construction of a quadtree. An entropy criterion aims at the control of merge operation. Simulation resuls show that the algorithm lends itself to the wavelet based image sequence coding and outperforms the conventional scheme by up to the maximum 0.28 bpp.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.166-169
• /
• 2006

We fabricated hexagonal copper sulfide $Cu_2S$ nanowires to obtain a larger contact area of $Cu_2S/CdS$ solar cell. Copper sulfide nanowires were grown on Cu foil at room temperature by gas-sol id reaction. The size, density and shape of nanowires seemed to be affected by the change or reaction time temperature, crystallographic orientation of Cu foil, and molar ratio of the mixed gas. We controled the length and the diameter of the nanowires and we obtained suitable nanowire arrays which has fitting size for uniform deposition with n-type CdS. CdS layer was deposited on the nanowire array by electrodeposition and it seemed to be uniform. The $Cu_2S/CdS$ nanowires/CdS junction showed diode characteristics, A large contact area is expected with the $Cu_2S/CdS$ nanowire structure as compared with the $Cu_2S/CdS$ thin film.

• 생태와환경
• /
• 제37권3호통권108호
• /
• pp.297-303
• /
• 2004

수서 생태계에서 생물막 성장을 고찰하기 위해 2차원 셀룰라오토마톤 (CA) 모델을 구현하였다. 영양물 농도와 연계하여 CA의 단순한 지역 규칙을 세균 개체군의 성장을 나타내는데 적용하였다. 초기 세균 분포는 낮은 영양물 농도에서 개체군 크기와 생물막 형태를 결정하는데 중요한 역할을 하였다. 집중분포에서는 균일분포나 마구잡이분포에 비해 개체군 크기가 느리게 증가하였다. 반면 공극률은 다른 초기 분포에 비해 균일분포에서 높게 나타나는 경향을 보였다.

• 대한금속재료학회지
• /
• 제50권1호
• /
• pp.59-63
• /
• 2012

Studying the long-range ordering of nanopores on the anodic aluminum oxide (AAO) membranes under a hard anodization (HA) approach is crucial in producing well-aligned nanopores on the AAO membranes. Electro-polishing in a mixture of ethanol and perchloric acid for 5 min removed marks formed by rolling and produced flat surfaces on aluminum substrates. The AAO was formed by the first HA process, providing seeds for the subsequent production of uniform AAO nanopores. The second HA process carried out on the seeds produced well-aligned, uniform AAO nanopores. The AAO nanopores, varying in size and shape, were observed with voltages applied for HA. This study provides a route for controlling the size and shape of AAO nanopores by changing the applied voltages.

• 한국정보통신학회논문지
• /
• 제25권4호
• /
• pp.530-536
• /
• 2021

LBP 알고리즘은 지역적 질감표현이라는 특성을 가지고 있기 때문에 기준영상과 샘플 영상의 추출 위치와 크기에 따라 전혀 다른 결과를 얻을 수 있다. 이러한 단점을 해결하기 위하여 본 논문에서는 먼저 LBP 기본특성을 조사하고, 기준영상(100×100)의 크기를 영상내의 대부분의 특성을 포함할 수 있도록 하고, 임의의 지점에서 추출된 샘플영상(40×40)을 선택한다. 기준영상의 LBP와 샘플영상의 LBP 간의 상관관계를 이용하여 기준영상의 LBP에서의 매칭위치를 찾은 후, 카이분석 방법을 사용하여 샘플영상과 가장 일치하는 기준영상을 찾는 방법을 제시한다.

• 한국응용과학기술학회지
• /
• 제34권2호
• /
• pp.357-366
• /
• 2017

천연색소는 색을 발현할 수 있는 물질로서 식품, 화장품, 의약품 등에 사용된다. 천연색소는 동 식물에서 추출하여 만들기 때문에 크기가 균일하지 않으며 특히 적색색소의 경우, 다른 색의 색소에 비해 친유성이 강해 수용액 상태에서 쉽게 응집이 되는 경향이 있다. 또한 응집에 의한 크기변화로 인해 색의 재현이 어려운 문제점이 있다. 적색색소로 기존에 사용했던 동물성 색소인 코치닐 추출 색소는 알레르기를 유발하고 식용으로서의 거부감이 있는 등의 문제점으로 인하여 사용이 기피되는 추세이다. 본 연구에서는 적색의 식물성 색소인 라이코펜 추출물과 치자황색소를 사용하였고 Ball-milling을 이용하여 색소의 크기를 균일하게 만든 후 Asymmetrical flow field-flow fractionation(AsFlFFF), Dynamic light scattering(DLS)를 이용하여 크기를 분석하고 색차계를 이용하여 색을 확인하는 연구를 진행하였다. 실험결과 milling 전에는 색소 입자의 크기가 크고 크기분포가 넓었으나, milling 후에는 크기가 감소하고 크기분포가 좁아짐을 확인하였다. 색차계 측정 결과, milling 시간이 증가함에 따라 밝기, 적색도, 황색도가 높아져서 밝은 적색을 나타내었다.

• Structural Monitoring and Maintenance
• /
• 제7권2호
• /
• pp.85-107
• /
• 2020

Dynamic responses of porous piezoelectric and metal foam nano-size plates have been examined via a four variables plate formulation. Diverse pore dispersions named uniform, symmetric and asymmetric have been selected. The piezoelectric nano-size plate is subjected to an external electrical voltage. Nonlocal strain gradient theory (NSGT) which includes two scale factors has been utilized to provide size-dependent model of foam nanoplate. The presented plate formulation verifies the shear deformations impacts and it gives fewer number of field components compared to first-order plate model. Hamilton's principle has been utilized for deriving the governing equations. Achieved results by differential quadrature (DQ) method have been verified with those reported in previous studies. The influences of nonlocal factor, strain gradients, electrical voltage, dynamical load frequency and pore type on forced responses of metal and piezoelectric foam nano-size plates have been researched.

• 열처리공학회지
• /
• 제7권4호
• /
• pp.277-287
• /
• 1994

The effect of grain size on the tensile properties and fatigue behavior of austenitic high Mn steel has been investigated. The recrystallized austenite grain size of the cold rolled high Mn steel was increased as the annealing temperature increased from $600^{\circ}C$ to $1000^{\circ}C$. Larger austenite grain size decreased the yield strength and the tensile strength, and increased the uniform elongation due to transformation of some austenite into twins or E-martensite phase during deformation. Austenite grain refinement increased the tendency to form dislocation cells, instead. The specimen annealed at $1000^{\circ}C$ with large grain size showed lower fatigue crack propagation rate in low ${\Delta}K$ region due to rougher fracture surface caused by formation of deformation twins during fatigue at the crack tip region.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1998년도 추계학술대회 및 발표대회 강연 및 발표논문 초록집
• /
• pp.10-10
• /
• 1998

The growth process of solid grains in a liquid matrix is usually explained in tem1S of Ostwald ripening. The variation of growth (dissolution) rate as a function of grain size during Ostwald ripening predicted that the dissolution rate becomes very large as grain size decreases but the growth rate of a large grain is rather limited. Therefore. a rather uniform size distribution of grain size is maintained once after the quasi-equilibrium state is reached. Quite frequently, however, the exaggerated grain growth (EGG) is observed to occur: only a limited number of grains grow exceptionally. From the observation that the EGG occurs only for the faceted grains with apparently straight solid-liquid interfaces, the EGG is suggested to be the consequence of growth process controlled by 2-dimensional nucleation. In this study, the result by computer calculation on the grain growth process controlled by various mechanisms will be given.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.20-23
• /
• 1996

The block matching algorithm for the motion estimation is relatively simple to implement, and thus widely applied in image sequence coding such as H.261, MPEG- I and MPEG-2. Most techniques of the block matching method use fixed-size blocks for the motion estimation. And their success relies on the assumption that the motion within each block is uniform. But if the block size is increased to reduce the number of motion vectors for high data compression, the estimated image brings about many errors. In this paper, the variable-sized blocks are used to solve this problem. And the top down method is used to select the block size.